This patch changes the `when:` keys so that they have no jinja2
delimiters. This avoids Ansible warnings which could turn into
errors in a future Ansible release.
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
This commit refacts the code regarding all `set_osd_pool_default_*`
related tasks by avoiding usage of useless `set_fact` to determine
whether a key is present in `ceph_conf_overrides`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The rbd pool is the default pool that gets created during ceph cluster
initializaiton. If we act on the rbd related operations too early, the
rbd pool does not exist yet. Move the call to perform rbd operations
to a later stage after other pools have been created.
The rbd_pool.yml playbook has all the operations related to the rbd pool.
Replace the always_run (deprecated) directive with check_mode.
Most of the ceph related tasks only need to run once. The run_once directive
executes the task on the first host.
The ceph sub-command to delete a pool is delete (not rm).
The changes submitted here were tested with this ceph version.
ceph version 0.94.9-9.el7cp (b83334e01379f267fb2f9ce729d74a0a8fa1e92c)
This upload includes these changes:
- Use the fail module (instead of assert).
- From luminous release, the rbd pool is no longer created by default.
Delete the code to create the rbd pool for luminous release
- Conform the .yml files to use the suggested syntax.
The commands are executed on the mcp nodes and I think shell ansible module
is the right one to use. The command module is used to execute commands on
remote nodes. I can make the change to use command module if that is
prefrerred.
Specify the timeout flag to ceph-create-keys, which causes it to time out
if a monitor quorum isn't achieved. This overrides the default timeout
of 10 minutes, causing ceph-ansible to fail faster in the event of cluster
network issues.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a new parameter `admin_secret` that allow to deploy a ceph cluster
with a custom admin secret.
Fix: #1630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add an extra variable to the openstack pools, which creates them with
defined rules. This will allow to place different pools on e.g.
different type of disks.
This commit will also set a new default rule when defined and move
the rbd pool to the new rule.
For newly created cluster the command: ceph --cluster {{ cluster }} osd
pool get rbd size does not respond properly.
We only want to check if the rbd pool exists, so we know use an ls |
grep approach.
Closes: https://github.com/ceph/ceph-ansible/issues/1547
Signed-off-by: Sébastien Han <seb@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is to allow ceph-mgr daemons to remote control
osd and mds daemons with MCommand messages.
Fixes: http://tracker.ceph.com/issues/19713
Signed-off-by: John Spray <john.spray@redhat.com>
Without this, we don't test the mgr role so we need to add it.
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
After the jewel release the mon startup does not generate keys, but it's
still harmless to call ceph-create-keys with jewel because this task has
a 'creates' argument that will cause it not to run if the keys already
exist.
Removing this when condition also allows the downstream CI tests to
install kraken or luminous without resetting ceph_stable_release, which does not
pertain to rhcs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Add the possibility to create openstack pools and keys even for containerized deployments
Fix: #1321
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We shouldn't test directly the value of
`ceph_conf_overrides.global.osd_pool_default_pg_num` because this can
cause the playbook to fail if the key `global` is not present in
`ceph_conf_overrides`. Therefore we have to use the facts that have been
defined earlier.
Fix: #1242
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This patch makes sure we set the proper pool size on the rbd pool.
Usually during bootstrap the rbd pool size is not honoured so we need to
add this workaround.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we introduced config_overrides we removed a lot of options from
the default template. In some cases, like mds pool, openstack pools etc
we need to know the amount of PGs required. The idea here is to skip the
task if ceph_conf_overrides.global.osd_pool_default_pg_num is not define
in your `group_vars/all.yml`.
Closes: #1145
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Task put initial mon keyring in mon kv store from
ceph-mon/tasks/ceph_keys.yml is failing when cephx is disabled. The root
cause is that variable monitor_keyring is not populated by any task from
deploy_monitors.yml.
Fixes: #1211
Signed-off-by: Sébastien Han <seb@redhat.com>
Once we have our first monitor up and running we need to add it to the
monitor store as a safety measure. Just in case the local file gets
deleted and you need to add a new monitor. Now you can retrieve this key
like this:
ceph config-key get initial_mon_keyring > initial_mon_keyring.txt
Signed-off-by: Sébastien Han <seb@redhat.com>
If previous check was not run, .stdout_lines is not a valid key on the dictionary.
To get around this, use .get("stdout_lines") instead.
Also add in a default empty list
Users reported that pool_default_pg_num is not honoured for the default
pool 'rbd'. So now we check the pg num value for the RBD pool and if it
does not match pool_default_pg_num then we delete and recreate it.
We also make sure the pool is empty first, just in case someone changed
the value manually and didn't reflect the change in ceph-ansible.
The only issue with this patch is that the pool ID will not be 0 anymore
but more likely 1.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is purely a refactor. Converts when 'and' conditionals into lists
rather than multiline strings. This does not work for nested
conditionals, but those can be formated with indents.
Moves one line when statements onto the same line as the when command
itself.
A small logic bug was found in ceph-osd/tasks/check_devices.yml which
which was also fixed.
Signed-off-by: Sam Yaple <sam@yaple.net>
we now have the ability to enable the `cluster` variable with a specific
value that will determine the name of the cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Major Hayden
Guillaume Abrioux
Al Lau
Douglas Fuller
Sébastien Han
Jason Dillaman
Christian Zunker
yanyx
John Spray
Andrew Schoen
Konstantin Shalygin
WingKai Ho
Andrew Schoen
Musee Ullah
tynorth-cisco
Daniel Marks
Sam Yaple
Li Peng
Kyle Squizzato
Huamin Chen