ceph-ansible/docs/source/testing/scenarios.rst

.. _test_scenarios:

Test Scenarios
==============
Scenarios are distinct environments that describe a Ceph deployment and
configuration. Scenarios are isolated as well, and define what machines are
needed aside from any ceph-ansible configuration.

.. _scenario_files:

Scenario Files
==============
The scenario is described in a ``vagrant_variables.yml`` file, which is
consumed by ``Vagrant`` when bringing up an environment.

This yaml file is loaded in the ``Vagrantfile`` so that the settings can be
used to bring up the boxes and pass some configuration to ansible when running.

.. note:: The basic layout of a scenario is covered in :ref:`layout`

There are just a handful of required files, these sections will cover the
required (most basic) ones. Alternatively, other ceph-ansible files can be
added to customize the behavior of a scenario deployment.


.. _vagrant_variables:

``vagrant_variables.yml``
-------------------------
There are a few sections in the ``vagrant_variables.yml`` file which are easy
to follow (most of them are 1 line settings).


* **docker**: (bool) Indicates if the scenario will deploy docker daemons

* **VMS**: (int) These integer values are just a count of how  many machines will be
  needed. Each supported type is listed, defaulting to 0::

    mon_vms: 0
    osd_vms: 0
    mds_vms: 0
    rgw_vms: 0
    nfs_vms: 0
    rbd_mirror_vms: 0
    client_vms: 0
    iscsi_gw_vms: 0
    mgr_vms: 0

  For a deployment that needs 1 MON and 1 OSD, the list would look like::

    mon_vms: 1
    osd_vms: 1

* **RESTAPI**: (bool) Deploy RESTAPI on each of the monitor(s)
  restapi: true

* **CEPH SOURCE**: (string) indicate whether a ``dev`` or ``stable`` release is
  needed. A ``stable`` release will use the latest stable release of Ceph,
  a ``dev`` will use ``shaman`` (http://shaman.ceph.com)

* **SUBNETS**: These are used for configuring the network availability of each
  server that will be booted as well as being used as configuration for
  ceph-ansible (and eventually ceph). The two values that are **required**::

    public_subnet: 192.168.13
    cluster_subnet: 192.168.14

* **MEMORY**: Memory requirements (in megabytes) for each server, e.g.
  ``memory: 512``

* **interfaces**: some vagrant boxes (and linux distros) set specific
  interfaces. For Ubuntu releases older than Xenial it was common to have
  ``eth1``, for CentOS and some Xenial boxes ``enp0s8`` is used. **However**
  the public Vagrant boxes normalize the interface to ``eth1`` for all boxes,
  making it easier to configure them with Ansible later.

.. warning:: Do *not* change the interface from ``eth1`` unless absolutely
             certain that is needed for a box. Some tests that depend on that
             naming will fail.

* **disks**: The disks that will be created for each machine, for most
  environments ``/dev/sd*`` style of disks will work, like: ``[ '/dev/sda', '/dev/sdb' ]``

* **vagrant_box**: We have published our own boxes to normalize what we test
  against. These boxes are published in Atlas
  (https://atlas.hashicorp.com/ceph/). Currently valid values are:
  ``ceph/ubuntu-xenial``, and ``ceph/centos7``

The following aren't usually changed/enabled for tests, since they don't have
an impact, however they are documented here for general knowledge in case they
are needed:

* **ssh_private_key_path** : The path to the ``id_rsa`` (or other private SSH
  key) that should be used to connect to these boxes.

* **vagrant_sync_dir** : what should be "synced" (made available on the new
  servers) from the host.

* **vagrant_disable_synced_folder** : (bool) when disabled, it will make
  booting machines faster because no files need to be synced over.

* **os_tuning_params** : These are passed onto ceph-ansible as part of the
  variables for "system tunning". These shouldn't be changed.


.. _vagrant_file:

``Vagrantfile``
---------------
The ``Vagrantfile`` should not need to change, and it is symlinked back to the
``Vagrantfile`` that exists in the root of the project. It is linked in this
way so that a vagrant environment can be isolated to the given scenario.


.. _hosts_file:

``hosts``
---------
The ``hosts`` file should contain the hosts needed for the scenario. This might
seem a bit repetitive since machines are already defined in
:ref:`vagrant_variables` but it allows granular changes to hosts (for example
defining an interface vs. an IP on a monitor) which can help catch issues in
ceph-ansible configuration. For example::


    [mons]
    mon0 monitor_address=192.168.5.10
    mon1 monitor_address=192.168.5.11
    mon2 monitor_interface=eth1

.. _group_vars:

``group_vars``
--------------
This directory holds any configuration change that will affect ceph-ansible
deployments in the same way as if ansible was executed from the root of the
project.

The file that will need to be defined always is ``all`` where (again) certain
values like ``public_network`` and ``cluster_network`` will need to be defined
along with any customizations that ceph-ansible supports.


.. _scenario_wiring:

Scenario Wiring
---------------
Scenarios are just meant to provide the Ceph environment for testing, but they
do need to be defined in the ``tox.ini`` so that they are available to the test
framework. To see a list of available scenarios, the following command (ran
from the root of the project) will list them, shortened for brevity::

    $ tox -l
    ...
    jewel-ansible2.2-centos7_cluster
    ...

 These scenarios are made from different variables, in the above command there
 are 3:

* jewel: the Ceph version to test
* ansible2.2: the Ansible version to install
* ``centos7_cluster``: the name of the scenario

The last one is important in the *wiring up* of the scenario. It is a variable
that will define in what path the scenario lives. For example, the
``changedir`` section for ``centos7_cluster`` that looks like::

  centos7_cluster: {toxinidir}/tests/functional/centos/7/cluster

The actual tests are written for specific daemon types, for all daemon types,
and for specific use cases (e.g. journal collocation), those have their own
conventions as well which are explained in detail in :ref:`test_conventions`
and :ref:`test_files`.

As long as a test scenario defines OSDs and MONs, the OSD tests and MON tests
will run.


.. _scenario_conventions:

Conventions
-----------

.. _scenario_environment_configuration:

Environment configuration
-------------------------

.. _scenario_ansible_configuration:

Ansible configuration
---------------------