Instead of using ceph auth get-or-create command via the ansible command
module then we can use the ceph_key module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph_key module currently only supports the json output for the
info state.
When using this state on an entity then we something want the output
as:
- plain for copying it to another node.
- json in order to get only a subset information of the entity (like
the key or caps).
This patch adds the output_format parameter which uses json as a
default value for backward compatibility. It removes the internal and
hardcoded variable also called output_format.
In addition of json and plain outputs, there's also xml and yaml
values available.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This file is currently deployed with '0644' ownership making this file
readable by any user on the system.
Since it contains sensitive information it should be readable by the
owner only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890119
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When running rhel8 containers on a rhel7 host, after zapping an OSD
there's a discrepancy with the lvmetad cache that needs to be refreshed.
Otherwise, the host still sees the lv and can makes the user confused.
If user tries to redeploy an OSD, it will fail because the LV isn't
present and need to be recreated.
ie:
```
stderr: lsblk: ceph-block-8/block-8: not a block device
stderr: blkid: error: ceph-block-8/block-8: No such file or directory
stderr: Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.
usage: ceph-volume lvm prepare [-h] --data DATA [--data-size DATA_SIZE]
[--data-slots DATA_SLOTS] [--filestore]
[--journal JOURNAL]
[--journal-size JOURNAL_SIZE] [--bluestore]
[--block.db BLOCK_DB]
[--block.db-size BLOCK_DB_SIZE]
[--block.db-slots BLOCK_DB_SLOTS]
[--block.wal BLOCK_WAL]
[--block.wal-size BLOCK_WAL_SIZE]
[--block.wal-slots BLOCK_WAL_SLOTS]
[--osd-id OSD_ID] [--osd-fsid OSD_FSID]
[--cluster-fsid CLUSTER_FSID]
[--crush-device-class CRUSH_DEVICE_CLASS]
[--dmcrypt] [--no-systemd]
ceph-volume lvm prepare: error: Unable to proceed with non-existing device: ceph-block-8/block-8
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886534
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Correctly set `osd_ids_non_container.stdout_lines` to an empty list if it's
undefined (i.e. in check mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The current task installs the ceph-crash key to "most" hosts via
"delegate_to". This key is only used by the ceph-crash daemon and should
just be installed on all hosts targeted by this role. There is no need
for using a delegated task.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
The service should be started after the ceph-osd systemd overrides has
been added, otherwise, the latter isn't considered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860739
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The container_binding_name package was only mandatory when we were
using the docker modules (docker_image and docker_container) but since
we manage both docker and podman containers without using the dedicated
module then we can remove it.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Using the + operation on two lists doesn't filter out the duplicate
keys.
Currently each OSDs is started (via systemd) twice.
Instead we could use the union filter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
`all_daemons` scenario can't handle pools with `size: 3` because we have
1 osd node in root=HDD and two nodes in root=default.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds radosgw_zone ansible module for replacing the command module
usage with the radosgw-admin zone command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_zonegroup ansible module for replacing the command
module usage with the radosgw-admin zonegroup command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_realm ansible module for replacing the command module
usage with the radosgw-admin realm command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_user ansible module for replacing the command module
usage with the radosgw-admin user command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This playbook isn't needed anymore, we can achieve this operation by
running main playbook with `--limit` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the ceph_fs ansible module for replacing the command module
usage with the ceph fs command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
tests/conftest.py and tests present in tests/functional/tests/ has been
missed from previous commit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It's time to remove this backward compatibility. Users had enough time
to convert their openstack_keys and key values.
We now fail in ceph-validate if the caps key isn't set.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently the `ceph_key` module doesn't support using a different
keyring than `client.admin`.
This commit adds the possibility to use a different keyring.
Usage:
```
ceph_key:
name: "client.rgw.myrgw-node.rgw123"
cluster: "ceph"
user: "client.bootstrap-rgw"
user_key: /var/lib/ceph/bootstrap-rgw/ceph.keyring
dest: "/var/lib/ceph/radosgw/ceph-rgw.myrgw-node.rgw123/keyring"
caps:
osd: 'allow rwx'
mon: 'allow rw'
import_key: False
owner: "ceph"
group: "ceph"
mode: "0400"
```
Where:
`user` corresponds to `-n (--name)`
`user_key` corresponds to `-k (--keyring)`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit drops nested jinja construction in this set_fact task.
It also rename it to `container_exec_start_osd`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This job is redundant with 'collocation' job.
The only difference is osd/rgw collocation so let's add this usecase in
'collocation'.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19d683d7acfb5344b38ac1ba4c123dcdd4d80f35)
ceph-volume recently introduced a breaking change because of a `lvm
batch` refactor.
when rerunning `lvm batch --report --format json` on existing OSDs, it
doesn't output a valid json on stdout.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This reverts commit 7348e9a253.
Since the nfs-ganesha rpm build for CentOS 8 has been fixed, and
the nfs-ganesha segfault caused by an issue in librgw has also been
fixed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this commit changes defaults value in default pool definitions.
there's no need to define `pg_num`, `pgp_num`, `size` and `min_size`,
`ceph_pool` module will use the current default if needed.
This also drops the 3 following `set_fact` in `ceph-facts`:
- osd_pool_default_pg_num,
- osd_pool_default_pgp_num,
- osd_pool_default_size_num
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit modifies how the `pg_autoscaler` feature is handled by the
ceph_pool module.
1/ If a pool has the pg_autoscaler feature enabled, we shouldn't try to
update pg/pgp.
2/ Make it more readable
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit ensure all ceph-ansible modules pass flake8 properly.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the `osd_auto_discovery` scenario support in the
filestore-to-bluestore playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881523
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Dimitri Savineau <dsavinea@redhat.com>
In case of deploying new monitor node to an existing cluster,
osd_pool_default_crush_rule should be taken from running monitor because
ceph-osd role won't be run and the new monitor will have different
osd_pool_default_crush_role from other monitors.
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
This change default value of grafana-server group name.
Adding some tasks in ceph-defaults in order to keep backward
compatibility.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
Gaudenz Steinlin
Guillaume Abrioux
Benoît Knecht
Wong Hoi Sing Edison
Seena Fallah