The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ee50588590)
This commit adds the `osd_auto_discovery` scenario support in the
filestore-to-bluestore playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881523
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8b1eeef18a)
There's no need ot have a copy of this file in infrastructure-playbooks
directory.
playbooks in that directory can be run from the root dir of
ceph-ansible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f906caa6da)
As of 2.10, group names containing a dash are invalid.
However, setting this option makes it still possible to use a dash in
group names and prevent this warning to show up.
It might need to be definitely addressed in a future ansible release.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1880476
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6938ed1302)
When running the switch2container playbook on a Debian based system
then the systemd unit path isn't the same than Red Hat based system.
Because the systemd unit files aren't removed then the new container
systemd unit isn't take in count.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c1af69a7e7)
We already do this in the site-container.yml playbook because we don't
need docker/podman installed on all client nodes and having the
container image only on the first client node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8ecbdc6ede)
This way we keep consistency with purge-container-cluster.yml playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f77fa6e2a4)
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9d2f2108e1)
When running the rolling_update playbook with an inventory without
monitor nodes defined (like external scenario) then we can't retrieve
the cluster fsid from the running monitor.
In this scenario we have to pass this information manually (group_vars
or host_vars).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1877426
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f63022dfec)
On DCN environments, or when multiple ceph cluster are configured,
we need to specify the cluster name before running the command or
the rolling_update playbook will fail during minor updates.
Closes: https://bugzilla.redhat.com/1876447
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit cb64df30b6)
In the OSP context, during the rolling update the playbook fails
with the following error:
'''
ERROR! The field 'hosts' has an invalid value, which includes an
undefined variable. The error was: list object has no element 0
'''
This PR just change the hosts field providing a valid mons group
value.
Closes: https://bugzilla.redhat.com/1876803
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit e65f9a5c72)
When using fqdn in inventory host file, this task will fail because the
mds is registered with its shortname.
It means we must use `mds_to_kill_hostname` in this task.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1869837
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 51c382677d)
ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 448cc280b7)
When running `infrastructure-playbooks/purge-cluster.yml` twice, it fails the
second time on the `ensure rbd devices are unmapped` task, because `rbdmap`
isn't installed anymore at that point.
This commit adds a check that ensures `rbdmap` is available, and skips the
`ensure rbd devices are unmapped` task if it isn't.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit a57fd7a090)
The task "remove old systemd unit file" under "switching from
non-containerized to containerized ceph rgw" only removes
the ceph-radosgw@.service file. The task should also remove
the ceph-radosgw.target file, like the "remove old systemd unit
files" tasks for the mons, mgrs, osds, etc, in order to clean up
all of the unused systemd unit files.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
(cherry picked from commit d19e6033b2)
Otherwise it leaves an empty directory.
When shrinking and redeploying multiple OSDs you have no guarantee it
will reuse the same osd id.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8933bfde33)
This handles missing /etc/ceph/osd, by ensuring we actually found files in
`/etc/ceph/osd` before trying to slurp their content.
This also add a missing `| default(False)` to avoid fowlloing error:
```
fatal: [ceph01]: FAILED! =>
msg: |-
The conditional check 'ceph_osd_data_json[item.2]['encrypted'] | bool' failed. The error was: error while evaluating conditional (ceph_osd_data_json[item.2]['encrypted'] | bool): 'dict object' has no attribute 'encrypted'
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1862416
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit fe8fbd3ee2)
In addition of 155e2a2, the active mds daemons isn't stop/start
correctly as opposed as the other services so that daemon doesn't come
back after the upgrade.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1861688
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ec0a37a74f)
The dashboard upgrade workflow should do the same process than the ceph
upgrade otherwise any systemd unit modification won't be apply on the
monitoring/dashboard stack.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859173
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a6209bd957)
During the daemon upgrade we're
- stopping the service when it's not containerized
- running the daemon role
- start the service when it's not containerized
- restart the service when it's containerized
This implementation has multiple issue.
1/ We don't use the same service workflow when using containers
or baremetal.
2/ The explicity daemon start isn't required since we'are already
doing this in the daemon role.
3/ Any non backward changes in the systemd unit template (for
containerized deployment) won't work due to the restart usage.
This patch refacts the rolling_update playbook by using the same service
stop task for both containerized and baremetal deployment at the start
of the upgrade play.
It removes the explicit service start task because it's already included
in the dedicated role.
The service restart tasks for containerized deployment are also
removed.
This following comment isn't valid because we should have backported
ceph-crash implementation in stable-4.0 before this commit, which was not
possible because of the needed tag v4.0.25.1 (async release for 4.1z1):
~~Finally, this adds the missing service stop task for ceph crash upgrade
workflow.~~
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859173
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 155e2a23d5)
When setting/unsetting osd flags, we can use `tasks_from` when importing
`ceph-facts` role to save some times given that we only need this role
for setting `container_binary`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d66b698be2)
By default, ansible gathers facts from facter and ohai if installed on
the remote nodes, given we don't need them, let's exclude these facts
from our facts gathering
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c95adc564b)
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7dd68b9ac1)
If a failure occurs in ceph-validate, the upgrade playbook keeps running
where we expect it to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8f9cdf4b10)
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 829990e60d)
This commit makes the images pulling skipped if podman isn't installed
on the machine.
In OSP context, the podman installation is done later in the workflow,
it means all `podman pull` commands will fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1849559
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 37b20b6525)
The workflow in this playbook should be the same than in rolling_update,
we should first set noout and nodeep-scrub flags before migrating the
first osd and unset osd flags after the last osd is migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2cfaa056e0)
We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b91d60d384)
The systemd LOAD and ACTIVE fileds could have more than one space between
both values.
This update the systemd regex the same way we're using it in different
part of the code.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843500
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 50140c9b5d)
The dashboard nodes (alertmanager, grafana, node-exporter, and prometheus)
were not manage during the docker to podman migration.
This adds the systemd container template of those services to a dedicated
file (systemd.yml) in order to include it in the docker2podman playbook.
This also adds the dashboard container images pull from docker to podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829389
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 252e78b4e4)
The docker2podman playbook only installs the podman package and updates
the systemd units with the right container_binary value.
We never pull the container image so if one service is restarted then
the container image will be pulled first before the service can start
which could cause longer downstream.
To avoid to download the container image from internet again we can just
pull it from the local docker daemon.
The container_{binding,package,service}_name variables are removed
because they are only used in the ceph-container-engine role which
isn't call in this playbook.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d38f21aeba)
The rbdmirror group name was using the wrong variable definition.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c0a213f928)
The docker commands should be based on the container_binary variable
otherwise running the playbook on a host without docker (like podman
only) will failed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829985
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using skipped variables with from_json filter and python2 then we
need to have a default value otherwise the skipped task will fail.
Unexpected templating type error occurred on
({{ (ceph_volume_lvm_list.stdout | from_json) }}): expected string or
buffer
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790472
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2b9edba131)
We must call `ceph-osd` role from `container_options_facts.yml` because
ceph-osd-run.sh.j2 needs variables set in this file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1819681
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4a4f54f6ee)
Adding `--all` to the `systemctl list-units` command in order to get
*all* osds id on the node (including stoppped osds). Otherwise, it will
purge the cluster but there will be leftover after that.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1814542
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5e7962ccf6)
We don't need to copy the infrastructure playbooks in the root
ceph-ansible directory.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 195944b123)
We only disable the ceph-osd services but not the ceph-volume lvm
services during the filestore to bluestore migration.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 38a683e5bf)
If the filestore configuration was using a dedicated journal with either
a partition or a LV/VG then we need to reuse this for bluestore DB.
When filestore is using a raw devices then we shouldn't destroy
everything (data + journal) but only data otherwise the journal
partition won't exist anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790479
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 535da53d69)
We should add retry/delay to check the presence of the rbdmirror daemon
in the cluster status because the status takes some time to be updated.
Also the metadata.hostname isn't a good key to check because it doesn't
reflect the ansible_hostname fact. We should use metadata.id instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d1316ce77b)
This playbook was using mds systemd condition.
Also a command task was using pipeline which is not allowed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a664159061)
The ceph-facts are running on localhost so if this node is using a
different OS/release that the ceph node we can have a mismatch between
docker/podman container binary.
This commit also reduces the scope of the ceph-facts role because we only
need the container_binary tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 08ac2e3034)
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9d3b49293d)
When running environment with OSDs having ID with more than 2 digits,
some tasks don't match the system units and therefore, playbook can fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1805643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a084a2a347)
We need to call ceph-facts only for setting `container_binary`.
Since this task has been isolated we can use `tasks_from` to only execute the
needed task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 55970b18f1)
Instead of running shring-osd tasks on localhost and delegating most of
them to the first monitor, run all of them on the first monitor
directly.
This has the added advantage of becoming root on the monitor only, not
on localhost.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 8b3df4e418)
Dimitri Savineau
Guillaume Abrioux
Francesco Pantano
Benoît Knecht
Kevin Coakley