This scenario will create OSDs using ceph-volume and is only available
in ceph releases greater than Luminous.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
in containerized deployment, if you try to update your `ceph.conf` file
it won't be actually updated on your nodes because it is overwritten by
the copy of the file which is present in your fetch directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Move `fsid`,`monitor_name`,`docker_exec_cmd` and `ceph_release` set_fact
to `ceph-defaults` role.
It will allow to reuse these facts without having to play `ceph-common`
or `ceph-docker-common`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will give us more flexibility and avoid a lot of useless when
skipping all tasks from a non-desired role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new role `ceph-defaults`.
This role aims to handle all defaults vars for `ceph-docker-common` and
`ceph-common` and set basic facts (eg. `fsid`)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Merge `ceph-docker-common` and `ceph-common` defaults vars in
`ceph-defaults` role.
Remove redundant variables declaration in `ceph-mon` and `ceph-osd` roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't want to have heterogeous ceph.conf anymore and believe that we
should have the right section for the running daemon.
If we don't do this and use profiles, e.g: rgw, we will get a new rgw
section on some of the nodes.
Signed-off-by: Sébastien Han <seb@redhat.com>
It is mandatory now to set the Ceph version you want to install, e.g:
ceph_stable_release: luminous
To find the release names, you can look at the release not doc:
http://docs.ceph.com/docs/master/release-notes/
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
OSDs get started by ceph-disk before the ceph.conf file is written
with a crush location. That results in a crush map without configured
crush location.
To prevent this, we have to restart the OSDs during the initial setup
after the crush location was added to the ceph.conf file.
We have multiple issues with ceph-disk's cli with bluestore and Ceph
releases. This is mainly due to cli changes with Luminous. Luminous
introduced a --bluestore and --filestore options which respectively does
not exist on releases older than Luminous. The default store being
bluestore on Luminous, simply checking for the store is not enough so we
have to build a specific command line for ceph-disk depending on the
Ceph version we are running and the desired osd_store.
Signed-off-by: Sébastien Han <seb@redhat.com>
The keys and openstack_keys structure now supports an optional
key called acls whose value is a list of strings one could pass
to setfacl. The ansible ACL module applies the ACLs to all
openstack keys with this property.
Fixes: #1688
Remove `rgw enable static website` and `rgw enable usage log` from
ceph.conf and make it usable with ceph_config_overrides as profiles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit introduces a new directory called "profiles" which
contains some set of variables for a particular use case. These profiles
provide guidance for certain scenarios such as:
* configuring rgw with keystone v3
Signed-off-by: Sébastien Han <seb@redhat.com>
According to Alfredo, this was used for gitbuilders. Right now shaman/chacra
dev repos are unsigned.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Move condition at task level and not at include level to make `fsid`
variable available for all roles.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some tasks fetch file to `{{ fetch_directory }}/docker_mon_files` and
then try to copy from `{{ fetch_directory }}/{{ fsid }}`. That causes
the playbook to fail.
Fixes: #1683
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
To keep consistency between `{{ openstack_keys }}` and `{{ keys }}`
respectively in `ceph-mon` and `ceph-client` roles.
This commit also add the possibility to set mds caps.
Fixes: #1680
Co-Authored-by: John Fulton <johfulto@redhat.com>
Co-Authored-by: Giulio Fidente <gfidente@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph.conf template needs to look for the value of monitor_interface
in hostvars[host] because there might be different values set per host.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
In Luminous, ceph-disk defaults to bluestore so all our scenarios are
using bluestore, we need to force testing both.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to ceph/ceph-docker@69d9aa6, this explains how to deploy a
containerized cluster with a custom admin secret.
Basically, just need to pass the `admin_secret` defined in your
`group_vars/all.yml` to the `ceph_mon_docker_extra_env` variable.
Eg:
`ceph_mon_docker_extra_env: -e CLUSTER={{ cluster }} -e FSID={{ fsid }}
-e MON_NAME={{ monitor_name }} -e ADMIN_SECRET={{ admin_secret }}`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fail with a sane message if the devices or raw_journal_devices variables
are strings instead of lists during manual device assignment.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
rsync is required by the ansible synchronize package. Ensure
it is installed when local installation is selected.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
Add a new parameter `admin_secret` that allow to deploy a ceph cluster
with a custom admin secret.
Fix: #1630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits refactors how we deploy bluestore. We have existing
scenarios that we don't want to change too much. This commits eases the
user experience by now changing the way you use scenarios. Bluestore is
just a different interface to store objects but the scenarios more or
less remain the same.
If you set osd_objectstore == 'bluestore' along with
journal_collocation: true, you will get an OSD running bluestore with DB
and WAL partitions on the same device.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true, you will get an OSD running bluestore with a
dedicated drive for the rocksdb DB, then the remaining
drives (used with 'devices') will have WAL and DATA collocated.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true and declare bluestore_wal_devices you will get
an OSD running bluestore with a dedicated drive for rocksdb db, a
dedicated drive partition for rocksdb WAL and a dedicated drive for
DATA.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need for 2 variables to enable bluestore, prior to this
patch one had to do the following to activate bluestore:
osd_objectstore: bluestore
bluestore: true
Now you just need to set `osd_objectstore: bluestore`.
Fixes: https://github.com/ceph/ceph-ansible/issues/1475
Signed-off-by: Sébastien Han <seb@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some variables are missing from ceph-docker-common role since the
include of check_mandatory_vars.yml has been re-added in the ceph-mon
role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The check regarding the networking scenario configuration has been
moved from ceph-common to ceph-mon in 1de8176 but the include was not re-added
in 189f4fe
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
e8187f6 does not fix the ipv6 as expected since `ansible_default_*` are
filled with the IP address carried by the network interface used by the
default gateway route. By the way, it assumes that the MON_IP address will
be this IP address which is not always the case.
We need to keep using the previous fact but add some intelligence in the
template to determine how to retrieve the ipv4|ipv6 address since the path
to the fact in `hostvars` is not the same according to ipv4 vs ipv6 case.
Fix: 1569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add an extra variable to the openstack pools, which creates them with
defined rules. This will allow to place different pools on e.g.
different type of disks.
This commit will also set a new default rule when defined and move
the rbd pool to the new rule.
Somehow the shell module will return an error if the command line is not
next to it.
Plus fixed the import with the right path.
Signed-off-by: Sébastien Han <seb@redhat.com>
Followup on https://github.com/ceph/ceph-ansible/pull/1469 where we
merged most of the container code from roles/ceph-*/task/docker/*.yml
into roles/ceph-docker-common/tasks/
It seems that we forgot to remove the original files.
Signed-off-by: Sébastien Han <seb@redhat.com>
The new test in the checks PGs are no longer working on distributions
where /bin/sh isn't linked to /bin/bash.
Fix: #1619
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
OpenStack's Gnocchi service expects to have a pool called "metrics".
This change addess "metrics" to the list of `openstack_pools` and
creates a corresponding key. It is only run if the user sets
`openstack_config: false`.
The current handler only restarts one OSD on each OSD server. After
the first one the handler stops, not matter what results the checks had.
Co-Authored-By: Gaudenz Steinlin (@gaudenz)
Remove "osd mkfs type" and the other pre-Bluestore parameters from the
generated ceph.conf so that disk activation on OSDs will work. The
current default xfs config results in a failed deployment and
incorrect partition metadata.
For newly created cluster the command: ceph --cluster {{ cluster }} osd
pool get rbd size does not respond properly.
We only want to check if the rbd pool exists, so we know use an ls |
grep approach.
Closes: https://github.com/ceph/ceph-ansible/issues/1547
Signed-off-by: Sébastien Han <seb@redhat.com>
Rewrite the check_pgs by using json parsing instead of complex regexp to
parse the `ceph -s` output.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a default value for `ceph_docker_on_openstack` to avoid a
conditional check error for the task `pause after docker install before starting` in
`roles/ceph-docker-common/tasks/pre_requisites/prerequisites.yml`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The fact ['ansible_$interface']['ipv4'] is a dictionary where
['ansible_$interface']['ipv6'] is a list. If we use
ansible_default_ipv6|ipv4 is is always a dictionary which allows us to
get the ipv6 and ipv4 address without adding more complexity to the
template.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
For some reason we changed the check of pgs but it appears it could be
dangerous because the current check might satisfied as long as 1 PG is
active+clean.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `-e CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE` is already hardcoded in
`eph-osd-run.sh.j2` there is no need to add `-e
CEPH_DAEMON=OSD_CEPH_DISK_ACTIVATE` as a default value in defaults vars.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We only check for everything expect 'distro' because that
is a valid way of deploying RHCS, with preprepared repos
present on the nodes.
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: we could end up in situation where we would install a package
on a machine that does not have the right repo enabled. Because the
condition was set to OR we weren't pinning a particular host but just a
condition. Let's say someone sets 'ceph_origin == "distro"', this would
try to install OSD packages on Monitors.
Solution: use a AND condition to first pin to the group_name (which
identifies a set of hosts) AND then after this one of the installation
condition.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453119
Co-Authored-By: https://github.com/zhsj
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: fail to deploy a containerized Ceph cluster with ipv6
Solution: do not hardcode ipv4 when bootstrapping the container.
Now use ip_version: ipv6 to get a containerized cluster deployed with
ipv6.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1451786
Signed-off-by: Sébastien Han <seb@redhat.com>
Andrew Schoen
Sébastien Han
Andrew Schoen
Guillaume Abrioux
Christian Zunker
John Fulton
Alfredo Deza
Patrick Donnelly
yanyx
Douglas Fuller
Florian Haas
Peter Jenkins
Austin Workman