The value of doing this is fairly low compare to the added value.
So we remove these tasks, if rbd pool on Jewel doesn't have the right PG
value you can always increase it.
Signed-off-by: Sébastien Han <seb@redhat.com>
All keyring are getting copied to all nodes.
This commit fixes a leftover from a previous code refactor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498583
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the code regarding all `set_osd_pool_default_*`
related tasks by avoiding usage of useless `set_fact` to determine
whether a key is present in `ceph_conf_overrides`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The rbd pool is the default pool that gets created during ceph cluster
initializaiton. If we act on the rbd related operations too early, the
rbd pool does not exist yet. Move the call to perform rbd operations
to a later stage after other pools have been created.
The rbd_pool.yml playbook has all the operations related to the rbd pool.
Replace the always_run (deprecated) directive with check_mode.
Most of the ceph related tasks only need to run once. The run_once directive
executes the task on the first host.
The ceph sub-command to delete a pool is delete (not rm).
The changes submitted here were tested with this ceph version.
ceph version 0.94.9-9.el7cp (b83334e01379f267fb2f9ce729d74a0a8fa1e92c)
This upload includes these changes:
- Use the fail module (instead of assert).
- From luminous release, the rbd pool is no longer created by default.
Delete the code to create the rbd pool for luminous release
- Conform the .yml files to use the suggested syntax.
The commands are executed on the mcp nodes and I think shell ansible module
is the right one to use. The command module is used to execute commands on
remote nodes. I can make the change to use command module if that is
prefrerred.
This is to ensure `docker_exec_cmd` fact is set with the correct value
in case of daemons collocation
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits refacts the role ceph-mds
The goal here is to create cephfs in `ceph-mon` for both containerized
and non-containerized cases so we don't need the admin keyring on mds
nodes anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1488999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Using systemd module allows us to do in one task what we did in three
tasks:
- enable unit file,
- issue a `daemon-reload`,
- start the service
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This fixes the error :
```
The conditional check 'sestatus.stdout != 'Disabled'' failed.
```
that occurs when running on non rhel based system since the
`sestatus` fact is registered only on rhel based distribution.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Specify the timeout flag to ceph-create-keys, which causes it to time out
if a monitor quorum isn't achieved. This overrides the default timeout
of 10 minutes, causing ceph-ansible to fail faster in the event of cluster
network issues.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
need to use `hostvars[host]['XXX']` to retrieve the monitor
interface and/or radosgw interface.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1493920
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the rbd key was not pushed on rbd nodes because its keyring path was not
added in `ceph_config_keys`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We generate the ceph.conf on all the nodes through the
ceph-docker-common so there is no need to push it to the Ansible file.
Also this is breaking the ceph.conf template generation since we only
generate sections based on the host the ansible task is running on.
For example, what's typically happening, we bootstrap the monitor, we
get a ceph.conf generated for a mon only, we go on an osd, we generate
the ceph.conf with osd section (done by ceph-docker-common) but this
gets overwritten by the copy_config task of the ceph-osd role.
Signed-off-by: Sébastien Han <seb@redhat.com>
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
All keys are copied to all nodes.
This commit split that task in each roles so keys are copied to their
respective nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1488999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Less configuration for the user, the container inherit from the global
variables. No more container specific variables.
Signed-off-by: Sébastien Han <seb@redhat.com>
We must mask the image so we are sure that even if the system reboots
then the OSDs won't start.
Also remove Ceph udev rules if found on the system prior to deploy
containers. If we don't do this we are exposed to conflicts between udev
rules and sytemd unit files.
Also add the CI will now test the migration from a non-containerized cluster to a
containerized cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Some deployments can't copy infrastructure playbooks outside of the
infrastructure-playbooks directory. Thus they use ANSIBLE_ROLES_PATH to
overcome this. However some roles have 'playbook_dir' hardcoded, which
results in wrong path since the execution comes from
infrastructure-playbooks. Basically the role triggered by a playbook
from infrastructure-playbooks believes that the roles are in
infrastructure-playbooks/roles. This commit fixes that.
Signed-off-by: Sébastien Han <seb@redhat.com>
Before this commit we were forcing ipv4 which might not be available.
Now setting ip_version to ipv4 or ipv6 will give you the right support.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1484189
Signed-off-by: Sébastien Han <seb@redhat.com>
To be properly evaluated the "skipped" conditions must always have the
first place on the list of condition, otherwise the other conditions are
evaluated before and make the task fail.
Closes: https://github.com/ceph/ceph-ansible/issues/1733
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph services can fail to start under certain circumstances (for
example, when running in a container) because the default systemd
service configuration causes namespace issues.
To work around this we can override the system service settings by
placing an overrides file in the ceph-<service>@.service.d directory.
This can be generic so as to allow any potential changes required to
the ceph-<service> service files.
The overrides file is only setup when the
"ceph_<service>_systemd_overrides" config_template override variable is
specified.
The available service systemd override files are as follows:
ceph_mds_systemd_overrides
ceph_mgr_systemd_overrides
ceph_mon_systemd_overrides
ceph_osd_systemd_overrides
ceph_rbd_mirror_systemd_overrides
ceph_rgw_systemd_overrides
The original fix to issue #1755 only set the permissions on
the monitors to which the key was copied, but not the original
monitor where the key was created. Thus, we use a separate task
to set the permission of the key.
The openstack_keys structure now supports a key called mode
whose value is a string that one could pass to chmod to set
the mode of the key file. The ansible file module applies the
mode to all openstack keys with this property.
Fixes: #1755
Move `fsid`,`monitor_name`,`docker_exec_cmd` and `ceph_release` set_fact
to `ceph-defaults` role.
It will allow to reuse these facts without having to play `ceph-common`
or `ceph-docker-common`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will give us more flexibility and avoid a lot of useless when
skipping all tasks from a non-desired role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Merge `ceph-docker-common` and `ceph-common` defaults vars in
`ceph-defaults` role.
Remove redundant variables declaration in `ceph-mon` and `ceph-osd` roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The keys and openstack_keys structure now supports an optional
key called acls whose value is a list of strings one could pass
to setfacl. The ansible ACL module applies the ACLs to all
openstack keys with this property.
Fixes: #1688
Some tasks fetch file to `{{ fetch_directory }}/docker_mon_files` and
then try to copy from `{{ fetch_directory }}/{{ fsid }}`. That causes
the playbook to fail.
Fixes: #1683
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
To keep consistency between `{{ openstack_keys }}` and `{{ keys }}`
respectively in `ceph-mon` and `ceph-client` roles.
This commit also add the possibility to set mds caps.
Fixes: #1680
Co-Authored-by: John Fulton <johfulto@redhat.com>
Co-Authored-by: Giulio Fidente <gfidente@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to ceph/ceph-docker@69d9aa6, this explains how to deploy a
containerized cluster with a custom admin secret.
Basically, just need to pass the `admin_secret` defined in your
`group_vars/all.yml` to the `ceph_mon_docker_extra_env` variable.
Eg:
`ceph_mon_docker_extra_env: -e CLUSTER={{ cluster }} -e FSID={{ fsid }}
-e MON_NAME={{ monitor_name }} -e ADMIN_SECRET={{ admin_secret }}`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new parameter `admin_secret` that allow to deploy a ceph cluster
with a custom admin secret.
Fix: #1630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some variables are missing from ceph-docker-common role since the
include of check_mandatory_vars.yml has been re-added in the ceph-mon
role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The check regarding the networking scenario configuration has been
moved from ceph-common to ceph-mon in 1de8176 but the include was not re-added
in 189f4fe
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Sébastien Han
Jan Provaznik
Guillaume Abrioux
Al Lau
Douglas Fuller
Jason Dillaman
Andy McCrae
John Fulton