Prior to this change, each ceph cluster node would end up with several
"qemu-client-$pid.log" files owned by root. The [client] section would
capture *all* client activity (for example the "ceph health" command,
etc), not just librbd-in-qemu.
Restrict this section to libvirt clients only so that we don't generate
these spurious log files for other Ceph client traffic.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Journal size is not mandatory anymore, a default from 5GB is being
added. A simple warning message will show up if the size is set to
something below 5GB.
Signed-off-by: Sébastien Han <seb@redhat.com>
The ceph-common role fails when you run ansible with --check. Adding
always_run to a few tasks makes the check go through easier (although
it's not foolproof).
This will help if the path to the iso exists in the originating server but not
in the remote paths. This issue is not seen if using /tmp/file.iso but does
show up when using nested paths.
Signed-off-by: Alfredo Deza <adeza@redhat.com>
Resolves: rhbz#1355762
init_system was getting the value of "systemd\n"
and was later compared to be equal to "systemd"
making the wrong scripts to be executed.
Signed-off-by: Alberto Murillo <alberto.murillo.silva@intel.com>
Add the ability to use a custom repo, rather than just upstream, RHEL,
and distro. This allows ansible to be used for internal testing.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
If the docker image cannot be retrieved we will fail this task silently
and the playbook ultimately succeeds without a successful deployment.
This change makes it so we fail the playbook immediately.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Ceph has the ability to export it's filesystem via NFS using Ganesha.
Add a ceph-nfs role that will start Ganesha and export the Ceph
filesystems.
Note that, although support is going in to export RGW via NFS, this is
not working yet.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
- Check for nmap being available was not running as a local_action, when the checks using nmap were
- Various fixes on Ansible 2.x now that the above is working
This causes ceph-ansible scripts to fail when targeting Centos7 machines.
Installation fails because newer ceph package dependencies provided
by ceph-release-{version}.noarch.rpm were overridden by older
package dependency versions in default distribution repositories,
due to the fact that default distribution repositories have higher
priority.
Docker makes it difficult to use images that are not on signed
registries. This is a problem for developers, who likely won't have
access to a registry with proper signed certificates.
This allows the ability to use any docker image on the machine running
vagrant/ansible. The way it works is that the image in question is
exported locally, then sent to each target box and imported there.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
This will allow nodes to install rhcs that do
not have access to the internet.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: rhbz#1337601
In order to align all Ansible versions, we now use the full path for the
template. We rely on `role_path` variable. Now all the tasks using
the template module have a uniform syntax.
Might fix issue raised in #483
Signed-off-by: Sébastien Han <seb@redhat.com>
The scenarios were not being accurately compared to ensure that:
* A single scenario was choosen
* ONLY a single scenario was choosen
This solution does not scale for long, but that can be addressed in a
different patchset.
By default, this roles will create a ceph config file and get the admin
key. You can optionnally add other users, keys and pools for your tests.
Closes: #769
Signed-off-by: Sébastien Han <seb@redhat.com>
Add support to allow ceph-ansible to install and
configure Ceph on Debian on the ppc64le architecture.
Canonical has ppc64le Debian packages in Ubuntu distros
and on Ubuntu Cloud Archive. Both of which can be installed
and configured using the 'distro' or 'uca' options in
ceph-ansible when this patch is used.
Signed-off-by: Samuel Matzek <smatzek@us.ibm.com>
Since ##461 we have been having the ability to override ceph default
options. Previously we had to add a new line in the template and then
another variable as well. Doing a PR for one option was such a pain. As
a result, we now have tons of options that we need to maintain across
all the ceph version, yet another painful thing to do.
This commit removes all the ceph options so they are handled by ceph
directly. If you want to add a new option, feel free to to use the
`ceph_conf_overrides` variable of your `group_vars/all`.
Risks, for those who have been managing their ceph using ceph-ansible
this is not a trivial change as it will trigger a change in your
`ceph.conf` and then restart all your ceph services. Moreover if you did
some specific tweaks as well, prior to run ansible you should update the
`ceph_conf_overrides` variable to reflect your previous changes.
To avoid service restart, you need to know a bit of ansible for this,
but generally the idea would be to run ansible on a dummy host to
generate the ceph.conf, then scp this file to all your ceph hosts and
you should be good.
Closes: #693
Signed-off-by: Sébastien Han <seb@redhat.com>
This is purely a refactor. Converts when 'and' conditionals into lists
rather than multiline strings. This does not work for nested
conditionals, but those can be formated with indents.
Moves one line when statements onto the same line as the when command
itself.
A small logic bug was found in ceph-osd/tasks/check_devices.yml which
which was also fixed.
Signed-off-by: Sam Yaple <sam@yaple.net>
This adds a helper fact that uses the ``init_system`` fact to determine if
we should be using systemd or not when controlling services.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The ceph-osd role currently uses ansible_service_mgr, which is a fact
only available on ansible 2.x and greater. This commit sets a similar
fact called init_system which will store the contents of /proc/1/comm
(systemd, init, etc.) and then references it ceph-osd instead.
Closes#741
This adds support to allow the install of Ceph from the
Ubuntu Cloud Archive. The Ubuntu Cloud Archive provides newer
release of Ceph than the normal Ubuntu distro repository.
Signed-off-by: Samuel Matzek <smatzek@us.ibm.com>
Since developement versions of Ceph are after infernalis a package split
happened. So basically ceph-mon, ceph-osd, ceph-mds need to be
installed.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will allow a user to conditionally install the ceph package on rpm
based systems. Installing this package is not required or wanted in
versions passed infernalis.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Introducing a new config option: `radosgw_civetweb_bind_ip` which points
to the `ansible_default_ipv4` by default. You can override this
variable. Use ansible facts to put a proper value.
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes the ceph.conf template so that it will look for an inventory
defined value for monitor_interface or for monitor_interface defined in
a group_vars file.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This fixes a bug where monitor_interface might be set in your inventory
file and not by using group_vars or --extra-vars causing the template to
use the default address of 0.0.0.0 instead of the defined
monitor_interface.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Instead of creating the RBD client socket path three different places
in three different ways, this creates it once. Ceph on OpenStack users
have the option to customize the permissions of the RBD client
directories.
Fixes#687
we now have the ability to enable the `cluster` variable with a specific
value that will determine the name of the cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph.conf.j2 template requires a new line between mon_containerized_deployment_with_kv and fsid variables
With this commit , i have added a new line for better readablity
ceph.conf file generation task in ceph-common role was getting failed
because it ansible cant find defination of varriable mon_containerized_deployment_with_kv
This fix declare mon_containerized_deployment_with_kv under ceph-common/defaults/main.yml which fixes this issue
Signed-off-by: ksingh7 <karan.singh731987@gmail.com>
Some versions (?) of libvirt provide a 'libvirt' group instead of
'libvirtd'. (Observed with libvirt-daemon-1.2.17-13.el7_2.2.x86_64.)
This makes the RBD client directory owner and group configurable to
allow for this.
This would allow users who don't know what interface to provide to
give an IP address to use for the monitor instead.
Note: the includes are needed in ceph.conf.j2 because without them
jinja2 can not properly evaluate the template and will complain about a
missing 'ansible_interface' variable. The includes allow the template to
be evaluated correctly and then the correct include will be used during
render time.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Where it was located before meant it might be skipped if you don't run
tasks with the package-install tag. This fixes the situation where you
want to configure an rhcs node, but do not want to do any package
installs.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When installing RHCS there is an option to install from distro provided
packages, this commit modifies the check to allow that to happen.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
changing the name of the directory causes issues with git subtree which
will create new commits. Creating a symlink for vagrant to be happy.
Signed-off-by: Sébastien Han <seb@redhat.com>
in order to have a build on the galaxy we need to have a proper
dependency set for ceph-common. On the galaxy ceph-common does not
exist, only ceph.ceph-common is available.
Signed-off-by: Sébastien Han <seb@redhat.com>
this commit introduces the ability to use fqdn for mon/mds name while
generation the ceph.conf file from the template.
Simply turn mon_use_fqdn and or mds_use_fqdn to true to use FQDN.
Signed-off-by: Sébastien Han <seb@redhat.com>
This adds a script, generate_group_vars_sample.sh, that generates
group_vars/*.sample from roles/ceph-*/defaults/main.yml to avoid
discrepancies between the sets of files. It also converts the line
endings in the various main.yml from DOS to Unix, since generating the
samples was spreading the line ending plague around to more files.
0644 should never be a directory mode. 1777 makes it so that any user
can create a ceph client, not just root. (This is helpful if, for
instance, nova-compute is running as non-root.)
If using another method to generate a consistent fsid, then we can
skip creation of an (unused) cluster UUID file. If cephx is disabled
as well, we can skip creation of the fetch directory entirely.
The firewall checks can fail for any number of reasons -- e.g., the
ceph cluster hostnames are unresolvable from the ansible host, or the
ports are filtered by some intermediate hop, etc. Make two changes to
make those checks better:
* Set pipefail when running the checks, so if nmap itself fails the
command will be marked as 'failed'. Specifically, this fixes the
case where the hostnames cannot be resolved.
* Add a new variable, check_firewall, which can be used to disable
checks entirely. Specifically, this fixes the case where some
intermediate firewall filters the ports, so nmap returns "filtered".
Installs on RHEL with ceph_origin set to distro previously would fail
because no packages would get installed, but all of the checks passed
fine. This adds support for ceph_origin: distro, simply installing the
packages using yum/dnf and assuming that the sysadmin has provided a
repository containing them.
This also supports the use case where Satellite or a similar local
mirror is in use, and the admin does not or cannot use the additional
repositories the role would otherwise add.
In our use case we might only be configuring mons and not osds in the
same call, so we don't want to check variables needed for osds when they
are not needed to configure a mon.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Martin Bukatovic
Leseb
James Saint-Rossy
Ken Dreyer
Kalle Happonen
Alfredo Deza
Daniel Gryniewicz
Ivan Font
Alberto Murillo
Matthew Rees
Huamin Chen
David C Wang
Tino Schmeier
Andrew Schoen
Sam Yaple
Samuel Matzek
Stephan Hohn
Matt Thompson
Chris St. Pierre
Ben England
ksingh7
runsisi
pprokop
François Charlier
Zack Cerza