change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
ee2d52d33d missed this sync between
ceph-defaults/defaults/main.yml and group_vars/all.yml.sampl
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently a throw-away container is built to run ceph client
commands to setup users, pools & auth keys. This utilises
the same base ceph container which has all the ceph services
inside it.
This PR allows the use of a separate container if the deployer
wishes - but defaults to use the same full ceph container.
This can be used for different architectures or distributions,
which may support the the Ceph client, but not Ceph server,
and allows the deployer to build and specify a separate client
container if need be.
Signed-off-by: Andy McCrae <andy.mccrae@gmail.com>
Liberty is no longer available in the UCA. The last available release there
is currently Queens.
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
Check firewall isn't working as expected and might break deployments.
This part of the code will be reworked soon.
Let's focus on configure_firewall code for now.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1541840
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Allow user to choose between timesyncd, chronyd and ntpd
Installation will default to timesyncd since it is distributed as
part of the systemd installation for most distros.
Added note indicating NTP daemon type is not used for containerized
deployments.
Fixes issue #3086 on Github
Signed-off-by: Benjamin Cherian <benjamin_cherian@amat.com>
As per #1013 it appears that BS will soon use THP to lower TLB misses,
also disabling THP hasn't demonstrated any gains so far.
Closes: https://github.com/ceph/ceph-ansible/issues/1013
Signed-off-by: Sébastien Han <seb@redhat.com>
...with the exception of the purge operation, since
removing Calamari would still be useful for an old
cluster.
Signed-off-by: John Spray <john.spray@redhat.com>
BlueStore's cache is sized conservatively by default, so that it does
not overwhelm under-provisioned servers. The default is 1G for HDD, and
3G for SSD.
To replace the page cache, as much memory as possible should be given to
BlueStore. This is required for good performance. Since ceph-ansible
knows how much memory a host has, it can set
`bluestore cache size = max(total host memory / num OSDs on this host * safety
factor, 1G)`
Due to fragmentation and other memory use not included in bluestore's
cache, a safety factor of 0.5 for dedicated nodes and 0.2 for
hyperconverged nodes is recommended.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1595003
Signed-off-by: Neha Ojha <nojha@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
If this is set to anything other than the default value of 1 then the
--osds-per-device flag will be used by the batch command to define how
many osds will be created per device.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
fqdn configuration possibility caused a lot of trouble, it's adding a
lot of complexity because of multiple cases and the relation between
ceph-ansible and ceph-container. Moreover, there is no benefit for such
a feature.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1613155
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.
Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
In environments where we wish to have manual/greater control over
how the bootstrap keyrings are used, we need to able to externally
define what the mgr keyring secret will be and have ceph-ansible
use it, instead of it being autogenerated
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610213
Signed-off-by: Graeme Gillies <ggillies@akamai.com>
Since `V2.6-stable` is available and has packages for `mimic`, let's
update this default value accordingly so nfs nodes can be deployed with
mimic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of Kraken, the journal code does not use the hdparm command anymore
so we can remove it from our package dependency list.
Fixes: https://github.com/ceph/ceph-ansible/issues/1402
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit f6910efa24389c264062963b2054c7cd29ffebb3)
We now add a default 'rbd' application type to each pool we create. This
will remove the warning: " application not enabled on N pool(s) "
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1590275
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
As discussed with the cores, the current limits are too low and should
be bumped to higher value.
So now by default monitors get 3GB and OSDs get 5GB.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1591876
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch if you were running on a Red Hat system,
ceph-ansible would try to configure firewalld for you without the
operators's consent.
Now you can enable or disable the fw configuration by setting
configure_firewall to either true or false.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1589146
Signed-off-by: Sébastien Han <seb@redhat.com>
For ceph-iscsi-gw and ceph-rbd-mirror roles the group_name are named
differently (by default) than the role name so we have to change the
script to generate the correct name.
Signed-off-by: Sébastien Han <seb@redhat.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have the ability to deploy a containerized version of ceph-iscsi.
The result is similar to the non-containerized version, you simply have
3 containers running for the following services:
* rbd-target-api
* rbd-target-gw
* tcmu-runner
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1508144
Signed-off-by: Sébastien Han <seb@redhat.com>
Functional tests are broken when testing against 'dev' release (ceph).
Adding a dummy value here will make it possible to run ceph-ansible CI
against dev ceph release.
Typical error:
```
> if request.node.get_marker("from_luminous") and ceph_release_num[ceph_stable_release] < ceph_release_num['luminous']:
E KeyError: 'dev'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1487d93f21b609a637053f5b33cd2a4e408d00)
Guillaume Abrioux
Sébastien Han
Neha Ojha
Noah Watkins
Mike Christie
Ali Maredia
Rishabh Dave
Andy McCrae
Christian Berendt
Andrew Schoen
Benjamin Cherian
John Spray
Graeme Gillies
George Shuklin
Ha Phan
Michel Rode