This commit ensure all ceph-ansible modules pass flake8 properly.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
(cherry picked from commit beda1fe773)
The dashboard/monitoring stack can be deployed via the dashboard_enabled
variable. But there's nothing similar if we can to remove that part only
and keep the ceph cluster up and running.
The current purge playbooks remove everything.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786691
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8e4ef7d6da)
This introduces a new variable `dashboard_network` in order to support
deploying the dashboard on a different subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1927574
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f4f73b6197)
The ceph crash insatll checkpoint callback was missing in the main
playbooks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 993d06c4d9)
Add any_errors_fatal: true in cephadm-adopt playbook.
We should stop the playbook execution when a task throws an error.
Otherwise it can lead to unexpected behavior.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1976179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3b804a61dd)
Instead of reusing the condition 'inventory_hostname in groups[osds]'
on each device facts tasks then we can move all the tasks into a
dedicated file and set the condition on the import_tasks statement.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d704b05e52)
We currently don't check if the logical volume used in lvm_volumes list
for either bluestore data/db/wal or filestore data/journal exist.
We're only doing this on raw devices for batch scenario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 55bca07cb6)
When using dedicated devices for db/journal/wal objecstore with
ceph-volume lvm batch then we should also validate that those devices
exist and don't use a gpt partition table in addition of the devices
and lvm_volume.data variables.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 808e7106de)
Instead of using findmnt command to find the device associated to the
root mount point then we can use the ansible_mounts fact.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7e50380f7f)
Instead of doing two parted calls we can check first if the device exist
and then test the partition table.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 14d458b3b4)
2888c08 introduced a regression as the check_devices tasks file was
only included based on the devices variable.
But that file also validate some devices from the lvm_volumes variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1906022
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ac0342b72e)
This adds the monitoring group in the "final cleanup play" so any cid
files generated are well removed when purging the cluster.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1974536
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 037d8cd05e)
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9758e3c513)
There's no benefit to gather facts again on each play in
rolling_update.yml
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2c77d0094c)
When calling the `ceph_key` module with `state: info`, if the ceph
command called fails, the actual error is hidden by the module which
makes it pretty difficult to troubleshoot.
The current code always states that if rc is not equal to 0 the keyring
doesn't exist.
`state: info` should always return the actual rc, stdout and stderr.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964889
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d58500ade0)
Starting RHCS 5, there's no ISO available anymore.
This removes all ISO variables and the ceph_repository_type variable.
Closes: #6626
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a05730b38a)
It was requested for us to update our alerting definitions to include a
slow OSD Ops health check.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1951664
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit 2491d4e004)
Since pacific is a stable release then we don't need to use shaman for getting
the pacific build.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds a github workflow for checking the signed off line in commit
messages.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8c09497567)
This adds the ansible --syntax-check test in the ansible-lint workflow
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5ed423ad88)
Do not rely on the inventory aliases in order to check if the selected
manager to be removed is present.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967897
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 26a7256c4c)
If multi-realms were deployed with several instances belonging to the same
realm and zone using the same port on different nodes, the service id
expected by cephadm will be the same and therefore only one service will
be deployed. We need to create a service called
`<node>.<realm>.<zone>.<port>` to be sure the service name will be unique
and well deployed on the expected node in order to preserve backward
compatibility with the rgws instances that were deployed with
ceph-ansible.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 31311b03ed)
We need to support rgw multisite deployments.
This commit makes the adoption playbook support this kind of deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fc784fc44c)
There's no need to copy this keyring when using nfs with mds
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8dbee99882)
When running the switch-to-containers playbook with multisite enabled,
the fact "rgw_instances" is only set for the node being processed
(serial: 1), the consequence of that is that the set_fact of
'rgw_instances_all' can't iterate over all rgw node in order to look up
each 'rgw_instances_host'.
Adding a condition checking whether hostvars[item]["rgw_instances_host"]
is defined fixes this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967926
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8279d14d32)
This is an unsupported configuration since there
are issues with RGW+NFS upgraded from Nautilus to Pacific.
This approach might be seen as a bit aggressive but it is preferable
to wait before upgrading in that case.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970003
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When monitors and rgw are collocated with multisite enabled, the
rolling_update playbook fails because during the workflow, we run some
radosgw-admin commands very early on the first mon even though this is
the monitor being upgraded, it means the container doesn't exist since
it was stopped.
This block is relevant only for scaling out rgw daemons or initial
deployment. In rolling_update workflow, it is not needed so let's skip
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970232
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7166cccbf)
When no `[mgrs]` group is defined in the inventory, mgr daemon are
implicitly collocated with monitors.
This task currently relies on the length of the mgr group in order to
tell cephadm to deploy mgr daemons.
If there's no `[mgrs]` group defined in the inventory, it will ask
cephadm to deploy 0 mgr daemon which doesn't make sense and will throw
an error.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f9a73149a4)
CentOS 8.4 vagrant image is available at https://cloud.centos.org
let's use it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c2aaa96fc7)
0990ae4109 changed the filter in
selectattr() from 'match' to 'equalto' but due to an incompatibility with
the Jinja2 version for python 2.7 on el7 we must stick to using 'match'
filter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d6745e9cd9)
using 'match' filter in that task will lead to bad behavior if I have
the following node names for instance:
- node1
- node11
- node111
with `selectattr('name', 'match', inventory_hostname)` it will match
'node1' along with 'node11' and 'node111'.
using 'equalto' filter will make sure we only match the target node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1963066
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0990ae4109)
temporary work around vagrant cloud issue which seems broken at the time
of pushing this commit.
Let's pull images from cloud.centos.org for now since vagrant cloud
hosted images return a 403 error.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9efca34ac3)
When osd nodes are collocated in the clients group (HCI context for
instance), the current logic will exclude osd nodes since they are
present in the client group.
The best fix would be to exclude clients node only when they are not
member of another group but for now, as a workaround, we can enforce
the addition of osd nodes to fix this specific case.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947695
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 664dae0564)
Enabling lvmetad in containerized deployments on el7 based OS might
cause issues.
This commit make it possible to disable this service if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955040
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It looks like the generate_group_vars_sample.sh script wasn't executed
during previous PRs that were modifying the default values.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 83a8dd5a6a)
Since we need to revert 33bfb10, this is an alternative to initial approach.
We can avoid maintaining this file since it is present in container
image. The idea is to simply get it from the image container and write
it to the host.
Fixes: #6501
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e6d8b058ba)
The pg_autoscale_mode for rgw pools introduced in 9f03a52 was wrong
and was missing a `value` keyword because `rgw_create_pools` is a
dict.
Fixes: #6516
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a670982a38)
This is a workaround for an issue in ansible.
When trying to stop/mask/disable this service in one task, the stop
didn't actually happen, the task doesn't fail but for some reason the
container is still present and running.
Then the task starting the service in the role ceph-crash fails because
it can't start the container since it's already running with the same
name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955393
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3db1ea7ec4)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 2437f14581)
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES is for both bluestore and filestore
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 41295f0ef6)
We need to filter with the OS architecture in order to fetch the right
dev repository in shaman
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8f87754b76)
Wong Hoi Sing Edison
Dimitri Savineau
Guillaume Abrioux
Boris Ranto
VasishtaShastry
Benoît Knecht
Seena Fallah