This patch simplifies the checks and installation tasks for NTP.
Debian and Red Hat had a check for NTP's presence but would then
install NTP right afterwards anyways. In addition, there were
tasks for atomic that weren't used anywhere else in the role.
This patch also uses a dynamic include to reduce delays from
skipped tasks.
Ansible throws warnings when using yum/dnf/rpm with the command
module:
[WARNING]: Consider using yum module rather than running yum
This patch adds the `warn: no` argument to suppress the warnings
in the Ansible output.
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
The installation process is now described as follow:
* you still have to choose a 'ceph_origin' installation method. The
origin can be a 'repository' (add a new repository), distro (it will use
the packages provided by the native repo source of your distribution),
local (only available on redhat system, it installs locally built
packages). This option is not well tested, so use it carefully
* if ceph_origin == 'repository' you will have to decide what kind of
repository you want to enable:
- community: corresponds to the stable upstream/community version
- enterprise: corresponds to the stable enterprise/downstream version
(basically you are a red hat customer)
- dev: it will install ceph from packages built out of the github
development branches
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Resolves issue: Multiple RGW Ceph.conf Issue #1258
In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.
Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com
Modified ceph-defaults and ran generate_group_vars_sample.sh
group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.
Uncommented added variables in ceph-defaults
Updated tests by adding value for radosgw_interface
Added radosgw_interface to centos cluster tests
Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh
In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
It is mandatory now to set the Ceph version you want to install, e.g:
ceph_stable_release: luminous
To find the release names, you can look at the release not doc:
http://docs.ceph.com/docs/master/release-notes/
Signed-off-by: Sébastien Han <seb@redhat.com>
e8187f6 does not fix the ipv6 as expected since `ansible_default_*` are
filled with the IP address carried by the network interface used by the
default gateway route. By the way, it assumes that the MON_IP address will
be this IP address which is not always the case.
We need to keep using the previous fact but add some intelligence in the
template to determine how to retrieve the ipv4|ipv6 address since the path
to the fact in `hostvars` is not the same according to ipv4 vs ipv6 case.
Fix: 1569
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We only check for everything expect 'distro' because that
is a valid way of deploying RHCS, with preprepared repos
present on the nodes.
Signed-off-by: Sébastien Han <seb@redhat.com>
Restore the check_socket that was removed by `5bec62b`.
This commit also improves the logging in `restart_*_daemon.sh` scripts
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Until now, only the first task were executed.
The idea here is to use `listen` statement to be able to notify multiple
handler and regroup all of them in `./handlers/main.yml` as notifying an
included handler task is not possible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ntp is still installed even if ntp_service_enabled is set to false.
That could be a problem if the time synchronization is managed by
something else than ceph-ansible or if you want to use different NTP
implementation as suggested in #1354.
Fixes: #1354
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guits <gabrioux@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Only when ceph_origin == "upstream", install_on_redhat.yml will include
redhat_ceph_repository.yml, same as debian.
In redhat_ceph_repository.yml, ceph_custom_repo will be added.
But in check_mandatory_vars.yml, ceph_origin=="upstream" can't be combined
with ceph_custom
For readibility and clarity we do not run any tasks directly in the
main.yml file. This file should only contain include, which helps us
later to apply conditionnals if we want to.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is done for preventing of their use-before-definition for osd scenarios checks (should be removed after a refactor has properly seperated all the checks into appropriate roles).
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
For some providers (such as upcoming Linode support), some NICs may have
multiple IP addresses. (In the case of Linode, the only NIC has a public
and private IP address.) This is normally okay as we can use the
ceph.conf cluster_network and public_network variables to force the
monitor to listen on the addresses we want. However, we also need
ansible to set the correct monitor IP addresses in "mon hosts" (i.e. the
addresses the monitors will listen on!). This new monitor_address_block
setting tells ansible which IP address to use for each monitor.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
-First install ceph into a directory with CMake
cmake -DCMAKE_INSTALL_LIBEXECDIR=/usr/lib -DWITH_SYSTEMD=ON -DCMAKE_INSTALL_PREFIX:PATH:=/usr <ceph_src_dir> && make DESTDIR=<install_dir> install/strip
-Ceph-ansible copies over the install_dir
-User can use rundep_installer.sh to install any runtime dependencies that ceph needs onto the machine from rundep
* changed s/colocation/collocation/
* declare dmcrypt variable in ceph-common so the variables check does
not fail
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes#845 for containerized deployments. We now also mount the
/etc/localtime volume in the containers in order to synchronize the host
timezone with the container timezone.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Journal size is not mandatory anymore, a default from 5GB is being
added. A simple warning message will show up if the size is set to
something below 5GB.
Signed-off-by: Sébastien Han <seb@redhat.com>
Major Hayden
Sébastien Han
Zack Cerza
Alfredo Deza
SirishaGuduru
Guillaume Abrioux
Andrew Schoen
Alberto Murillo
Ken Dreyer
Shengjing Zhu
Daniel Marks
Eduard Egorov
Patrick Donnelly
Daniel Lin
Ivan Font