Commit Graph

135 Commits (debug-cv-tests)

Author SHA1 Message Date
Guillaume Abrioux 15b91cef90 osd: drop filestore support
filestore is about to be removed. This commit removes the filestore
support in ceph-ansible.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2023-03-03 15:00:29 +01:00
Guillaume Abrioux e47288ef6c ceph-config: make sure rgw_instances is set
We need to make sure `rgw_instances` is set before `ceph.conf` is
rendered. Otherwise, the `ceph-crash` play in the main playbook updates
(via ceph-handler) the `ceph.conf` on rgw nodes and removes rgw instances
sections.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2141604

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2023-02-07 10:56:06 +01:00
Seena Fallah 613773b2a3 ceph-config: fix overriding osd_memory_target
When the value is overriding in `ceph_conf_overrides`, there is no need to calculate and set `osd_memory_target` again as we wanted to override the conf by our desired value.

Signed-off-by: Seena Fallah <seenafallah@gmail.com>
2022-10-10 10:58:47 +02:00
Seena Fallah 57b0890aff ceph-config: don't check for devices on existing osds
When osd_auto_discovery is true the `devices` var will be empty (as the disks have holders).
Also in general there is no need to check for devices to list the devices with ceph-volume as we have `default({})` on the stdout in `num_osds` set fact in the next task

Signed-off-by: Seena Fallah <seenafallah@gmail.com>
2022-10-10 10:58:47 +02:00
Seena Fallah ac4dfa7526 ceph-config: always set _osd_memory_target
this should be set when rolling_update is true as well, otherwise, it will reset to default on the upgrade

Signed-off-by: Seena Fallah <seenafallah@gmail.com>
2022-10-10 10:58:47 +02:00
Guillaume Abrioux b40e4bfe60 ceph-config: allow overriding osd_memory_target
If `osd_memory_target` is set in group_vars, the default value (4Gb)
should be overridden.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2118544

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2022-08-16 15:39:25 +02:00
Guillaume Abrioux f19dcb266a config: use osd_memory_target value from ceph_conf_overrides if defined
otherwise it's impossible to override `osd_memory_target`
via `ceph_conf_overrides`.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2056675

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2022-08-10 16:32:21 +02:00
Guillaume Abrioux e2076e439b config: do not always set _osd_memory_target
When 'osd_memory_target' is overridden in ceph_conf_overrides.
The task that sets the fact `osd_memory_target` in the ceph-config role
should be skipped.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2056675#c11

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2022-08-08 09:46:03 +02:00
Guillaume Abrioux cf4a430d0b config: followup on 8a5628b51
Add missing `--cluster {{ cluster }}` on task
`set osd_memory_target` in the main.yml file of the
ceph-config role.
Also it moves the task after ceph configuration file is actually written.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2022-07-11 19:11:54 +02:00
Guillaume Abrioux 8a5628b516 config/osd: various fixes
- sets `osd_memory_target` per osd host.
- ceph.conf refactor (osd)

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2056675

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2022-07-11 13:57:32 +02:00
Guillaume Abrioux 5283fa6e96 config: fix indentation in main.yml
For consistency and readability.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2022-07-11 13:57:32 +02:00
Dmitriy Rabotyagov 2eb0a88a67 Use upstream config_template collection
In order to reduce need of module
internal maintenance and to join forces on plugin development,
it's proposed to switch to using upstream version of
config_template module.

As it's shipped as collection, it's installation for end-users
is trivial and aligns with general approach of shipping extra modules.

Signed-off-by: Dmitriy Rabotyagov <noonedeadpunk@ya.ru>
2022-01-18 20:22:10 +01:00
Guillaume Abrioux 31a0f2653d config: reset num_osds
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.

Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```

makes `num_osds` be incremented each time `ceph-config` is called.

We have to reset it in order to get the correct number of expected OSDs.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2021-03-15 10:41:28 +01:00
Alex Schultz a7f2fa73e6 Use ansible_facts
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant.  In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.

Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
2021-03-08 20:54:02 +01:00
Guillaume Abrioux 71a5e666e3 rgw: multisite refact
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.

Now you can define a rgw instance like following:

```
rgw_instances:
  - instance_name: 'rgw0'
    rgw_zonemaster: false
    rgw_zonesecondary: true
    rgw_zonegroupmaster: false
    rgw_realm: 'france'
    rgw_zonegroup: 'zonegroup-france'
    rgw_zone: paris-00
    radosgw_address: "{{ _radosgw_address }}"
    radosgw_frontend_port: 8080
    rgw_zone_user: jacques.chirac
    rgw_zone_user_display_name: "Jacques Chirac"
    system_access_key: P9Eb6S8XNyo4dtZZUUMy
    system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
    endpoint: http://192.168.101.12:8080
```

Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.

Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2021-01-27 15:46:43 +01:00
Dimitri Savineau 827b23353f ceph-config: fix ceph-volume lvm batch report
Since the major ceph-volume lvm batch refactoring, the report value
is different.
Before the refact, the report was a dict with the OSDs list to be created
under the "osds" key.
After the refact, the report is a list of dict.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-12-15 21:19:04 +01:00
Dimitri Savineau aa6e1f20ea Revert "config: Always use osd_memory_target if set"
This reverts commit 4d1fdd2b05.

This breaks the backward compatibility with previous osd_memory_target
calculation and we could have a value lower than the minimum value allowed
(896M) which causes some ceph commands to fail (like ceph assimilate-conf).

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-12-12 06:56:32 +01:00
Gaudenz Steinlin 4d1fdd2b05 config: Always use osd_memory_target if set
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.

Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
2020-11-13 09:13:58 +01:00
Gaudenz Steinlin 15044da030 osd: Fix number of OSD calculation
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.

Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
2020-11-03 14:33:35 +01:00
Guillaume Abrioux 900c0f4492 ceph-config: ceph.conf rendering refactor
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-10-21 13:22:16 +02:00
Dimitri Savineau 50104650e7 add missing boolean filter
Otherwise this will generate an ansible warning about the missing
filter.

[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-09-28 20:45:01 +02:00
Dimitri Savineau 4808523403 rolling_update: remove msgr2 migration
In Pacific we're are sure that users already achieved the msgr2 because
that was introduced in Nautilus.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-09-25 19:14:42 +02:00
Dimitri Savineau 62bd41f0d4 ceph-config: remove ceph_release from ceph.conf.j2
We don't use ceph_release variable in the ceph.conf jinja template.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-09-25 19:13:57 +02:00
Guillaume Abrioux 448cc280b7 common: don't enable debug log on ceph-volume calls by default
ceph-volume can generate large logs at some point.

debug logs by definition should be enabled only when debugging.

Let's make it customizable with a variable which is set to `False` by
default.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-08-11 15:03:20 +02:00
Guillaume Abrioux 0a581a6e60 config: only add related rgw section
there's no need to add each rgw section on all rgw nodes.
With this commit, only related rgw section are rendered.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-08-03 14:47:27 +02:00
Dimitri Savineau 1361e84a4e radosgw: remove INST_PORT environment variable
This variable isn't consumed by the container so we can remove it.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-07-02 16:52:29 +02:00
Guillaume Abrioux 7dd68b9ac1 rgw: fix multi instances scaleout
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.

The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:

```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```

This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-07-02 10:39:50 -04:00
Guillaume Abrioux 1bb9860dfd osd: use default crush rule name when needed
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-03-31 14:49:38 -04:00
Guillaume Abrioux 152c2caa9f config: remove legacy option in ceph.conf.j2
This option has been deprecated (As of 0.51).
By the way, ceph-ansible already sets the
auth_{service,client,cluster}_required variables.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623586

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-03-16 09:49:36 -04:00
Guillaume Abrioux 60a2e28189 rgw: add multi-instances support when deploying multisite
This commit adds the multi-instances when deploying rgw multisite

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
2020-03-12 16:44:48 -04:00
Ali Maredia 71f55bd54d rgw multisite: enable more than 1 realm per cluster
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.

The rgw hosts now need to be grouped into zones
and realms in the inventory.

.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.

Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands

remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.

Signed-off-by: Ali Maredia <amaredia@redhat.com>
2020-03-04 12:58:13 -05:00
Guillaume Abrioux e7bc079405 config: fix external client scenario
When no monitor group is present in the inventory, this task fails.
This affects only non-containerized deployments.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-01-31 12:02:15 +01:00
Guillaume Abrioux 483adb5d79 common: add a default value for ceph_directories_mode
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-01-22 09:35:35 +01:00
Dimitri Savineau 4e7fb5d45a drop use_fqdn variables
This has been deprecated in the previous releases. Let's drop it.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2020-01-15 11:32:39 +01:00
Guillaume Abrioux fd1718f379 config: exclude ceph-disk prepared osds in lvm batch report
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2020-01-10 00:04:22 +01:00
Dimitri Savineau bc701860d5 ceph-iscsi: notify rbd target services
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2019-10-16 16:25:40 +02:00
Artur Fijalkowski 011270ca69 global: make directories mode parameterizable
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.

Closes: #2920

Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-08-23 09:38:17 +02:00
Kevin Coakley e11cbbbcb1 ceph-config: Set changed_when to false on fact gathering statements
The "run 'ceph-volume lvm batch --report' to see how many osds are to be
created" and "run 'ceph-volume lvm list' to see how many osds have already been
created" statements only register the lvm_batch_report and lvm_list variables.
Running those ceph-volume commands should never produce a change on the system.
Adding changed_when: false prevents irrelevant change messages from Ansible.

Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
2019-08-22 17:27:58 +02:00
Giulio Fidente d526803c6c Add radosgw_frontend_ssl_certificate parameter
This is necessary when configuring RGW with SSL because
in addition to passing specific frontend options, civetweb
appends the 's' character to the binding port and beast uses
ssl_endpoint instead of endpoint.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1722071
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
2019-07-02 14:14:37 -04:00
Guillaume Abrioux 33eed78d17 containers: improve logging
bindmount /var/log/ceph on all containers so it's possible to retrieve
logs from the host.

related ceph-container PR: ceph/ceph-container#1408

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710548

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-06-28 13:30:36 -04:00
Dimitri Savineau 34f9d51178 tests: Update ansible ssh_args variable
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.

Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2019-06-17 09:24:24 +02:00
L3D ab54fe20ec ansible: use 'bool' filter on boolean conditionals
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```

Now appended ``| bool`` on a lot of the affected variables.

Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.

Closes: #4022

Signed-off-by: L3D <l3d@c3woc.de>
2019-06-06 10:21:17 +02:00
Guillaume Abrioux 6a6785b719 nfs: support internal Ganesha with external ceph cluster
This commits allows to deploy an internal ganesha with an external ceph
cluster.

This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-06-03 13:34:38 +02:00
Guillaume Abrioux 6ca7372a2d config: fix ipv6
As of nautilus, if you set `ms bind ipv6 = True` you must explicitly set
`ms bind ipv4 = False` too, otherwise OSDs will still try to pick up an
IPv4 address.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710319

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-05-21 10:38:00 -04:00
Rishabh Dave 739a662c80 improve coding style
Keywords requiring only one item shouldn't express it by creating a
list with single item.

Signed-off-by: Rishabh Dave <ridave@redhat.com>
2019-04-23 15:37:07 +02:00
Guillaume Abrioux a4bc7bda51 update: refact msgr2 migration
this commit refact the msgr2 protocol introduction.

If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-04-18 11:16:11 +02:00
Andrew Schoen 67453853ff rolling_update: set num_osds to the number of running osds
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.

We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.

Signed-off-by: Andrew Schoen <aschoen@redhat.com>
2019-04-18 10:55:11 +02:00
Dimitri Savineau e471bce76b allow using ansible 2.8
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2019-04-17 16:57:37 +02:00
Guillaume Abrioux 4d35e9eeed osd: remove variable osd_scenario
As of stable-4.0, the only valid scenario is `lvm`.
Thus, this makes this variable useless.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-04-11 11:57:02 -04:00
Dimitri Savineau d17b1b48b6 rgw: change default frontend on nautilus
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2019-04-09 17:21:51 +02:00