remove complexity about current defaults in running cluster
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 29fc115f4a)
This file is a leftover and should have been removed when we dropped the
validate module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8603cba9ab)
This commit ensure all ceph-ansible modules pass flake8 properly.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 268a39ca0e)
In case of deploying new monitor node to an existing cluster,
osd_pool_default_crush_rule should be taken from running monitor because
ceph-osd role won't be run and the new monitor will have different
osd_pool_default_crush_role from other monitors.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit ff9f4d138f)
This commit adds the `osd_auto_discovery` scenario support in the
filestore-to-bluestore playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881523
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8b1eeef18a)
This commit adds connection checks before realm pulls
Curls are performed on the endpoint being pulled from
the mons and the rgws
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1731158
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 902575369c)
Just likve `devices`, this commit adds the support for linux device aliases for
`dedicated_devices` and `bluestore_wal_devices`.
Signed-off-by: Tyler Bishop <tbishop@liquidweb.com>
(cherry picked from commit ee4b8804ae)
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 733596582d)
af9f6684 introduced a regression on the ceph iscsi pool creation
because it was delegated to the first monitor node before that change.
This patch restores the initial worflow.
When the iscsi node doesn't have the admin keyring then the pool
creation fails.
This commit also ensures that the pool creation is only executed once
when having multiple iscsi nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 501b8e0fd3)
Running the `ceph_crush.py`, `ceph_key.py` or `ceph_volume.py` modules in check
mode resulted in the following error:
```
New-style module did not handle its own exit
```
This was due to the fact that they simply returned a `dict` in that case,
instead of calling `module.exit_json()`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 85dd405814)
Since af9f6684 the cephfs pool(s) creation don't use the fs_pools_created
variable anymore because the ceph_pool module is idempotent.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1db4dc807c)
delegate to its own host after checking mon socket to findout if mon socket is in-use or not.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 69f7e35382)
Based on the discussion in issue #5392 I added now this paragraph to this page.
Signed-off-by: Raffael Luthiger <r.luthiger@huanga.com>
(cherry picked from commit 9af86d250b)
This commit makes the following changes:
- Remove trailing whitespace;
- Use consistent header levels;
- Fix code blocks;
- Remove hard tabs;
- Fix ordered lists;
- Fix bare URLs;
- Use markdown list of sections.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 2c244425ec)
Since the state is now optional and default values are handled in the
ceph_pool module itself.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ba3512a8fc)
When using the "absent" state on a non existing pool then the ceph_pool
module will fail and return a python traceback.
Instead we should check if the pool exit or not and execute the pool
deletion according to the result.
The state changed is now set when the pool is actually deleted.
This also disable add_file_common_args because we don't manipulate
files with this module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 047a3e2653)
We don't use ceph_release variable in the ceph.conf jinja template.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 62bd41f0d4)
There's no need ot have a copy of this file in infrastructure-playbooks
directory.
playbooks in that directory can be run from the root dir of
ceph-ansible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f906caa6da)
As of 2.10, group names containing a dash are invalid.
However, setting this option makes it still possible to use a dash in
group names and prevent this warning to show up.
It might need to be definitely addressed in a future ansible release.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1880476
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6938ed1302)
libjemalloc1 package is not required neither for ganesha dependency nor
for the package build process. So this task can be simply dropped.
Signed-off-by: Dmitriy Rabotyagov <noonedeadpunk@ya.ru>
(cherry picked from commit 297532ca41)
We don't need to show this information during the module execution.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a3f4e2b4d1)
There's no need to set this fact with a `set_fact`
We can achieve this in `ceph-defaults`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bcc673f66c)
When using a quote in the registry password then we have the following
error:
The error was: ValueError: No closing quotation
To fix this we need to use the quote filter.
Close: https://bugzilla.redhat.com/show_bug.cgi?id=1880252
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 6dcfdf17d4)
the current condition doesn't work, as soon as the first iteration is
done the condition makes next iterations skip since `rgw_instances` got
set with the first iteration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859872
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ff19c1d851)
The iscsi nodes aren't included in the logrotate condition.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 85643edfe3)
When using a http(s) proxy with either docker or podman we can rely on
the HTTP_PROXY, HTTPS_PROXY and NO_PROXY environment variables.
But with ansible, even if those variables are defined in a source file
then they aren't loaded during the container pull/login tasks.
This implements the http(s) proxy support with docker/podman.
Both implementations are different:
1/ docker doesn't rely en the environment variables with the CLI.
Thos are needed by the docker daemon via systemd.
2/ podman uses the environment variables so we need to add them to
the login/pull tasks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1876692
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bda3581294)
When running the switch2container playbook on a Debian based system
then the systemd unit path isn't the same than Red Hat based system.
Because the systemd unit files aren't removed then the new container
systemd unit isn't take in count.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c1af69a7e7)
We need to skip these tests on client nodes since we don't deploy
node_exporter on them anymore
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5650a6d7d0)
We don't need to install node-exporter on client node because there's
no ceph services running on them.
This also makes sure we use the group name variables in the prometheus
service template instead of hardcoding the values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b105549ed8)
Instead of using run_once: true on each tasks in a block section, we
can use the run_once statement at the block level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2c4af70abd)
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit abb4023d76)
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3a05aeb6cb)
This adds the ceph_dashboard_user ansible module for replacing the
command module usage with the ceph dashboard ac-user-xxx command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ee6f0547ba)
Since [1] we can use the ceph_pool module instead of using the command
module combined with ceph osd pool commands.
[1] bddcb439ce
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8dacbce68f)
We already do this in the site-container.yml playbook because we don't
need docker/podman installed on all client nodes and having the
container image only on the first client node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8ecbdc6ede)
When running the rolling_update playbook with an inventory without
monitor nodes defined (like external scenario) then we can't retrieve
the cluster fsid from the running monitor.
In this scenario we have to pass this information manually (group_vars
or host_vars).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1877426
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f63022dfec)
This changes the grafana container image regitry from docker.io to
quay.io to avoid rate limit.
This also adds the missing container image values for docker2podman
and podman scenarios.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 98c9afceb9)
On DCN environments, or when multiple ceph cluster are configured,
we need to specify the cluster name before running the command or
the rolling_update playbook will fail during minor updates.
Closes: https://bugzilla.redhat.com/1876447
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit cb64df30b6)
In the OSP context, during the rolling update the playbook fails
with the following error:
'''
ERROR! The field 'hosts' has an invalid value, which includes an
undefined variable. The error was: list object has no element 0
'''
This PR just change the hosts field providing a valid mons group
value.
Closes: https://bugzilla.redhat.com/1876803
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit e65f9a5c72)
Guillaume Abrioux
Wong Hoi Sing Edison
Seena Fallah
Ali Maredia
Tyler Bishop
Dimitri Savineau
Benoît Knecht
Raffael
Kefu Chai
Dmitriy Rabotyagov
Francesco Pantano