The dashboard/monitoring stack can be deployed via the dashboard_enabled
variable. But there's nothing similar if we can to remove that part only
and keep the ceph cluster up and running.
The current purge playbooks remove everything.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786691
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8e4ef7d6da)
Since pacific is a stable release then we don't need to use shaman for getting
the pacific build.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In order to avoid false positive in the CI that I've been unable to
reproduce.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7fd1c2298)
Given there's no pacific packages available at
https://download.ceph.com, let's use shaman in order to test against
Ceph Pacific
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying the ceph OSD via the packages then the ceph-osd@.service
unit is configured as enabled-runtime.
This means that each ceph-osd service will inherit from that state.
The enabled-runtime systemd state doesn't survive after a reboot.
For non containerized deployment the OSD are still starting after a
reboot because there's the ceph-volume@.service and/or ceph-osd.target
units that are doing the job.
$ systemctl list-unit-files|egrep '^ceph-(volume|osd)'|column -t
ceph-osd@.service enabled-runtime
ceph-volume@.service enabled
ceph-osd.target enabled
When switching to containerized deployment we are stopping/disabling
ceph-osd@XX.servive, ceph-volume and ceph.target and then removing the
systemd unit files.
But the new systemd units for containerized ceph-osd service will still
inherit from ceph-osd@.service unit file.
As a consequence, if an OSD host is rebooting after the playbook execution
then the ceph-osd service won't come back because they aren't enabled at
boot.
This patch also adds a reboot and testinfra run after running the switch
to container playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881288
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This playbook isn't needed anymore, we can achieve this operation by
running main playbook with `--limit` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This job is redundant with 'collocation' job.
The only difference is osd/rgw collocation so let's add this usecase in
'collocation'.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19d683d7acfb5344b38ac1ba4c123dcdd4d80f35)
since we've dropped ubuntu testing on PRs and nightlies, we don't need
these references anymore in tox files.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should use `latest-master-devel` for switch_to_containers job.
Otherwise it might happen we actually downgrade the ceph version when
the image used is older than the rpm initially used for installing ceph.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise it might try to use the system installed version of ansible
when there's one available.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The add-mgrs scenario is still using the testinfra command instead of
pytest so the tests exectution are failling.
ERROR: InvocationError for command could not find executable testinfra
This also adds the missing --ssh-config option to testinfra.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commits removes these two symlinks.
They were there for backward compatibility and were marked deprecated as
of stable-4.0
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The shrink scenarios don't need the docker variables (except for OSD).
Removing pytest for shrink-mgr.
Adding environment variables for xxx_to_kill ansible variable.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit replaces the playbook used for add_osds job given
accordingly to the add-osd.yml playbook removal
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds a playbook to be played before we run purge playbook,
it first creates an rbd image then map an rbd device on client0 so the
purge playbook will try to unmap it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It doesn't make sense to test the old 3.0.x container images with
nautilus+ ceph releases.
Also disable the dashboard deployment and switch to bluestore backend.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The secondary vagrant variables didn't have the grafana vm variable
set which create an vagrant error.
There was an error loading a Vagrantfile. The file being loaded
and the error message are shown below. This is usually caused by
an invalid or undefined variable.
This patch also changes the ssh-extra-args parameter to ssh-common-args
to get the same values for ssh/sftp/scp. Otherwise we can see warnings
from ansible and some tasks are failing.
[WARNING]: sftp transfer mechanism failed on [mon0]. Use ANSIBLE_DEBUG=1
to see detailed information
It also updates the ssh-common-args value for the rgw-multisite scenario
to reflect the ANSIBLE_SSH_ARGS environment variable value.
Finally changing the IP addresses due to the Vagrant refact done in the
commit 778c51a
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
The ANSIBLE_CONFIG value wasn't set correctly for two scenarios. This
environment variable doesn't use '-F'.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
test switch_to_containers job against the latest ceph@master
ceph-container image tag available.
In order to be sure the ceph release deployed in the first step (non
containerized deployment) isn't newer than the tag used for the
containerized migration (which would mean we try to downgrade the
version).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and RGW and then runs shrink-rgw.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
this setting is not needed here since we explicitely set it for
container and non container context.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new functional test that deploys Ceph cluster with three nodes for
MON, OSD and RBD Mirror and, then, runs shrink-rbdmirror.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MGR and then runs shrink-mgr.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MDS and then runs shrink-mds.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
adding back a sleep 30s after nodes have rebooted before running
testinfra.
This was removed accidentally by d5be83e
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Harald Jensås
Igor
Rishabh Dave