Some people use the switch playbook to perform upgrade so they end up in
the same situation than https://bugzilla.redhat.com/show_bug.cgi?id=1650572
This is applying the same fix as
729744c6a8.
We don't want to fail on key that are not present since they will get
created after the mons are updated. They will be created by the task
"create potentially missing keys (rbd and rbd-mirror)".
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit fixes the merge conflict that occurred during the
auto-backport and auto-merge of the commit
488281187e.
Also please note that the commit
488281187e was merged (on PR 3477)
"as it is" (despite of merge conflicts) which was not supposed to be
the case ideally. This had a side-effect that the feature of supporting
multiple NTP daemons (new ones are namely chronyd and timesyncd) was
also backported which is itself against the convention. For
consistency's sake the feature was backported to stable-3.1 as well.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
sometimes we play the whole role `ceph-defaults` just to access the
default value of some variables. It means we play the `facts.yml` part
in this role while it's not desired. Splitting this role will speedup
the playbook.
Closes: #3282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0eb56e36f8)
This task has to be called after the role `ceph-defaults` has been
played, otherwise, `mon_group_name` will never be known.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a12de3e048)
we want a default value for `mon_group_name`, not for
`groups[mon_group_name]`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d0b3cb7f85)
the OSD part of the purge delegates commands on monitor node, we need to
gather monitors facts to know the `ansible_hostname` fact that is used
in the `docker_exec_cmd` fact.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1a4a6ec855)
ceph-defaults relies on facts so we must gather facts before running it.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 62111ff53c)
Recently we introduced the default collocation of mon/mgr without the
need of a dedicated mgrs section. This means we have to stop the mgr
process on that machine too.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit fc6ebd8ebb)
Recently we introduced the collocation of mon and mgr by default, so we
don't need to have an explicit mgrs section for this. This means we have
to remove the mgr container on the mon machines too.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 325a159415)
# Conflicts:
# infrastructure-playbooks/purge-docker-cluster.yml
It's useful when running on CI to see what might remain on the machines.
So we list all the containers and images. We expect the list to be
empty.
We fail if we see containers running.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 2bcc00896f)
This commits adds the support for purging cluster that were deployed
with ceph-volume. It also separates nicely with a block intruction the
work to do when lvm is used or not.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 1751885bc9)
"fetch nfs-ganesha development repository"
This has to be pushed directly to stable-3.2 since master has diverged
Signed-off-by: Bruceforce <Bruceforce@users.noreply.github.com>
When one of the currently supported NTP services has been set up,
disable rest of the NTP services on Ceph nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 6fa757d343)
Merge ntp_debian.yml and ntp_rpm.yml into one (the new file is called
setup_ntp.yml) since they are almost identical. Also avoid repetition
of the common setup step for ntpd and chronyd services.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit b03ab60742)
# Conflicts:
# roles/ceph-infra/tasks/ntp_debian.yml
# roles/ceph-infra/tasks/ntp_rpm.yml
Json is a type structure which is always typed as a string, where before
this we were declaring a dict, which is not a json valid structure.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1663026
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 896676ee80)
There is no need to enforce `serial: 1` on client nodes.
Let's make it parameterizable by introducing a new *extra* variable
`client_update_batch`, if not filled this will default to `{{
ansible_forks }}`.
NOTE: this is only usable as an extra variable passed with
`-e client_update_batch=<num>`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650184
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 268f2cef82)
Add `any_errors_fatal: true` to all host sections in `site.yml.sample`
and `site-container.yml.sample` so that the playbook execution
ceases spontaneously and instantaneously when errors occurs.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 5f43dae593)
Since we deploy > purge > deploy the LVs are gone so we much recreate
them.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 656fbd2901)
- reintroduce `purge_cluster_container` and `purge_cluster_non_container`
on `stable-3.2`,
- remove all purge scenario based on ceph-disk,
- remove purge_lvm_osds_* scenarios.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
add iscsi support for both non containerized and containerized
deployment in purge playbooks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1651054
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 78116fa6db)
Based on https://github.com/ceph/ceph-container/pull/1269 and given
there are no stable packages and reliable repository, we disable nfs
ganesha temporarly.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 6c3ef90ebe)
Applying and passing the OSD_BLUESTORE/FILESTORE on the fly is wrong for
existing clusters as their config will be changed.
Typically, if an OSD was prepared with ceph-disk on filestore and we
change the default objectstore to bluestore, the activation will fail.
The flag osd_objectstore should only be used for the preparation, not
activation. The activate in this case detects the osd objecstore which
prevents failures like the one described above.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 4c51130198)
If an existing cluster runs this config, and has ceph-disk OSD, the
`expose_partitions` won't be expected by jinja since it's inside the
'old' if. We need it as part of the osd_scenario != 'lvm' condition.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1640273
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit bef522627e)
We don't want to fail on key that are not present since they will get
created after the mons are updated. They will be created by the task
"create potentially missing keys (rbd and rbd-mirror)".
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650572
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit ebc901c6af)
since 0.0.0.0 is the default radosgw address (not 'address'), not
configuring an address explicitly, and instead configuring the radosgw
interface, would result in 0.0.0.0 being used, instead of falling
through to section that inspects the interface config option.
backport note: this cannot be cherry-picked from master since this code
doesn't exist in master.
fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1655131
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
The code is now able (again) to start osds that where configured with
ceph-disk on a non-container scenario.
Closes: https://github.com/ceph/ceph-ansible/issues/3388
Signed-off-by: Sébastien Han <seb@redhat.com>
So we can avoid the following failure:
The conditional check 'hostvars[mon_host]['ansible_hostname'] in (ceph_health_raw.stdout | from_json)["quorum_names"] or hostvars[mon_host]['ansible_fqdn'] in (ceph_health_raw.stdout | from_json)["quorum_names"]
' failed. The error was: No JSON object could be decoded
We just need to set a default, the next iteration will have a more
complete json since the command won't fail.
Signed-off-by: Sébastien Han <seb@redhat.com>
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ed42262b37)
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d1fe32998)
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fdc438dd0d)
This is to add a granularity level.
We can have ceph specific variables that user shouldn't have to change
here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f1735e9bb0)
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7774069d45)
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d4c0960f04)
`hostvars[groups[mon_host]]['ansible_hostname']` seems to be a typo.
That should be `hostvars[mon_host]['ansible_hostname']`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7c99b6df6d)
We run an initial deployment with `osd_pool_default_size: 1` in
`ceph_conf_overrides`.
When re-running the playbook to test idempotency and handlers, we reset
`ceph_conf_overrides`, we must append a new value instead of just
overwritting it, otherwise, this can lead to error in the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f290e49df8)
each monitor node should select another monitor which isn't itself.
Otherwise, one node in the monitor group won't set this fact and causes
failure.
Typical error:
```
TASK [create potentially missing keys (rbd and rbd-mirror) when mon is containerized] ***
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-dev-update_docker_cluster/rolling_update.yml:200
Thursday 22 November 2018 14:02:30 +0000 (0:00:07.493) 0:02:50.005 *****
fatal: [mon1]: FAILED! => {}
MSG:
The task includes an option with an undefined variable. The error was: 'dict object' has no attribute u'mon2'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit af78173584)
Sébastien Han
Rishabh Dave
Guillaume Abrioux
Bruceforce
Kai Wembacher
Andrew Schoen
Noah Watkins
Ramana Raja