The trusted_ip_list parameter for the rbd-target-api service doesn't
support ipv6 address with bracket.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd87d69183)
Before this patch, the lvm2 package installation was done during the
ceph-osd role.
However we were running ceph-volume command in the ceph-config role
before ceph-osd. If lvm2 wasn't installed then the ceph-volume command
fails:
error checking path "/run/lock/lvm": stat /run/lock/lvm: no such file or
directory
This wasn't visible before because lvm2 was automatically installed as
docker dependency but it's not the same for podman on CentOS 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit de8f2a9f83)
since fd1718f379, we must use `_devices`
when deploying with lvm batch scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5558664f37)
There is no need to run this part of the playbook when upgrading the
cluter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit af6875706a)
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3496a0efa2)
We don't need to executed the grafana fact everytime but only during
the dashboard deployment.
Especially for ceph-grafana, ceph-prometheus and ceph-dashboard roles.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790303
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f940e695ab)
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Fixes: #4827
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fc02fc98eb)
This commit refact the condition in the loop of that task so all
potential osd ids found are well started.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790212
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 58e6bfed2d)
When ceph_rbd_mirror_configure is set to true we need to ensure that
the required variables aren't empty.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1760553
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4a065cebd7)
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5bd1cf40eb)
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cf8c6a3849)
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636508
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ef2cb99f73)
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ed36a11eab)
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1718f379)
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 86f3eeb717)
Only the ipv4 addresses from the nodes running the dashboard mgr module
were added to the trusted_ip_list configuration file on the iscsigws
nodes.
This also add the iscsi gateways with ipv6 configuration to the ceph
dashboard.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 70eba66182)
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3c31b19ab3)
411bd07d54 introduced a bug in handlers
using `handler_*_status` instead of `hostvars[item]['handler_*_status']`
causes handlers to be triggered in anycase even though
`handler_*_status` was set to `False` on a specific node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 30200802d9)
Since RHEL 8.1 we need to add the ganesha_t type to the permissive
SELinux list.
Otherwise the nfs-ganesha service won't start.
This was done on RHEL 7 previously and part of the nfs-ganesha-selinux
package on RHEL 8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786110
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d758125290)
The grafana-server group name was hardcoded for the grafana/prometheus
firewalld tasks condition.
We should we the associated variable : grafana_server_group_name
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2c06678cde)
Instead of using multiple dashboard_enabled condition in the
configure_firewall file we could just have the condition once
and include the dedicated tasks list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f4c261ef90)
When there's no mgr group defined in the ansible inventory then the
mgrs are deployed implicitly on the mons nodes.
If the dashboard is enabled then we need to open the dashboard port on
the node that is running the ceph mgr process (mgr or mon).
The current code only allow to open that port on the mgr nodes when they
are present explicitly in the inventory but not implicitly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783520
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4535985188)
that task is delegated on the first mon so we should always use the
`discovered_interpreter_python` from that node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5adb735c78)
A recent change in ceph/ceph prevent from having username in the
password:
`Error EINVAL: Password cannot contain username.`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0756fa467d)
This commit isolates and adds an explicit comment about variables not
intended to be modified by the user.
Fixes: #4828
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a234338eff)
Typical error:
```
type=AVC msg=audit(1575367499.582:3210): avc: denied { search } for pid=26680 comm="node_exporter" name="1" dev="proc" ino=11528 scontext=system_u:system_r:container_t:s0:c100,c1014 tcontext=system_u:system_r:init_t:s0 tclass=dir permissive=0
```
node_exporter needs to be run as privileged to avoid avc denied error
since it gathers lot of information on the host.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1762168
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d245eb7e7d)
The md devices (RAID software) aren't excluded from the devices list in
the auto discovery scenario.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1764601
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 014f51c2a4)
When using `osd_auto_discovery`, `devices` is built multiple times due
to multiple runs of `ceph-facts` role. It end up with duplicate
instances of a same device in the list.
Using `unique` filter when building the list fixes this issue.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 23b1f43897)
The wait_for ansible module doesn't support the backets on IPv6 address
so need to remove them.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1769710
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 55adc10be3)
In addition to the grafana container tag change, we need to do the same
for the prometheus container stack based on the release present in the
OSE 4.1 container image.
$ docker run --rm openshift4/ose-prometheus-node-exporter:v4.1 --version
node_exporter, version 0.17.0
build user: root@67fee13ed48f
build date: 20191023-14:38:12
go version: go1.11.13
$ docker run --rm openshift4/ose-prometheus-alertmanager:4.1 --version
alertmanager, version 0.16.2
build user: root@70b79a3f29b6
build date: 20191023-14:57:30
go version: go1.11.13
$ docker run --rm openshift4/ose-prometheus:4.1 --version
prometheus, version 2.7.2
build user: root@12da054778a3
build date: 20191023-14:39:36
go version: go1.11.13
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3e29b8d5ff)
in order to be able to call container_binary without having to run the
whole ceph-facts role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fe5ffe589e)
All containers are removed when systemd stops them.
There is no need to call this module in purge container playbook.
This commit also removes all docker_image task and remove all container
images in the final cleanup play.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1776736
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d23383a820)
When using the shortname, the URL for active alert launches with short
hostname and fails to connect to the server.
This commit changes the template in order to use the fqdn.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1765485
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a8d76d72d7)
This commit makes the ceph-dashboard role only printing ceph-dashboard
URL of the nodes present in grafana-server group
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1762163
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cc0c1ce301)
This is needed to avoid following error:
```
ERROR! The requested handler 'restart ceph mons' was not found in either the main handlers list nor in the listening handlers list
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1777829
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a43a872105)
Configuration of cephfs with an existing cluster using --limit used to fail
at different tasks while running with site-docker.yml
This commit addresses both of those tasks
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1773489
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
(cherry picked from commit 72c43cc5d9)
This will prevent failure of site-docker.yml with configs in doc.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1769760
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9a1f1626c3)
[1] introduced a regression on the fs.aio-max-nr sysctl value condition.
The enable key isn't a boolean but a string because the expression isn't
evaluated.
This string output "(osd_objectstore == 'bluestore')" is always true
because item.enable condition only matches non empty string. So the
sysctl value was applyied for both filestore and bluestore backend.
[2] added the bool filter to the condition but the filter always returns
false on string and the sysctl wasn't applyed at all.
This commit fixes the enable key value by evaluating the value instead
of using the string.
[1] https://github.com/ceph/ceph-ansible/commit/08a2b58
[2] https://github.com/ceph/ceph-ansible/commit/ab54fe2
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ece46d33be)
The latest grafana container tag is using grafana 6.x release which could
cause issue with the ceph dashboard integration.
Considering that the grafana container in RHCS 3 is based on 5.x then we
should use the same version.
$ docker run --rm rhceph/rhceph-3-dashboard-rhel7:3 -v
Version 5.2.4 (commit: unknown-dev)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2037fb87b6)
Even if this improves ceph-disk/ceph-volume performances then it also
impact the ceph-osd process.
The ceph-osd process shouldn't use 1024:4096 value for the max open
files.
Removing the ulimit option from the container engine and doing this kind
of change on the container side [1].
[1] https://github.com/ceph/ceph-container/pull/1497
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1702285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9a996aef7f)
This change adds two tasks to set grafana-api user and password
that are required to inject dashboard layouts to the external
grafana instance.
Without these two parameters the ceph-ansible playbook fails
showing an authorization error (HTTPError: 401 Client Error:
Unauthorized").
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1767365
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 41b8c17356)
Add ceph_docker_registry_username and ceph_docker_registry_password
variables in ceph-defaults role so they will be present in the group_vars
samples but commented.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1763139
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b33c476f16)
This commit adds the support of the ceph-iscsi stable repository when
use ceph_repository community instead of always using the devel
repositories.
We're still using the devel repositories for rtslib and tcmu-runner in
both cases (dev and community).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f2cb937193)
When deploying with packages then the ceph-container-common role isn't
executed so the registry authentication task is ignored.
Closes: #4636
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9ad000618f)
Dimitri Savineau
Guillaume Abrioux
Benoît Knecht
VasishtaShastry
fmount
Mihai Plasoianu