This commit makes sure purge playbooks remove those file if for any reason they
have been left.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1920900
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to slow down the playbook execution time by migrating
all the `ceph-crash` instances in a serial way. Let's remove the
`serial: 1` so the migration is achieved in a parallel way.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we aren't deploying enough OSD daemon, so it fails like following:
```
stderr: 'Error ERANGE: pool id 10 pg_num 256 size 2 would mean 1536 total pgs, which exceeds max 1500 (mon_max_pg_per_osd 250 * num_in_osds 6)'
```
Let's increase the value of `mon_max_pg_per_osd` in order to get around
this issue in the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds more documentation to the configuration and usage of
containerizerd deployment.
Closes: #6198
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running the rolling_update.yml playbook and adding the dashboard
component in the same time then the requirement (like container packages)
aren't installed.
This could lead to a failure in case of using authentication on the
container registry because the playbook will try to login on the registry
but podman/docker aren't yet installed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1903504
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918650
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The monitoring node running grafana needs the rhcs tools repostory
enabled in non containerized deployment to be able to install the
ceph-grafana-dashboards rpm package.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918650
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit pins the ansible-lint version to 4.3.7 as ceph-ansible isn't
compatible with recent changes in 5.0.0
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise, the job fails when it tries to create a bucket with `s3cmd mb`
command because we have too many PGs per OSD.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
if `rgw_zonegroupmaster` is not defined at the rgw instance level in
`rgw_instances` it will fallback to a wrong variable (`rgw_zonemaster`).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925247
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since b105549 we don't install node-exporter on client nodes so we should
also exclude the client node from the node-exporter upgrade.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since eefe11d the grafana-server group has been renamed to monitoring
but the dashboard playbook wasn't updated.
This was still working due to the backward compatibility added in the
ceph-facts role.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The CentOS 8 vagrant box has finally been updated [1] with a recent
version (the latest one 2011 which means CentOS 8.3).
We don't need to download the vagrant libvirt box with a direct url
anymore from the CentOS infrastructure.
[1] https://app.vagrantup.com/centos/boxes/8
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
since master is now deploying quincy, we must update this.
Otherwise, it will fail like following:
```
Error EPERM: require_osd_release cannot be lowered once it has been set
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Due to recent changes in shaman, there's a chance it returns the wrong
repository from architecture point of view.
We can query shaman and ask for the correct architecture to get around
this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph mgr command output is printed on stderr instead of stdout which
prevent to set the changed flag to false if the module is already enabled.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There's no reason to not use the ceph_osd_flag module to set/unset osd
flags.
Also if there's no OSD nodes in the inventory then we don't need to
execute the set/unset play.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of doing some scripting via the shell module, we can use the
parted ansible module to check the boot flag on partitions.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Those devices (db/wal) are never zapped in lvm batch deployment.
Iterating over `dedicated_devices` and `bluestore_wal_devices` fixes
this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1922926
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to set the rgw_instances_all fact for each node. We can
rely on run_once for that one.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the zonegroup or the zone doesn't have a realm associated then
it's not possible to modify that ressource.
This patch allows to retrieve the current realm id and compare it to
the realm id from the realm in parameter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rerunning the cephadm-adopt.yml playbook the radosgw realm,
zonegroup and zone tasks will fail because the task isn't
idempotent.
Using the radosgw ansible modules solves that problem.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Rerunning the cephadm_adopt module on an already adopted daemon will
fail because the cephadm adopt command isn't idempotent.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918424
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If the cephadm-adopt.yml fails during the first execution and some
daemons have already been adopted by cephadm then we can't rerun
the playbook because the old container won't exist anymore.
Error: no container with name or ID ceph-mon-xxx found: no such container
If the daemons are adopted then the old systemd unit doesn't exist anymore
so any call to that unit with systemd will fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918424
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already do that in the other systemd templates (mgr, mds, etc..)
and would present to add workaround in other orchestration tool.
This change is for containerized deployment only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1882724
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
since `ceph-rgw` may be called from `ceph-handler` in some contexts we
should avoid rerunning it unnecessarily.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If for some reason `get_zonegroup()` returns a failure, we must handle
and make the module exit properly instead of failing with the following
python trace:
```
Traceback (most recent call last):
File "./AnsiballZ_radosgw_zone.py", line 247, in <module>
_ansiballz_main()
File "./AnsiballZ_radosgw_zone.py", line 234, in _ansiballz_main
exitcode = debug(sys.argv[1], zipped_mod, ANSIBALLZ_PARAMS)
File "./AnsiballZ_radosgw_zone.py", line 202, in debug
runpy.run_module(mod_name='ansible.modules.radosgw_zone', init_globals=None, run_name='__main__', alter_sys=True)
File "/usr/lib64/python3.6/runpy.py", line 205, in run_module
return _run_module_code(code, init_globals, run_name, mod_spec)
File "/usr/lib64/python3.6/runpy.py", line 96, in _run_module_code
mod_name, mod_spec, pkg_name, script_name)
File "/usr/lib64/python3.6/runpy.py", line 85, in _run_code
exec(code, run_globals)
File "/home/vagrant/.ansible/tmp/ansible-tmp-1610728441.41-685133-218973990589597/debug_dir/ansible/modules/radosgw_zone.py", line 467, in <module>
main()
File "/home/vagrant/.ansible/tmp/ansible-tmp-1610728441.41-685133-218973990589597/debug_dir/ansible/modules/radosgw_zone.py", line 463, in main
run_module()
File "/home/vagrant/.ansible/tmp/ansible-tmp-1610728441.41-685133-218973990589597/debug_dir/ansible/modules/radosgw_zone.py", line 425, in run_module
zonegroup = json.loads(_out)
File "/usr/lib64/python3.6/json/__init__.py", line 354, in loads
return _default_decoder.decode(s)
File "/usr/lib64/python3.6/json/decoder.py", line 339, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib64/python3.6/json/decoder.py", line 357, in raw_decode
raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This update the grafana container tag to 6.7.4.
The RHCS version is now based on the RHCS 5 container image which is
also based on 6.7.4.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The "latest" ceph container tag references the latest stable release
(octopus at the moment). "latest" is an alias on "latest-octopus".
On the devel branch we should use "latest-master" tag instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Due to missing condition on `cephx` variable, cephx disabled deployments
are broken.
This commit fixes this.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1910151
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When executing a command via the run_command method and passing some
data with stdin then the default behavior is to add append a newline.
This breaks the value of password used by our modules.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Remove duplicate fake_params parameter as it's already defined later
as a dict (instead of an empty list).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since the default of `osd_objectstore` has changed as of 3.2, some
deployments might have a mix of filestore and bluestore OSDs on a same
node. In some specific cases, there's a possibility that a filestore OSD
shares a journal/db device with a bluestore OSD. We shouldn't try to
redeploy in this context because ceph-volume will complain. (either
because in lvm batch you can't pass partition or about gpt header).
The safest option is to skip the migration on the node when such a mix
is detected or force all osds including those already using bluestore
(option `force_filestore_to_bluestore=True` has to be passed as an extra var).
If all OSDs are using filestore, then they will be migrated to
bluestore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1875777
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit checks the length of `virtual_ips` doesn't exceed the length
of `groups[rgwloadbalancer_group_name]`.
It also ensure this variable is defined when
`groups[rgwloadbalancer_group_name]` contains at least one node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau