ceph-ansible/roles/ceph-osd/defaults/main.yml

---
# Variables here are applicable to all host groups NOT roles

# This sample file generated by generate_group_vars_sample.sh

# Dummy variable to avoid error because ansible does not recognize the
# file as a good configuration file when no variable in it.
dummy:

# You can override default vars defined in defaults/main.yml here,
# but I would advice to use host or group vars instead


###########
# GENERAL #
###########

fetch_directory: fetch/

# Even though OSD nodes should not have the admin key
# at their disposal, some people might want to have it
# distributed on OSD nodes. Setting 'copy_admin_key' to 'true'
# will copy the admin key to the /etc/ceph/ directory
copy_admin_key: false


####################
# OSD CRUSH LOCATION
####################

# /!\
#
# BE EXTREMELY CAREFUL WITH THIS OPTION
# DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING
#
# /!\
#
# It is probably best to keep this option to 'false' as the default
# suggests it. This option should only be used while doing some complex
# CRUSH map. It allows you to force a specific location for a set of OSDs.
#
# The following options will build a ceph.conf with OSD sections
# Example:
# [osd.X]
# osd crush location = "root=location"
#
# This works with your inventory file
# To match the following 'osd_crush_location' option the inventory must look like:
#
# [osds]
# osd0 ceph_crush_root=foo ceph_crush_rack=bar

crush_location: false
osd_crush_location: "'root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}'"


##############
# CEPH OPTIONS
##############

# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
fsid: "{{ cluster_uuid.stdout }}"
cephx: true

# Devices to be used as OSDs
# You can pre-provision disks that are not present yet.
# Ansible will just skip them. Newly added disk will be
# automatically configured during the next run.
#


# Declare devices to be used as OSDs
# All scenario(except 3rd) inherit from the following device declaration

#devices:
#  - /dev/sdb
#  - /dev/sdc
#  - /dev/sdd
#  - /dev/sde

devices: []


#'osd_auto_discovery'  mode prevents you from filling out the 'devices' variable above.
#  You can use this option with First and Forth and Fifth OSDS scenario.
# Device discovery is based on the Ansible fact 'ansible_devices'
# which reports all the devices on a system. If chosen all the disks
# found will be passed to ceph-disk. You should not be worried on using
# this option since ceph-disk has a built-in check which looks for empty devices.
# Thus devices with existing partition tables will not be used.
#
osd_auto_discovery: false


# !! WARNING !!
# #
# # /!\ ENABLE ONLY ONE SCENARIO AT A TIME /!\
# #
# #  !! WARNING !!
#

# I. First scenario: journal and osd_data on the same device
# Use 'true' to enable this scenario
# This will collocate both journal and data on the same disk
# creating a partition at the beginning of the device
# List devices under 'devices' variable above or choose 'osd_auto_discovery'


journal_collocation: false


# II.  Second scenario:  N journal devices for N OSDs
# Use 'true' for 'raw_multi_journal' to enable this scenario
# List devices under 'devices' variable above and 
# write journal devices for those under 'raw_journal_devices'
# In the following example:
# * sdb and sdc will get sdf as a journal
# * sdd and sde will get sdg as a journal

# While starting you have 2 options:
# 1. Pre-allocate all the devices
# 2. Progressively add new devices
raw_multi_journal: false
#raw_journal_devices:
#  - /dev/sdf
#  - /dev/sdf
#  - /dev/sdg
#  - /dev/sdg
raw_journal_devices: []


# III. Use directory instead of disk for OSDs
# Use 'true' to enable this scenario

osd_directory: false
#osd_directories:
#  - /var/lib/ceph/osd/mydir1
#  - /var/lib/ceph/osd/mydir2
osd_directories: []


# IV. This will partition disks for BlueStore
# Use 'true' to enable this scenario
bluestore: false


# V. Encrypt osd data and/or journal devices with dm-crypt.
# Keys are stored into the monitors k/v store
# Use 'true' to enable this scenario
# Both journal and data are stored on the same dm-crypt encrypted device
dmcrypt_journal_collocation: false


# VI. Encrypt osd data and/or journal devices with dm-crypt.
# Keys are stored into the monitors k/v store
# Use 'true' to enable this scenario
# Journal and osd data are separated, each with their own dm-crypt device
# You must use raw_journal_devices and set your journal devices
dmcrypt_dedicated_journal: false


##########
# DOCKER #
##########

osd_containerized_deployment: false
osd_containerized_deployment_with_kv: false
kv_type: etcd
kv_endpoint: 127.0.0.1
kv_port: 4001
ceph_osd_docker_prepare_env: -e CLUSTER={{ cluster }} -e OSD_JOURNAL_SIZE={{ journal_size }} -e OSD_FORCE_ZAP=1
ceph_osd_docker_username: ceph
ceph_osd_docker_imagename: daemon
ceph_osd_docker_image_tag: latest
ceph_osd_docker_extra_env: -e CLUSTER={{ cluster }} -e CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE -e OSD_JOURNAL_SIZE={{ journal_size }}
ceph_osd_docker_devices: "{{ devices }}"
ceph_docker_on_openstack: false
ceph_config_keys: [] # DON'T TOUCH ME