We should use `latest-master-devel` for switch_to_containers job.
Otherwise it might happen we actually downgrade the ceph version when
the image used is older than the rpm initially used for installing ceph.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise it might try to use the system installed version of ansible
when there's one available.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The add-mgrs scenario is still using the testinfra command instead of
pytest so the tests exectution are failling.
ERROR: InvocationError for command could not find executable testinfra
This also adds the missing --ssh-config option to testinfra.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commits removes these two symlinks.
They were there for backward compatibility and were marked deprecated as
of stable-4.0
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The shrink scenarios don't need the docker variables (except for OSD).
Removing pytest for shrink-mgr.
Adding environment variables for xxx_to_kill ansible variable.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit replaces the playbook used for add_osds job given
accordingly to the add-osd.yml playbook removal
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds a playbook to be played before we run purge playbook,
it first creates an rbd image then map an rbd device on client0 so the
purge playbook will try to unmap it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It doesn't make sense to test the old 3.0.x container images with
nautilus+ ceph releases.
Also disable the dashboard deployment and switch to bluestore backend.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The secondary vagrant variables didn't have the grafana vm variable
set which create an vagrant error.
There was an error loading a Vagrantfile. The file being loaded
and the error message are shown below. This is usually caused by
an invalid or undefined variable.
This patch also changes the ssh-extra-args parameter to ssh-common-args
to get the same values for ssh/sftp/scp. Otherwise we can see warnings
from ansible and some tasks are failing.
[WARNING]: sftp transfer mechanism failed on [mon0]. Use ANSIBLE_DEBUG=1
to see detailed information
It also updates the ssh-common-args value for the rgw-multisite scenario
to reflect the ANSIBLE_SSH_ARGS environment variable value.
Finally changing the IP addresses due to the Vagrant refact done in the
commit 778c51a
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
The ANSIBLE_CONFIG value wasn't set correctly for two scenarios. This
environment variable doesn't use '-F'.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
test switch_to_containers job against the latest ceph@master
ceph-container image tag available.
In order to be sure the ceph release deployed in the first step (non
containerized deployment) isn't newer than the tag used for the
containerized migration (which would mean we try to downgrade the
version).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and RGW and then runs shrink-rgw.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
this setting is not needed here since we explicitely set it for
container and non container context.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a new functional test that deploys Ceph cluster with three nodes for
MON, OSD and RBD Mirror and, then, runs shrink-rbdmirror.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MGR and then runs shrink-mgr.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a new functional test that deploys a Ceph cluster with three nodes
for MON, OSD and MDS and then runs shrink-mds.yml to test it.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
adding back a sleep 30s after nodes have rebooted before running
testinfra.
This was removed accidentally by d5be83e
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Because we're using vagrant, a ssh config file will be created for
each nodes with options like user, host, port, identity, etc...
But via tox we're override ANSIBLE_SSH_ARGS to use this file. This
remove the default value set in ansible.cfg.
Also adding PreferredAuthentications=publickey because CentOS/RHEL
servers are configured with GSSAPIAuthenticationis enabled for ssh
server forcing the client to make a PTR DNS query.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds `pytest-rerunfailures` in requirements.txt so we can
retry failing test in testinfra to avoid false positive. (eg: sometimes it
can happen for some reason a service takes too much time to start)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In order to support ansible 2.8 with testinfra we need to use the
latest release (3.0.x).
Adding ssh-config option to py.test.
Also bumping the pytest and xdist version.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since a1a871c we don't need to copy the infrastructure playbooks
under the ceph-ansible root directory.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The current lvm_osds only tests filestore on one OSD node.
We also have bs_lvm_osds to test bluestore and encryption.
Let's use only one scenario to test filestore/bluestore and with or
without dmcrypt on four OSD nodes.
Also use validate_dmcrypt_bool_value instead of types.boolean on
dmcrypt validation via notario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Add a playbook that deploys manager on a new node and adds that node to
the already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a tox scenario that adds a new RGW node as a part of already
deployed Ceph cluster and deploys RGW there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a tox scenario that adds a new RBD mirror node as a part of already
deployed Ceph cluster and deploys RBD mirror there.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
update scenario is now handled by tox-update.ini file so we shoudn't
have update reference in tox.ini file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This test deploys a luminous cluster with ceph-disk created osds
and then upgrades to nautilus and migrates those osds to ceph-volume.
The nodes are then rebooted and cluster state verified.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Add a playbook that deploys a new monitor on a new node, adds that node
to the Ceph cluster and the monitor to the quorum and updates the ceph
configuration file on OSD nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
It's usefull to have logs in debug mode enabled in order to have
more information for developpers.
Also reindent to json file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
even on master, force the release to be nautilus.
this scenarios is failing because at multiple times this scenario is
actually downgrading the ceph version.
It might happen that the latest-master image is older than what was
deployed in the first step of the scenario (the RPM deployment).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 41b0fa15ddf2a45402d17faa3bd1e817692fc1d2)
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
there's no need to test this on all scenarios.
testing idempotency on all_daemons should be enough and allow us to save
precious resources for the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
update scenario has been moved to a dedicated tox ini file.
We shouldn't have any references to this scenario in the main tox ini
file.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized CI jobs the playbook executed is purge-cluster.yml
but it should be set to purge-docker-cluster.yml
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Harald Jensås
Igor
Rishabh Dave
Andrew Schoen