The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This playbook isn't needed anymore, we can achieve this operation by
running main playbook with `--limit` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the ceph_fs ansible module for replacing the command module
usage with the ceph fs command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds the `osd_auto_discovery` scenario support in the
filestore-to-bluestore playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881523
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
This change default value of grafana-server group name.
Adding some tasks in ceph-defaults in order to keep backward
compatibility.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Otherwise this will generate an ansible warning about the missing
filter.
[DEPRECATION WARNING]: evaluating xxx as a bare variable, this behaviour
will go away and you might need to add |bool to the expression in the
future.
Also see CONDITIONAL_BARE_VARS configuration toggle.. This feature will
be removed in version 2.12.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In Pacific we're are sure that users already achieved the msgr2 because
that was introduced in Nautilus.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There's no need ot have a copy of this file in infrastructure-playbooks
directory.
playbooks in that directory can be run from the root dir of
ceph-ansible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of 2.10, group names containing a dash are invalid.
However, setting this option makes it still possible to use a dash in
group names and prevent this warning to show up.
It might need to be definitely addressed in a future ansible release.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1880476
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When running the switch2container playbook on a Debian based system
then the systemd unit path isn't the same than Red Hat based system.
Because the systemd unit files aren't removed then the new container
systemd unit isn't take in count.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already do this in the site-container.yml playbook because we don't
need docker/podman installed on all client nodes and having the
container image only on the first client node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running the rolling_update playbook with an inventory without
monitor nodes defined (like external scenario) then we can't retrieve
the cluster fsid from the running monitor.
In this scenario we have to pass this information manually (group_vars
or host_vars).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1877426
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the OSP context, during the rolling update the playbook fails
with the following error:
'''
ERROR! The field 'hosts' has an invalid value, which includes an
undefined variable. The error was: list object has no element 0
'''
This PR just change the hosts field providing a valid mons group
value.
Closes: https://bugzilla.redhat.com/1876803
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
On DCN environments, or when multiple ceph cluster are configured,
we need to specify the cluster name before running the command or
the rolling_update playbook will fail during minor updates.
Closes: https://bugzilla.redhat.com/1876447
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
There's no need to use `ignore_errors: true` on these tasks.
Using a loop on the task stopping mon daemons allows us to avoid
duplicating this task, the `ignore_errors` isn't needed here because it
won't fail the playbook if one of the ID doesn't exist (shortname vs. fqdn)
Using the right condition on the task starting the mgr daemon allows us
to avoid using an `ignore_errors: true` as well.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using fqdn in inventory host file, this task will fail because the
mds is registered with its shortname.
It means we must use `mds_to_kill_hostname` in this task.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1869837
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph-volume can generate large logs at some point.
debug logs by definition should be enabled only when debugging.
Let's make it customizable with a variable which is set to `False` by
default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When running `infrastructure-playbooks/purge-cluster.yml` twice, it fails the
second time on the `ensure rbd devices are unmapped` task, because `rbdmap`
isn't installed anymore at that point.
This commit adds a check that ensures `rbdmap` is available, and skips the
`ensure rbd devices are unmapped` task if it isn't.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
This handles missing /etc/ceph/osd, by ensuring we actually found files in
`/etc/ceph/osd` before trying to slurp their content.
This also add a missing `| default(False)` to avoid fowlloing error:
```
fatal: [ceph01]: FAILED! =>
msg: |-
The conditional check 'ceph_osd_data_json[item.2]['encrypted'] | bool' failed. The error was: error while evaluating conditional (ceph_osd_data_json[item.2]['encrypted'] | bool): 'dict object' has no attribute 'encrypted'
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1862416
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The task "remove old systemd unit file" under "switching from
non-containerized to containerized ceph rgw" only removes
the ceph-radosgw@.service file. The task should also remove
the ceph-radosgw.target file, like the "remove old systemd unit
files" tasks for the mons, mgrs, osds, etc, in order to clean up
all of the unused systemd unit files.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
Otherwise it leaves an empty directory.
When shrinking and redeploying multiple OSDs you have no guarantee it
will reuse the same osd id.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition of 155e2a2, the active mds daemons isn't stop/start
correctly as opposed as the other services so that daemon doesn't come
back after the upgrade.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1861688
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The dashboard upgrade workflow should do the same process than the ceph
upgrade otherwise any systemd unit modification won't be apply on the
monitoring/dashboard stack.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859173
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
During the daemon upgrade we're
- stopping the service when it's not containerized
- running the daemon role
- start the service when it's not containerized
- restart the service when it's containerized
This implementation has multiple issue.
1/ We don't use the same service workflow when using containers
or baremetal.
2/ The explicity daemon start isn't required since we'are already
doing this in the daemon role.
3/ Any non backward changes in the systemd unit template (for
containerized deployment) won't work due to the restart usage.
This patch refacts the rolling_update playbook by using the same service
stop task for both containerized and baremetal deployment at the start
of the upgrade play.
It removes the explicit service start task because it's already included
in the dedicated role.
The service restart tasks for containerized deployment are also
removed.
Finally, this adds the missing service stop task for ceph crash upgrade
workflow.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1859173
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Set the cephadm cmd as a fact instead of rewriting the same command
over and over.
This also fix an issue when using docker as container engine because
the --docker cephadm parameter should be use before the subcommand
not after.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds a new playbook for deploying ceph via cephadm.
This also adds a new dedicated tox file for CI purpose.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is a partial revert of b38019e because we don't want to execute
the whole play on the monitor otherwise if we have some empty group
like rgws or mdss then the orchestrator commands will still be
executed.
Instead we should keep the real target group name at play level and
delegate the orchestator commands to the monitor. The whole play
will be skipped is the group is empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Print a message at the end of the playbook to inform users that they
don't have to user ceph-ansible playbooks anymore as everything else
need to be done via cephadm (day 2 operation).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When reporting the orchestrator service/daemon list at the end of the
playbook, we can use the --refresh option otherwise we could have
an outdated output.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After adopting a monitor we need to wait that monitor to join back
the quorum before moving to the next node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Like rolling_update or switch2container playbooks, we need to set/unset
some osd flags before and after the OSD daemons adoption.
This also adds a task for waiting for clean pgs at then of an OSd node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
At the end of the playbook we can show the orchestrator status like
we do with the ceph status in initial deployment.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It's better to use the --placement parameter when using ceph orch apply
commands to avoid confusion in the parameters.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
cephadm uses default value for dashboard container images which need to
be customized by ansible for upstream or downstream purpose.
This feature wasn't present when cephadm-adopt.yml has been designed.
Also set the container_image_base variable for upgrade purpose.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It looks like we can't run the ceph orch apply commands on nodes other
than monitors even if it used to work in the past.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph config assimilate-conf command requires the client.admin
keyring which isn't present on all nodes most of the time.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By default, ansible gathers facts from facter and ohai if installed on
the remote nodes, given we don't need them, let's exclude these facts
from our facts gathering
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook.
The environment file used in the rgw systemd template is rendered when
executing the `ceph-rgw` role but during a new run of the playbook (in
order to scale out rgw instances), handlers are triggered from `ceph-osd`
role which is run before `ceph-rgw`, therefore it tries to start the new
rgw daemon whereas its corresponding environment file hasn't been
rendered yet and fails like following:
```
ceph-radosgw@rgw.ceph4osd3.rgw1.service failed to run 'start-pre' task: No such file or directory
```
This commit moves the tasks generating this file in `ceph-config` role
so it is generated early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1851906
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If a failure occurs in ceph-validate, the upgrade playbook keeps running
where we expect it to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The commit adds a new playbook for converting an existing ceph cluster
deployed by ceph-ansible to the cephadm orchestrator.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit makes the images pulling skipped if podman isn't installed
on the machine.
In OSP context, the podman installation is done later in the workflow,
it means all `podman pull` commands will fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1849559
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we only have one scenario since nautilus then we can just move
the container start command from ceph-osd-run.sh to the systemd unit
service.
As a result, the ceph-osd-run.sh.j2 template and the
ceph_osd_docker_run_script_path variable are removed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We shouldn't set this flag when running switch_to_containers playbook.
Otherwise the playbook fails waiting for pgs to be clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The systemd LOAD and ACTIVE fileds could have more than one space between
both values.
This update the systemd regex the same way we're using it in different
part of the code.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1843500
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The dashboard nodes (alertmanager, grafana, node-exporter, and prometheus)
were not manage during the docker to podman migration.
This adds the systemd container template of those services to a dedicated
file (systemd.yml) in order to include it in the docker2podman playbook.
This also adds the dashboard container images pull from docker to podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829389
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The docker2podman playbook only installs the podman package and updates
the systemd units with the right container_binary value.
We never pull the container image so if one service is restarted then
the container image will be pulled first before the service can start
which could cause longer downstream.
To avoid to download the container image from internet again we can just
pull it from the local docker daemon.
The container_{binding,package,service}_name variables are removed
because they are only used in the ceph-container-engine role which
isn't call in this playbook.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using skipped variables with from_json filter and python2 then we
need to have a default value otherwise the skipped task will fail.
Unexpected templating type error occurred on
({{ (ceph_volume_lvm_list.stdout | from_json) }}): expected string or
buffer
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790472
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since [1] we need to set pacific for the required OSD release during the
upgrade.
[1] https://github.com/ceph/ceph/commit/cc99c3bc
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The workflow in this playbook should be the same than in rolling_update,
we should first set noout and nodeep-scrub flags before migrating the
first osd and unset osd flags after the last osd is migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When setting/unsetting osd flags, we can use `tasks_from` when importing
`ceph-facts` role to save some times given that we only need this role
for setting `container_binary`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must call `ceph-osd` role from `container_options_facts.yml` because
ceph-osd-run.sh.j2 needs variables set in this file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1819681
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commits removes these two symlinks.
They were there for backward compatibility and were marked deprecated as
of stable-4.0
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adding `--all` to the `systemctl list-units` command in order to get
*all* osds id on the node (including stoppped osds). Otherwise, it will
purge the cluster but there will be leftover after that.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1814542
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since Ceph Octopus is python3 only we don't need to specify the max open
files anymore with the container engine.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We only disable the ceph-osd services but not the ceph-volume lvm
services during the filestore to bluestore migration.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We should add retry/delay to check the presence of the rbdmirror daemon
in the cluster status because the status takes some time to be updated.
Also the metadata.hostname isn't a good key to check because it doesn't
reflect the ansible_hostname fact. We should use metadata.id instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This playbook was using mds systemd condition.
Also a command task was using pipeline which is not allowed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph-facts are running on localhost so if this node is using a
different OS/release that the ceph node we can have a mismatch between
docker/podman container binary.
This commit also reduces the scope of the ceph-facts role because we only
need the container_binary tasks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When running environment with OSDs having ID with more than 2 digits,
some tasks don't match the system units and therefore, playbook can fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1805643
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We need to call ceph-facts only for setting `container_binary`.
Since this task has been isolated we can use `tasks_from` to only execute the
needed task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the filestore configuration was using a dedicated journal with either
a partition or a LV/VG then we need to reuse this for bluestore DB.
When filestore is using a raw devices then we shouldn't destroy
everything (data + journal) but only data otherwise the journal
partition won't exist anymore.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790479
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of running shring-osd tasks on localhost and delegating most of
them to the first monitor, run all of them on the first monitor
directly.
This has the added advantage of becoming root on the monitor only, not
on localhost.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
We only support python3 so renaming all ceph python packages.
Some ceph packages were missing from the list (ceph-mon, ceph-osd or
rbd-mirror) or didn't exist anymore (ceph-fs-common, libcephfs1).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit increases the default values for the following variable
consumed in switch-from-non-containerized-to-containerized-ceph-daemons.yml
playbook.
This also moves these variables in `ceph-defaults` role so the user can
set different values if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783223
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fix purge cluster failed when local container images does not exist.
Purge node-exporter and grafana-server only when dashboard_enabled is set to True.
Signed-off-by: wujie1993 qq594jj@gmail.com
If the playbook is used on a host running bluestore OSDs then the
osd_fsid_list won't be filled because the bluestore OSDs are reported
with 'type: block' via ceph-volume lvm list command but we are looking
for 'type: data' (filestore).
TASK [zap ceph-volume prepared OSDs] *********
fatal: [xxxxx]: FAILED! =>
msg: '''osd_fsid_list'' is undefined
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If the OSD node is already using bluestore OSDs then we should skip
all the remaining tasks to avoid purging OSD for nothing.
Instead we warn the user.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790472
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the PV is already removed from the devices then we should not fail
to avoid errors like:
stderr: No PV found on device /dev/sdb.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When upgrading from RHCS 3.x where ceph-metrics was deployed on a
dedicated node to RHCS 4.0, it fails like following:
```
fatal: [magna005]: FAILED! => changed=false
gid: 0
group: root
mode: '0755'
msg: 'chown failed: failed to look up user ceph'
owner: root
path: /etc/ceph
secontext: unconfined_u:object_r:etc_t:s0
size: 4096
state: directory
uid: 0
```
because we are trying to run `ceph-config` on this node, it doesn't make
sense so we should simply run this play on all groups except
`[grafana-server]`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1793885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When osd_auto_discovery is set then we need to refresh the
ansible_devices fact between after the filestore OSD purge
otherwise the devices fact won't be populated.
Also remove the gpt header on ceph_disk_osds_devices because
the devices is empty at this point for osd_auto_discovery.
Adding the bool filter when needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We still need --destroy when using a raw device otherwise we won't be
able to recreate the lvm stack on that device with bluestore.
Running command: /usr/sbin/vgcreate -s 1G --force --yes ceph-bdc67a84-894a-4687-b43f-bcd76317580a /dev/sdd
stderr: Physical volume '/dev/sdd' is already in volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
Unable to add physical volume '/dev/sdd' to volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
/dev/sdd: physical volume not initialized.
--> Was unable to complete a new OSD, will rollback changes
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792227
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the new ceph status registered in `ceph_status` will report `fsmap.up` =
0 when it's the last mds given that it's done after we shrink the mds,
it means the condition is wrong. Also adding a condition so we don't try
to delete the fs if a standby node is going to rejoin the cluster.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787543
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
play vars have lower precedence than role vars and `set_fact`.
We must use a `set_fact` to reset these variables.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds a package installation task in order to install podman
during the docker-to-podman.yml migration playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Francesco Pantano
Benoît Knecht
Kevin Coakley
wujie1993