`+` is more idiomatic for "one or more" in a regex than `{1,}`; the
latter was introduced in a previous fix for an incorrect `{1,2}`
restriction.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
After restarting each OSD, restart_osd_daemon.sh checks that the
cluster is in a good state before moving on to the next one. One of
the checks it does is that the number of pgs in the state
"active+clean" is equal to the total number of pgs in the cluster.
On large clusters (e.g. we have 173,696 pgs), it is likely that at
least one pg will be scrubbing and/or deep-scrubbing at any one
time. These pgs are in state "active+clean+scrubbing" or
"active+clean+scrubbing+deep", so the script was erroneously not
including them in the "good" count. Similar concerns apply to
"active+clean+snaptrim" and "active+clean+snaptrim_wait".
Fix this by considering as good any pg whose state contains
active+clean. Do this as an integer comparison to num_pgs in pgmap.
(could this be backported to at least stable-3.0 please?)
Closes: #2008
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Previously RETRIES was set (by default to 40) once at the start of the
script; this meant that it would only ever wait for up to 40 lots of
30s across *all* the OSDs on a host before bombing out. In fact, we
want to be prepared to wait for the same amount of time after each OSD
restart for the clusters' pgs to be happy again before continuing.
Closes: #3154
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
For now our best guess is to count the number of devices and multiply
by osds_per_device. Ideally we'd like to run ceph-volume lvm batch
--report and get the number of OSDs that way, but currently we need
a ceph.conf in place already before we can do that. There is a tracker
ticket that would allow os to get around the need for a ceph.conf:
http://tracker.ceph.com/issues/36088
Fixes: https://github.com/ceph/ceph-ansible/issues/3135
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the default value for _rgw_hostname was took from the current node being
played while it should be took from the respective node in the loop.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This avoids errors when the osd scenario choosen does not require
setting devices or lvm_volumes. The default values for these are not
set because they exist in the ceph-osd role, not ceph-defaults.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
The commit:
commit 1164cdc002
Author: Guillaume Abrioux <gabrioux@redhat.com>
Date: Thu Aug 2 11:58:47 2018 +0200
iscsigw: install ceph-iscsi-cli package
installs the cli package but does not start and enable the
rbd-target-api daemon needed for gwcli to communicate with the igw
nodes. This patch just enables and starts it for the non-container
setup. The container setup is already doing this.
This fixes bz https://bugzilla.redhat.com/show_bug.cgi?id=1613963
Signed-off-by: Mike Christie <mchristi@redhat.com>
As of rhel 7.6, it has been decided it doesn't make sense to confine
`ganesha_t` anymore. It means this domain won't exist anymore.
Let's add a `failed_when: false` in order to make the deployment not
failing when trying to run this command.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1626070
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If this is set to anything other than the default value of 1 then the
--osds-per-device flag will be used by the batch command to define how
many osds will be created per device.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This command line is not supported.
According to official documentation:
```
Note that shell command lines are not directly supported.
If shell command lines are to be used,
they need to be passed explicitly to a shell implementation of some kind.
```
We must run this using /bin/sh instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
let's add ansible_hostname as a default value for rgw_hostname if no
hostname in servicemap matches ansible_fqdn.
Fixes: #3063
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622505
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit is adding quotes that make keyring unusuable
eg:
```
client.john
key: AQAN0RdbAAAAABAAH5D3WgMN9Rxw3M8jkpMIfg==
caps: [mds] ''
caps: [mgr] 'allow *'
caps: [mon] 'allow rw'
caps: [osd] 'allow rw'
```
Trying to import such a keyring and use it will result:
```
Error EACCES: access denied
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1623417
This reverts commit 424815501a.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When ceph-nfs is deployed containerized and ceph-common is not
installed on the host the start_nfs task fails because the rados
command is missing on the host.
Run rados commands from a ceph container instead so that
they will succeed.
Signed-off-by: Tom Barron <tpb@dyncloud.net>
If the ceph-radosgw target is not enabled, then enabling the
ceph-radosgw@ service has no effect since nothing will pull
it on the next reboot. As such, we need to ensure that the
target is enabled.
Signed-off-by: Markos Chandras <mchandras@suse.de>
The dummy client container currently wont work on non-x86_64 hosts.
This PR creates a filtered client group that contains only hosts
that are x86_64 - which can then be the group to run the
dummy container against.
This is for the specific case of a containerized_deployment where
there is a mixture of non-x86_64 hosts and x86_64 hosts. As such
the filtered group will contain all hosts when running with
containerized_deployment: false.
Currently ppc64le is not supported for Ceph server components.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
A couple if things were wrong in the initial commit:
* ceph_release_num[ceph_release] >= ceph_release_num['luminous'] will
never work since the ceph_release fact is set in the roles after. So
either ceph-common or ceph-docker-common set it
* we can easily re-use the initial command to check if a cluster is
running, it's more elegant than running it twice.
* set the fact rgw_hostname on rgw nodes only
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1618678
Signed-off-by: Sébastien Han <seb@redhat.com>
The config_template plugin exists in the ceph-common role so that
config_template will still work with ansible galaxy.
This PR syncs the config_template module from the base of the repo in
plugins/actions to the ceph-common role.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
If there are no services on the cluster, then the 'rgw' could be missing
and the task is failing with the following problem:
msg": "The task includes an option with an undefined variable.
The error was: 'dict object' has no attribute 'rgw'
We fix this by checking the existence of the 'rgw' attribute. If it's
missing, we skip the task since the role already contains code to set
a good default rgw_hostname.
Signed-off-by: Markos Chandras <mchandras@suse.de>
Since commit f422efb1d6 ("config: ensure
rgw section has the correct name") we observe the following failures in
new Ceph deployment with OpenStack-Ansible
fatal: [aio1_ceph-rgw_container-fc588f0a]: FAILED! => {"changed": false,
"cmd": "ceph --cluster ceph -s -f json", "msg": "[Errno 2] No such file
or directory"
This is because the task executes 'ceph' but at this point no package
installation has happened. Packages are normally installed in the
'ceph-common' role which runs after the 'ceph-defaults' one.
Since we are looking to obtain cluster information, the task should be
delegated to a monitor node similar to other tasks in that role
Signed-off-by: Markos Chandras <mchandras@suse.de>
Follow up on 36942af698
"disabled_modules" is always a list, it's the items in the list that
can be dicts in mimic. Many ways to fix this, here's one.
Signed-off-by: Dardo D Kleiner <dardokleiner@gmail.com>
This reverts commit e84f11e99e.
This commit was giving a new failure later during the rolling_update
process. Basically, this was modifying the list of devices and started
impacting the ceph-osd itself. The modification to accomodate the
osd_auto_discovery parameter should happen outside of the ceph-osd.
Also we are trying to not play ceph-osd role during the rolling_update
process so we can speed up the upgrade.
Signed-off-by: Sébastien Han <seb@redhat.com>
fqdn configuration possibility caused a lot of trouble, it's adding a
lot of complexity because of multiple cases and the relation between
ceph-ansible and ceph-container. Moreover, there is no benefit for such
a feature.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the ceph.conf.j2 always assumes the hostname used to register the
radosgw in the servicemap is equivalent to `{{ ansible_hostname }}`
which returns the shortname form.
We need to detect which form of the hostname was used in case of already
deployed cluster and update the ceph.conf accordingly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1580408
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
there is no need to have all these conditions.
for instance, assuming `mds_group_name` is set to 'mdss':
- `if groups[mds_group_name] is defined` checks if `'mdss'` is present in `{{ groups }}`
- `if {{ mds_group_name }} in group_names` checks if the current node is part
the group `'mdss'`
- `if inventory_hostname in groups.get(mds_group_name, [])` checks if
the current node is part of the group 'mdss'
The third condition is enough to cover the need of ensuring we are
running on a mds node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If calamari is already installed and ceph has been upgraded to a higher
version the initialisation will fail later. So if we detect the
calamari-server is too old compare to ceph_rhcs_version we try to update
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1601755
Signed-off-by: Sébastien Han <seb@redhat.com>
rolling_update relies on the list of devices when performing the restart
of the OSDs. The task that is builind the devices list out of the
ansible_devices dict only runs when there are no partitions on the
drives. However during an upgrade the OSD are already configured, they
have been prepared and have partitions so this task won't run and thus
the devices list will be empty, skipping the restart during
rolling_update. We now run the same task under different requirements
when rolling_update is true and build a list when:
* osd_auto_discovery is true
* rolling_update is true
* ansible_devices exists
* no dm/lv are part of the discovery
* the device is not removable
* the device has more than 1 sector
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613626
Signed-off-by: Sébastien Han <seb@redhat.com>
This is used with the lvm osd scenario. When using devices you need the
option to set the crush device class for all of the OSDs that are
created from those devices.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This adds the action 'batch' to the ceph-volume module so that we can
run the new 'ceph-volume lvm batch' subcommand. A functional test is
also included.
If devices is defind and osd_scenario is lvm then the 'ceph-volume lvm
batch' command will be used to create the OSDs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
The include does not need a condition on containerized_deployment since
we are already in an include than has the same condition.
Signed-off-by: Sébastien Han <seb@redhat.com>
In environments where we wish to have manual/greater control over
how the bootstrap keyrings are used, we need to able to externally
define what the mgr keyring secret will be and have ceph-ansible
use it, instead of it being autogenerated
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610213
Signed-off-by: Graeme Gillies <ggillies@akamai.com>
deployment.
restart_osd_daemon.sh is used to discover and restart all OSDs on a
host. To do it the scripts loops the list of ceph-osd@ services in the
system. This commit fixes bug in the regular expression responsile for
extraction of OSDs - prior version uses `[0-9]{1,2}` expression
which is ignoring all OSDS which numbers are greater than 99 (thus
longer than 2 digits). Fix removed upper limit of digits in the number.
This problem existed in two places in the script.
Closes: #2964
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
This commit ensures we are backward compatible with fqdn deployments.
Since ceph-container enforces deployment to be done with shortname, we
must keep backward compatibility with clusters already deployed with
fqdn configuration
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This was introduced by
59ee2e8d3b
and made our socket checks impossible to run. The PID could be found,
but the cctid cannot.
This happens during upgrade to mimic and on cluster running on mimic.
So let's force the admin socket the way it was so we can properly check
for existing instances also the line $cluster-$name.$pid.$cctid.asok
is only needed when running multiple instances of the same daemon,
thing ceph-ansible cannot do at the time of writing
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610220
Signed-off-by: Sébastien Han <seb@redhat.com>
Instead of failing the entire purge operation when the rbd command fails
just log an error. This will allow the higher level target and config
cleanup to complete, and the user only has to manually delete the rbd
images.
Signed-off-by: Mike Christie <mchristi@redhat.com>
We were not passing in the ceph conf info into the rbd image removal
command, so if the clustername was not the default igw purge would fail
due to the rbd rm command failing.
This just fixes the bug by passing in the ceph conf info which has the
clustername to use.
This fixes Red Hat bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1601949
Signed-off-by: Mike Christie <mchristi@redhat.com>
The container runs with --rm which means it will be deleted by Docker
when exiting. Also 'docker rm -f' is not idempotent and returns 1 if the
container does not exist.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1609007
Signed-off-by: Sébastien Han <seb@redhat.com>
rbd-mirror can't start when deploying jewel because it needs admin
keyring.
Getting back this task brings backward compatibility for jewel
deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we want to be backward compatible with release prior to luminous, we
have to set the rule name accordingly to default values used in jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This task would be run on both containerized *and* non containerized
deployment.
Let's have a proper title to avoid confusion.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In containerized deployments we now inherite from the
radosgw_civetweb_options options when bootstrapping the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
Giulio Fidente
Matthew Vernon
Andrew Schoen
Guillaume Abrioux
Neha Ojha
Mike Christie
Tom Barron
Markos Chandras
Andy McCrae
Sébastien Han
Dardo D Kleiner
Graeme Gillies
Artur Fijalkowski