132e78df84
Allow devices to be partition instead of disks (used for some physical servers with a sigle disk for system and storage).
2014-06-26 14:19:09 +02:00
8b3f428f1f
Replaced all by the list of host groups to be able to run the playbook with non-ceph servers.
2014-06-26 09:52:06 +02:00
a608b65cdd
Merge pull request #86 from maethor/patch-1
...
Update README.md
2014-06-13 16:36:49 +02:00
0ec9298b93
Update README.md
...
Two lines are cut in the README. This patch fix this using http://www.sebastien-han.fr/blog/2014/03/03/Announcing-ceph-ansible-playbooks/ .
2014-06-13 16:30:50 +02:00
422629557d
Merge pull request #85 from kchristensen/fix-architecture-tests
...
Fix Ansible architecture tasks
2014-06-02 21:06:28 +02:00
168faef3bd
Fix Ansible architecture tasks
2014-06-02 15:00:43 -04:00
ba07e01cb1
Merge pull request #84 from leseb/fix-no-ext4
...
Since Emperor, Ceph stores xattr into levelDB thus this option is not
2014-05-20 15:14:48 +02:00
670bec24c7
Since Emperor, Ceph stores xattr into levelDB thus this option is not
...
needed anymore.
Fixes : #83
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-05-20 15:04:09 +02:00
32b9a84dcd
Merge pull request #82 from lorin/master
...
Use Vagrant's Ansible provisioner
2014-05-12 06:42:28 -07:00
92c0445989
Use Vagrant's Ansible provisioner
...
Use Vagrant's built-in support for Ansible provisioner. This eliminates the need
for a hosts file, and simplifies the ansible config file.
Renames config from .ansible.cfg to ansible.cfg since Ansible expects the file
to be called ansible.cfg and be adjacent to Vagrantfile when using the Vagrant
provisioner.
2014-05-11 19:34:37 -04:00
3b68622f9d
Merge pull request #81 from leseb/enh-testing-mode
...
Enable single host mode
2014-05-01 01:27:20 +02:00
567c0bb6ce
Enable single host mode
...
This commit introduces a new config option 'osd crush chooseleaf type'.
With the help of this option and by setting it to '0' we tell Ceph to
store all the replicas on a single host. Basically we tell CRUSH to
iterate over disk and not over host.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-05-01 01:24:20 +02:00
d6a82a6201
Merge pull request #80 from leseb/change-default-disk
...
Change the default disk numbering
2014-04-30 17:58:51 +02:00
ed52853d20
Change the default disk numbering
...
While trying to auto-provision with vagrant, new disks get /dev/sdb and
so forth. So starting from /dev/sdd doesn't make sense.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-30 17:57:10 +02:00
358b58bd4a
Merge pull request #79 from leseb/fix-rgw-email
...
Fix non-declared rgw email_address variable
2014-04-30 14:58:02 +02:00
f0b9994a03
Fix non-declared rgw email_address variable
...
Fix : #77
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-30 14:56:37 +02:00
b0d9090cc6
Merge pull request #76 from AcalephStorage/fetch-fsid
...
Removed dependency on mon[0]
2014-04-30 13:42:08 +02:00
728e80df5c
keys are now copied from the first available mon host
...
since we're now using fsid for the directory name, it should be safe to
just copy the keys from all mon hosts. Once they are copied, the rest of
the hosts will just skip copying. :)
2014-04-30 16:02:07 +08:00
48c1dcd92b
Avoid ip/fqdn weirdness & use fsid path for keys
2014-04-30 15:16:11 +08:00
b4fad6fcfc
Merge pull request #74 from guestisp/fix-73-use-ansible-fqdn-in-purge-yml
...
Fix #73 by using `ansible_fqdn`
2014-04-18 14:01:47 +02:00
95d4f4bd1a
Merge pull request #72 from guestisp/fix-71-typo-in-purge-yml
...
Fix #71 . Removed wrong `---`
2014-04-18 14:01:36 +02:00
2ccbab2c7c
Merge pull request #70 from guestisp/fix-69-mon-osd-min-down-reporters
...
Fix #69 - mon osd min down reporters
2014-04-18 14:01:22 +02:00
c26b269b5a
Fix #73 by using `ansible_fqdn`
2014-04-18 10:55:31 +02:00
34706fa613
Fix #71 . Removed wrong `---`
2014-04-18 10:52:22 +02:00
58ea349b53
Fix #69 - mon osd min down reporters
2014-04-18 10:47:30 +02:00
1d5ec9ae1e
Merge pull request #68 from leseb/purge-ceph
...
Add a purge playbook to remove Ceph
2014-04-14 15:19:03 +02:00
be7f8ab89b
Add a purge playbook to remove Ceph
...
The playbook removes packages, configuration files and ALL THE DATA from
Ceph.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-14 15:18:34 +02:00
080e2011b4
Merge pull request #67 from leseb/improve-ceph-conf
...
Improve ceph.conf
2014-04-11 14:08:52 +02:00
3c0ffd671f
Improve ceph.conf
...
Add tunables for:
* recovery
* performance
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-11 14:07:37 +02:00
74eb9eaa04
Merge pull request #66 from leseb/wip-maintenance
...
Add maintenance playbook
2014-04-09 17:53:55 +02:00
9a60f122ef
Add maintenance playbook
...
This playbook was made to automate Ceph servers maintenance
Typical use case: hardware change
By running this playbook you will set the 'noout' flag on your
cluster, which means that OSD **can't** be marked as out
of the CRUSH map, but they will be marked as down.
Basically we tell the cluster to don't move any data since
the operation won't last for too long.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-09 17:51:59 +02:00
05fdc19182
Merge pull request #65 from guestisp/add-support-for-subdomains-calls
...
Add support for subdomain calls in S3 api.
2014-04-07 13:29:17 +02:00
61ab445128
Add support for subdomain calls in S3 api. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls
2014-04-07 12:06:24 +02:00
6cadebd5c5
Merge pull request #61 from guestisp/remove-default-users-from-rgw
...
Remove RadosGW default users
2014-03-26 11:35:54 +01:00
d7195922b2
Totally removed test users creation from RGW tasks
2014-03-26 11:34:05 +01:00
d2b29bb13b
Merge pull request #62 from guestisp/fix-54-use-hostname-in-ceph-conf
...
Use ansible_hostname in RGW config inside ceph.conf
2014-03-26 11:27:32 +01:00
c2a0865464
Use ansible_hostname in RGW config inside ceph.conf
...
Fix #54
2014-03-26 11:26:18 +01:00
c7476fb375
Remove RadosGW default users
2014-03-26 11:22:37 +01:00
4aeaa9609f
Update README
2014-03-23 23:20:09 +01:00
3ae0b29adb
Merge pull request #59 from jcftang/wip-motd-mon
...
Drop a update-motd.d fragment for monitors so when the user/admin logs i...
2014-03-23 11:59:58 +01:00
c3480a588c
Drop a update-motd.d fragment for monitors so when the user/admin logs into a monitor there is a small notice for the user about the state of the ceph cluster. Works only on ubuntu for now
2014-03-22 14:57:22 +00:00
e6c162167c
Merge pull request #58 from guestisp/skip-missing-hosts-from-rgw-conf
...
Skip missing RGW hosts in ceph.conf
2014-03-20 13:42:09 +01:00
7623376203
Skip missing RGW hosts in ceph.conf
2014-03-20 12:14:43 +01:00
7339a6542f
Fix README typo
...
Fix typo
2014-03-19 19:40:42 +01:00
06368d309a
Merge pull request #57 from leseb/fix-readme
...
Highlight important facts (fsid and monitor key)
2014-03-19 19:38:04 +01:00
b202df711a
Highlight important facts (fsid and monitor key)
...
Update the README with an entry for the fsid and monitor keys. We
dediced to remove every key from the default variables.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-03-19 19:36:22 +01:00
7b164dcdcd
Merge pull request #56 from leseb/fix-rgw-key-conf
...
Fix rgw section name
2014-03-19 16:37:00 +01:00
b21174b189
Fix section name
...
All the rgw instance should share the same key so the section name
should not be changed.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-03-19 16:29:57 +01:00
57d1f855f4
Merge pull request #55 from leseb/fix-rgw-pkg
...
Remove hardcoded distro
2014-03-19 16:28:20 +01:00
6e355c0ccc
Remove hardcoded distro
...
This was a leftover from some previous tests.
Closes : #53
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-03-19 16:27:24 +01:00
Alexis Lahouze
Leseb
Guillaume Subiron
Kyle Christensen
Lorin Hochstein
Dexter John Genterone
Hunter Nield
Alessandro Corbelli
Jimmy Tang