This is needed by ceph-exporter as it is parsing the socket by the number of dots.
Although the rgw_zone variable is only using for constructing the client name
and has nothing to do with multisiting.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 1121e6d98a)
nfs-ganesha support will be implemented in a separate playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@ibm.com>
(cherry picked from commit 675667e1d6)
`--state=enabled` isn't a valid filter so the unit from the packaging
never gets removed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2134917
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This playbook doesn't support less than 3 monitors present in the inventory.
Just like the rolling_update playbook, let's fail if less than
3 monitors are present.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2049132
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The balancer status is registered during the cephadm-adopt, rolling_update
and swith2container playbooks. But it is also used in the ceph-handler role
which is included in those playbooks too.
Even if the ceph-handler tasks are skipped for rolling_update and
switch2container, the balancer_status variable is erased with the skip task
result.
play1:
register: balancer_status
play2:
register: balancer_status <-- skipped
play3:
when: (balancer_status.stdout | from_json)['active'] | bool
This leads to issue like:
The conditional check '(balancer_status.stdout | from_json)['active'] | bool'
failed. The error was: Unexpected templating type error occurred on
({% if (balancer_status.stdout | from_json)['active'] | bool %} True
{% else %} False {% endif %}): expected string or buffer.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1982054
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph osd pool ls detail command is a subset of the ceph osd dump
command.
$ ceph osd dump --format json|wc -c
10117
$ ceph osd pool ls detail --format json|wc -c
4740
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the `set osd flags` block, run the Ceph commands that gather information
from the cluster (and don't make any changes to it) even when running in check
mode.
This allows the tasks that depend on the variables set by those tasks to
succeed in check mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
1303611 introduced tasks for disabling the pg_autoscaler on pools and
the balancer but thoses tasks are already executed on the first monitor
node so we don't need to add the run_once statement.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using python 2 and the task with a loop is skipped then it generates
an error.
Unexpected templating type error occurred on
({{ (pool_list.stdout | from_json)['pools'] }}): expected string or buffer
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The PG autoscaler can disrupt the PG checks so the idea here is to
disable it and re-enable it back after the restart is done.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the ceph-validate role before starting the switch to a containerized
deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1968177
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When collocating daemons, if we chown all files under `/var/lib/ceph` it
can cause issues for the collocated daemons that wouldn't have been
migrated yet.
This commit makes the playbook chown only the files corresponding to the
daemon being migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
There's no need to slow down the playbook execution time by migrating
all the `ceph-crash` instances in a serial way. Let's remove the
`serial: 1` so the migration is achieved in a parallel way.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current check makes no sense because it checks any of other monitor
than the one being played (either a previous one already converted or a
next that isn't yet converted) is present on the quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1909011
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
`ceph.target` should be disabled only. Otherwise, in collocation
scenario you stop other collocated services in the OSD play which isn't
what we want to do. Each daemon has its corresponding play for managing
the transition to container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1901865
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ignore 302,303 and 505 errors
[302] Using command rather than an argument to e.g. file
[303] Using command rather than module
[505] referenced files must exist
they aren't relevant on these tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
fa2bb3a only fix the symlink owner/group issue in the OSD play. If the
OSDs are collocated with other services like MONs and MGRs then the
chown command will fail.
$ find /var/lib/ceph/osd/ceph-0 -not -user 167 -execdir chown 167:167 {} +
chown: cannot dereference './block': Permission denied
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896448
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When deploying the ceph OSD via the packages then the ceph-osd@.service
unit is configured as enabled-runtime.
This means that each ceph-osd service will inherit from that state.
The enabled-runtime systemd state doesn't survive after a reboot.
For non containerized deployment the OSD are still starting after a
reboot because there's the ceph-volume@.service and/or ceph-osd.target
units that are doing the job.
$ systemctl list-unit-files|egrep '^ceph-(volume|osd)'|column -t
ceph-osd@.service enabled-runtime
ceph-volume@.service enabled
ceph-osd.target enabled
When switching to containerized deployment we are stopping/disabling
ceph-osd@XX.servive, ceph-volume and ceph.target and then removing the
systemd unit files.
But the new systemd units for containerized ceph-osd service will still
inherit from ceph-osd@.service unit file.
As a consequence, if an OSD host is rebooting after the playbook execution
then the ceph-osd service won't come back because they aren't enabled at
boot.
This patch also adds a reboot and testinfra run after running the switch
to container playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881288
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running the switch2container playbook on a Debian based system
then the systemd unit path isn't the same than Red Hat based system.
Because the systemd unit files aren't removed then the new container
systemd unit isn't take in count.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The task "remove old systemd unit file" under "switching from
non-containerized to containerized ceph rgw" only removes
the ceph-radosgw@.service file. The task should also remove
the ceph-radosgw.target file, like the "remove old systemd unit
files" tasks for the mons, mgrs, osds, etc, in order to clean up
all of the unused systemd unit files.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
By default, ansible gathers facts from facter and ohai if installed on
the remote nodes, given we don't need them, let's exclude these facts
from our facts gathering
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The systemd LOAD and ACTIVE fileds could have more than one space between
both values.
This update the systemd regex the same way we're using it in different
part of the code.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843500
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The workflow in this playbook should be the same than in rolling_update,
we should first set noout and nodeep-scrub flags before migrating the
first osd and unset osd flags after the last osd is migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit increases the default values for the following variable
consumed in switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook.
This also moves these variables in `ceph-defaults` role so the user can
set different values if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783223
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When a container is already running on a non containerized node then the
umount ceph partition task is skipped.
This is due to the container ps command which always returns 0 even if
the filter matches nothing.
We should run the umount task when:
1/ the container command is failing (not installed) : rc != 0
2/ the container command reports running ceph-osd containers : rc == 0
Also we should not fail on the ceph directory listing.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1616159
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When switching from a baremetal deployment to a containerized deployment
we only umount the OSD data partition.
If the OSD is encrypted (dmcrypt: true) then there's an additional
partition (part number 5) used for the lockbox and mount in the
/var/lib/ceph/osd-lockbox/ directory.
Because this partition isn't umount then the containerized OSD aren't
able to start. The partition is still mount by the system and can't be
remount from the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1616159
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit refacts the way we set `ceph_uid` fact in `ceph-facts` and
removes all `set_fact` tasks for `ceph_uid` in switch-to-containers playbook
to avoid duplicated code.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
By changing the set ownership command from using the file module in combination with a with_items loop to a raw chown command, we can achieve a 98% performance increase here.
On a ceph cluster with a significant amount of directories and files in /var/lib/ceph, the file module has to run checks on ownership of all those directories and files to determine whether a change is needed.
In this case, we just want to explicitly set the ownership of all these directories and files to the ceph_uid
Added context note to all set proper ownership tasks
Signed-off-by: Kevin Jones <kevinjones@redhat.com>
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Seena Fallah
Guillaume Abrioux
Dimitri Savineau
Benoît Knecht
Alex Schultz
Kevin Coakley
Kevin Jones