this drops the following parameters:
- monitor_address_block
- monitor_interface
- monitor_address
The monitor address will be automatically set from `public_network` parameter.
Signed-off-by: Guillaume Abrioux <gabrioux@ibm.com>
* Make common params of container args in a var to avoid duplication
* The /var/lib/ceph/crash mount was missing after 637ca81c9c
* Add CEPH_USE_RANDOM_NONCE as it's needed when running inside container (can be removed for squid later)
* Add NODE_NAME as some part of ceph code relies on this var
* add default logging opts for
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
keep the ceph.conf very simple.
manage the common options such as `public_network` with `ceph_config`
module.
Signed-off-by: Guillaume Abrioux <gabrioux@ibm.com>
As it's always being set in ceph.conf template, it leads to having duplicated osd_memory_target keys in rendered ceph conf while defining one in ceph_conf_overrides.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
filestore objectstore will be gone in the next Ceph release.the
This drops the filestore support in ceph-ansible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Exclude lvm_volumes defined disks from existing osds while it has been counted by the "count number of osds for lvm scenario" task.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
* Exclude device from lvm_volumes while osd_auto_discovery is true
* Sum num_osds on both lvm_volumes and devices list
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
We need to make sure `rgw_instances` is set before `ceph.conf` is
rendered. Otherwise, the `ceph-crash` play in the main playbook updates
(via ceph-handler) the `ceph.conf` on rgw nodes and removes rgw instances
sections.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2141604
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When the value is overriding in `ceph_conf_overrides`, there is no need to calculate and set `osd_memory_target` again as we wanted to override the conf by our desired value.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
When osd_auto_discovery is true the `devices` var will be empty (as the disks have holders).
Also in general there is no need to check for devices to list the devices with ceph-volume as we have `default({})` on the stdout in `num_osds` set fact in the next task
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
this should be set when rolling_update is true as well, otherwise, it will reset to default on the upgrade
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
If `osd_memory_target` is set in group_vars, the default value (4Gb)
should be overridden.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2118544
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When 'osd_memory_target' is overridden in ceph_conf_overrides.
The task that sets the fact `osd_memory_target` in the ceph-config role
should be skipped.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2056675#c11
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add missing `--cluster {{ cluster }}` on task
`set osd_memory_target` in the main.yml file of the
ceph-config role.
Also it moves the task after ceph configuration file is actually written.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In order to reduce need of module
internal maintenance and to join forces on plugin development,
it's proposed to switch to using upstream version of
config_template module.
As it's shipped as collection, it's installation for end-users
is trivial and aligns with general approach of shipping extra modules.
Signed-off-by: Dmitriy Rabotyagov <noonedeadpunk@ya.ru>
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.
Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```
makes `num_osds` be incremented each time `ceph-config` is called.
We have to reset it in order to get the correct number of expected OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the major ceph-volume lvm batch refactoring, the report value
is different.
Before the refact, the report was a dict with the OSDs list to be created
under the "osds" key.
After the refact, the report is a list of dict.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This reverts commit 4d1fdd2b05.
This breaks the backward compatibility with previous osd_memory_target
calculation and we could have a value lower than the minimum value allowed
(896M) which causes some ceph commands to fail (like ceph assimilate-conf).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In Pacific we're are sure that users already achieved the msgr2 because
that was introduced in Nautilus.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there's no need to add each rgw section on all rgw nodes.
With this commit, only related rgw section are rendered.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This option has been deprecated (As of 0.51).
By the way, ceph-ansible already sets the
auth_{service,client,cluster}_required variables.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make it so that more than one realm, zonegroup,
or zone can be created during a run of the rgw
multisite ansible playbooks.
The rgw hosts now need to be grouped into zones
and realms in the inventory.
.yml files need to be created in group_vars
for the realms and zones. Sample yaml files
are available.
Also remove multsite destroy playbook
and add --cluster before radosgw-admin commands
remove manually added rgw_zone_endpoints var
and have ceph-ansible automatically add the
correct endpoints of all the rgws in a rgw_zone
from the information provided in that rgws hostvars.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When no monitor group is present in the inventory, this task fails.
This affects only non-containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
The "run 'ceph-volume lvm batch --report' to see how many osds are to be
created" and "run 'ceph-volume lvm list' to see how many osds have already been
created" statements only register the lvm_batch_report and lvm_list variables.
Running those ceph-volume commands should never produce a change on the system.
Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Seena Fallah
Guillaume Abrioux
Guillaume Abrioux
Dmitriy Rabotyagov
Alex Schultz
Dimitri Savineau
Gaudenz Steinlin
Ali Maredia
Artur Fijalkowski
Kevin Coakley