The ansible_lsb fact is based on the lsb package (lsb-base,
lsb-release or redhat-lsb-core).
If the package isn't installed on the remote host then the fact isn't
populated.
--------
"ansible_lsb": {},
--------
Switching to the ansible_distribution_release fact instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As per bz1718981, this commit adds higher values to check
the quorum status. This is helpful for several OSP deployments
that fail during the scale up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1718981
Signed-off-by: fpantano <fpantano@redhat.com>
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
Add a variable to support the allow_embedding support.
See ceph/ceph-ansible/issues/4084 for details.
Fixes: #4084
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
This add support for rgw loadbalancer based on HAProxy and Keepalived.
We define a single role ceph-rgw-loadbalancer and include HAProxy and
Keepalived configurations all in this.
A single haproxy backend is used to balance all RGW instances and
a single frontend is exported via a single port, default 80.
Keepalived is used to maintain the high availability of all haproxy
instances. You are free to use any number of VIPs. A single VIP is
shared across all keepalived instances and there will be one
master for one VIP, selected sequentially, and others serve as
backups.
This assumes that each keepalived instance is on the same node as
one haproxy instance and we use a simple check script to detect
the state of each haproxy instance and trigger the VIP failover
upon its failure.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
This commits allows to deploy an internal ganesha with an external ceph
cluster.
This requires to define `external_cluster_mon_ips` with a comma
separated list of external monitors.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1710358
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There is no need to have default values for these variables in each roles
since there is no corresponding host groups
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds support for podman in dashboard-related roles. It also drops
the creation of custom network for the dashboard-related roles as this
functionality works in a different way with podman.
Signed-off-by: Boris Ranto <branto@redhat.com>
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
RHCS 4 will be based on Nautilus and only usable on RHEL 8.
Updated the default ceph_rhcs_version to 4 and update the rhcs
repositories to rhcs 4 with RHEL 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this commit refact the msgr2 protocol introduction.
If it's a fresh install, let's go with v2 only.
If we upgrade to nautilus, we should go with v2+v1 syntax to ensure
nothing breaks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because 5c98e361df could be seen as a non
backward compatible change this commit reverts it and bring back package
dependencies installation support.
Let's just modify the default value instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These packages aren't needed anymore.
They were needed for ceph-init-detect buti as of ceph-init-detect doesn't exist
anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1683885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the previous approach was wrong.
checking if `item.key` is in `osd_auto_discovery_exclude` (`['dm-',
'loop']`) is incorrect because it will obviously not match. Therefore,
the condition will return `True` whatever the device we are checking.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new `osd_auto_discovery_exclude` to give the possibility of
excluding some devices in auto_discovery scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- also add `--foreground` which seems to fix some issue we are facing when
using timeout with `podman`.
- use this fact in the `is ceph running already?` task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
nfs-ganesha v2.5 and 2.6 have hit EOL. Install nfs-ganesha v2.7
stable that is currently being maintained.
Signed-off-by: Ramana Raja <rraja@redhat.com>
With this, we could have multiple rgw instances on a single host
with a single run, don't have to use rgw-standalone.yml which does not
seems able to bind ports separately.
If you want to have multiple rgw instances, just change 'radosgw_instances'
to the number you want, which defaults to 1.
Not compatible with Multi-Site yet.
Signed-off-by: guihecheng <guihecheng@cmiot.chinamobile.com>
sometimes we play the whole role `ceph-defaults` just to access the
default value of some variables. It means we play the `facts.yml` part
in this role while it's not desired. Splitting this role will speedup
the playbook.
Closes: #3282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We want to test podman on f29 non-atomic, atomic is not a hard
requirement. However, if you want to get podman then you will have to
install it first before running the playbook.
Signed-off-by: Sébastien Han <seb@redhat.com>
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is not needed to play these tasks on nodes that are not in rgw
group.
Always playing this code makes `shrink_mon.yml` failing.
Typical error:
```
TASK [ceph-defaults : set_fact _radosgw_address to radosgw_interface - ipv4] ***
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-dev-shrink_mon/roles/ceph-defaults/tasks/set_radosgw_address.yml:21
Thursday 22 November 2018 12:34:51 +0000 (0:00:00.154) 0:00:12.371 *****
fatal: [localhost]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'ansible.vars.hostvars.HostVarsVars object' has no attribute u'ansible_eth1'
```
Indeed, `radosgw_interface` is the network interface on rgw only. It is
expected that this same interface doesn't exist on `localhost`, so, when
running `shrink_mon.yml`, the role `ceph-defaults` is called in
`hosts: localhost` and causes the playbook to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It seems Atomic 7.5 has podman already, however this is an old version
(0.4). The podman integration is targetting RHEL 8, so Fedora is
currently the closest to that.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is to add a granularity level.
We can have ceph specific variables that user shouldn't have to change
here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It is safer to use the list filter than the keys() method since the keys
method does have some interoperability issues between python2 and
python3 based ansible/jinja.
Signed-off-by: Boris Ranto <branto@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
if firewalld.service systemd unit is masked, the handler will fail when
trying to restart it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
fpantano
Rishabh Dave
Guillaume Abrioux
guihecheng
Boris Ranto
Radu Toader
Matthew Vernon
Ali Maredia
Ramana Raja
jtudelag
Sébastien Han
Neha Ojha