when running docker-to-podman playbook, there's no need to call
`ceph-config` and `ceph-rgw` from the role `ceph-handler`.
It can even have side effects when coming from a baremetal cluster that
was previously migrated using the switch-to-containers playbook. Indeed
it might complain about missing .target systemd unit since they are
removed during that migration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70f19be367)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
since `ceph-rgw` may be called from `ceph-handler` in some contexts we
should avoid rerunning it unnecessarily.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating rgw with either a mon, mgr or osd, switching from
single site to a multisite rgw setup failed because of the handlers
triggered between the ansible play of the collocated daemon and the play
of the rgw. Since the multisite changes are not yet applied the handlers
fail.
The idea here is to ensure we run the multisite configuration from the
ceph-handler role before the restart happens, this way it won't complain
because of non existing multisite configuration.
(Note: this is also valid when simply changing a multisite configuration)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1888630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The mds_name fact always gets the ansible_hostname value so we don't
need to have a dedicated fact for this and use the ansible_hostname fact
instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The iscsigws restart scripts for tcmu-runner and rbd-target-{api,gw}
services only call the systemctl restart command.
We don't really need to copy a shell script to do it when we can use
the ansible service module instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Make a tempfile directory and copy the restart scripts there (and then
execute them from there), rather than using insecure known filenames
in /tmp/
This is a partial fix for ceph/ceph-ansible#2937
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
When running environment with OSDs having ID with more than 2 digits,
some tasks don't match the system units and therefore, playbook can fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1805643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Given that we delegate to the first monitor, we must read the value of
`container_exec_cmd` from this node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When unsetting the noup flag, we must call container_exec_cmd from the
delegated node (first mon member)
Also, adding a `run_once: true` because this task needs to be run only 1
time.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
411bd07d54 introduced a bug in handlers
using `handler_*_status` instead of `hostvars[item]['handler_*_status']`
causes handlers to be triggered in anycase even though
`handler_*_status` was set to `False` on a specific node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed to avoid following error:
```
ERROR! The requested handler 'restart ceph mons' was not found in either the main handlers list nor in the listening handlers list
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1777829
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If for some reason, there's an old rgw socket file present in the
/var/run/ceph/ directory then the test command could fail with
test: xxxxxxxxx.asok: binary operator expected
$ ls -hl /var/run/ceph/
total 0
srwxr-xr-x. ceph-client.rgw.rgw0.rgw0.68.94153614631472.asok
srwxr-xr-x. ceph-client.rgw.rgw0.rgw0.68.94240997655088.asok
We can check the radosgw socket in /proc/net/unix to avoid using wildcard
in the socket name.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We are using multiple listen topics with the handlers. That means that
we are notifying 4 tasks for each handler.
Instead we can group the listen on an include_tasks and based on the
group condition.
Before:
NOTIFIED HANDLER ceph-handler : set _mon_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mon restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mon daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mon_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _osd_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy osd restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph osds daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _osd_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _mds_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mds restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mds daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mds_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _rgw_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy rgw restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph rgw daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _rgw_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _mgr_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mgr restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mgr daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mgr_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _rbdmirror_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy rbd mirror restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph rbd mirror daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _rbdmirror_handler_called after restart for mon0
After:
NOTIFIED HANDLER ceph-handler : mons handler for mon0
NOTIFIED HANDLER ceph-handler : osds handler for mon0
NOTIFIED HANDLER ceph-handler : mdss handler for mon0
NOTIFIED HANDLER ceph-handler : rgws handler for mon0
NOTIFIED HANDLER ceph-handler : mgrs handler for mon0
NOTIFIED HANDLER ceph-handler : rbdmirrors handler for mon0
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit merges the two restart tasks into a single one, this way
it's one task less to notify.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using the ansible --limit option on one or few OSD nodes and if the
handler is triggered then we will restart the OSD service on all OSDs
nodes instead of the hosts limited by the limit value.
Even if the play is limited by the --limit value we are using all OSD
nodes from the OSD group.
with_items: '{{ groups[osd_group_name] }}'
Instead we should iterate only on the nodes present in both OSD group and
limit list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In containerized deployment, the restart OSD handler couldn't be
triggered in most ansible execution.
This is due to the usage of run_once + a condition on the inventory
hostname and the last filter.
The run_once is triggered first so ansible will pick a node in the
osd group to execute the restart task. But if this node isn't the
last one in the osd group then the task is ignored. There's more
probability that the task will be ignored than executed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Ganesha cannot be operated active/active, in those deployments
where it is managed by pacemaker the container name can be
different than the default.
This change uses "ceph_nfs_service_suffix" where previously
missing to ensure tasks will work with customized names.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1750005
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
fbf4ed42ae introduced a bug when
container binary is podman.
podman doesn't support ps -f using regular expression, the container id
is never set in the restart script causing the handler to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1721536
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since everything is already in a block with the same condition, it's not
needed to leave all of them on these tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
c90f605b5 introduces the default ceph cluster name value in the rgw
socket path for the rgw restart script. But this should use the
`cluster` variable instead.
This commit also fixes this in the osd restart script.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since Mimic the radosgw socket has two extra fields in the socket
name (before the .asok suffix): <pid>.<ctid>
Before:
/var/run/ceph/ceph-client.rgw.cephaio-1.asok
After:
/var/run/ceph/ceph-client.rgw.cephaio-1.16913.23928832.asok
The radosgw restart script doesn't handle this and could fail during
an upgrade.
If the SOCKETS variable isn't defined in the script then the test
command won't fail because the return code is 0
$ test -S
$ echo $?
0
There multiple issues in that script:
- The default SOCKETS value isn't defined due to a typo
SOCKET vs SOCKETS.
- Because the socket name uses the pid then we need to check the
socket name after the service restart.
- After restarting the radosgw service we need to wait few seconds
otherwise the socket won't be created.
- Update the wget parameters because the command is doing a loop.
We now use the same option than curl.
- The check_rest function doesn't test the radosgw at all due to
a wrong test command (test against a string) and always returns 0.
This needs to use the DOCKER_EXECS variable in order to execute the
command.
$ test 'wget http://192.168.100.11:8080'
$ echo $?
0
Also remove the test based on the ansible_fqdn because we only use
the ansible_hostname + rgw instance name.
Finally group all for loop into a single one.
Resolves: #3926
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is necessary when configuring RGW with SSL because
in addition to passing specific frontend options, civetweb
appends the 's' character to the binding port and beast uses
ssl_endpoint instead of endpoint.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1722071
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
There's two big issues with the current OSD restart script.
1/ We try to test if the ceph osd daemon socket exists but we use a
wildcard for the socket name : /var/run/ceph/*.asok.
This fails because we usually have multiple ceph osd sockets (or
other ceph daemon collocated) present in /var/run/ceph directory.
Currently the test fails with:
bash: line xxx: [: too many arguments
But it doesn't stop the script execution.
Instead we can specify the full ceph osd socket name because we
already know the OSD id.
2/ The container filter pattern is wrong and could matches multiple
containers resulting the script to fail.
We use the filter with two different patterns. One is with the device
name (sda, sdb, ..) and the other one is with the OSD id (ceph-osd-0,
ceph-osd-15, ..).
In both case we could match more than needed.
$ docker container ls
CONTAINER ID IMAGE NAMES
958121a7cc7d ceph-daemon:latest ceph-osd-strg0-sda
589a982d43b5 ceph-daemon:latest ceph-osd-strg0-sdb
46c7240d71f3 ceph-daemon:latest ceph-osd-strg0-sdaa
877985ec3aca ceph-daemon:latest ceph-osd-strg0-sdab
$ docker container ls -q -f "name=sda"
958121a7cc7d
46c7240d71f3
877985ec3aca
$ docker container ls
CONTAINER ID IMAGE NAMES
2db399b3ee85 ceph-daemon:latest ceph-osd-5
099dc13f08f1 ceph-daemon:latest ceph-osd-13
5d0c2fe8f121 ceph-daemon:latest ceph-osd-17
d6c7b89db1d1 ceph-daemon:latest ceph-osd-1
$ docker container ls -q -f "name=ceph-osd-1"
099dc13f08f1
5d0c2fe8f121
d6c7b89db1d1
Adding an extra '$' character at the end of the pattern solves the
problem.
Finally removing the get_container_osd_id function because it's not
used in the script at all.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We're using fuser command to see if a process is using a ceph unix
socket file. But the fuser command runs through every PID present in
/proc/<PID> to see if one of them is using the file.
On a system running thousands processes, the fuser command can take
a long time to finish.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717011
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
This commit aligns the way the different containers are managed with how
it's currently done with the other ceph daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
rolling_update playbook already takes care of stopping/starting services
during the sequence. There's no need to trigger potential unwanted
services restart.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The restart_osd_daemon.sh generated from the j2 template
contains a python call which uses 'print x' instead of
'print(x)'. Add the missing parentheses to make this call
compatible with both 2 and 3.
Also add parentheses to other python print calls found
in roles/ceph-client/defaults/main.yml and
infrastructure-playbooks/cluster-os-migration.yml.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1671721
Signed-off-by: John Fulton <fulton@redhat.com>
Guillaume Abrioux
Alex Schultz
Dimitri Savineau
Matthew Vernon
Giulio Fidente
L3D
Boris Ranto
Rishabh Dave
John Fulton