There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
If you use the 'dev' factor, the testing scenario will
use repos from shaman.ceph.com. You can define CEPH_DEV_BRANCH
and CEPH_DEV_SHA1 to specify which repo you'd like to test.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the `test_osds_listen_on_*` consider OSDs will always listen on tcp port
with consecutive tcp port number starting from `6800`.
Eg.
If you have 2 OSDs, tests will assume it should listen on 2 ports for each
network (`public_network` and `cluster_network`), therefore:
`6800, 6801, 6802, 6803`
but sometime it doesn't happen this way and you can get OSDs listening
on tcp port like this :
`6800, 6801, 6802, 6805`
Then the test are failing while it shouldn't.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we are hitting this bug :
https://bugzilla.redhat.com/show_bug.cgi?id=1324587
eg:
`failed: internal error: Monitor path /var/lib/libvirt/qemu/domain-bs-docker-cl
uster-dmcrypt-journal-collocation_mon0_1499294943_ba9faf7bf296533177f6/monitor.
sock too big for destination`
and we can't upgrade libvirt in our CI for some reason
we need to get the directories name shorter in order to workaround this
issue
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The scenario set in `group_vars/all` for
docker-cluster-dmcrypt-journal-collocation is not the correct one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We were setting journal_collocation and used raw_journal_devices which
is definitely wrong. We should just stick with devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since ceph.conf.j2 has been updated to add ipv6 support, the different
variables in many scenarios need to be updated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Restore the check_socket that was removed by `5bec62b`.
This commit also improves the logging in `restart_*_daemon.sh` scripts
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Without this, we don't test the mgr role so we need to add it.
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
This is just nice to see in the test output so we know exactly what
configuration is going to be used.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Instead of relying on environment variables and --extra-vars simply
modify the group_vars/all that ships with the specific testing scenario
to enable ceph_rchs testing.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
In the environment we were testing on, MTU was set to 1500 which causes
download failures of our yum repos. There might be a better way to set
this instead of doing it here in ansible.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Decorating a test method directly with a pytest mark seems to break if
the test function does not explicitly define all pytest fixtures it
expects to recieve.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
journal_collocation was enabled so the test suite was testing this
scenario and obviously failed since there is no second partition to
verify.
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes the error: Call to virDomainCreateWithFlags failed: internal
error: Monitor path
/var/lib/libvirt/qemu/domain-docker-cluster-dedicated-journal_osd0_1487692576_dbfc21d851071d3e2cd2/monitor.sock
too big for destination
Signed-off-by: Sébastien Han <seb@redhat.com>
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
If no OSDs were created the command would fail and because we were using
check_output it would throw an exception and mark all OSD tests as ERROR.
This keeps tests from running that might tell us why the OSDS were not created.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
We need to test the cluster name support in this CI as well. This
commit might be prone to debate because it tests 2 things in a single
scenario. We first test our ability to deploy a cluster AND the cluster
name support. However it's easier to do it this way and will reduce the
amount of time for testingg. If we don't do this we will have a
duplicate those 2 existing tests into new ones 'only' to test the
cluster name support.
Signed-off-by: Sébastien Han <seb@redhat.com>
The osds are named differently for systemd in containerized deployments
so this new parameter is used to make that change transparent in the
tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This playbook could be used in the future to install anything else we
need on these nodes for testing purposes.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Andrew Schoen
Sébastien Han
Alfredo Deza
Guillaume Abrioux
Ali Maredia