This commit replaces the playbook used for add_osds job given
accordingly to the add-osd.yml playbook removal
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fef1cd4c4b)
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3496a0efa2)
We don't need to executed the grafana fact everytime but only during
the dashboard deployment.
Especially for ceph-grafana, ceph-prometheus and ceph-dashboard roles.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790303
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f940e695ab)
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Fixes: #4827
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fc02fc98eb)
This commit refact the condition in the loop of that task so all
potential osd ids found are well started.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790212
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 58e6bfed2d)
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 1ecb3a9352)
This commit adds a new scenario in order to test docker-to-podman.yml
migration playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit dc672e86ec)
play vars have lower precedence than role vars and `set_fact`.
We must use a `set_fact` to reset these variables.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b0c491800a)
This is needed after a change is made in systemd unit files.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1c2ec9fb40)
This commit adds a package installation task in order to install podman
during the docker-to-podman.yml migration playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d746575fd0)
There is no need to run these tasks n times from each monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c878e99589)
1. set noout and nodeep-scrub flags,
2. upgrade each OSD node, one by one, wait for active+clean pgs
3. after all osd nodes are upgraded, unset flags
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rachana Patel <racpatel@redhat.com>
(cherry picked from commit 548db78b95)
When ceph_rbd_mirror_configure is set to true we need to ensure that
the required variables aren't empty.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1760553
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4a065cebd7)
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5bd1cf40eb)
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cf8c6a3849)
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636508
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ef2cb99f73)
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ed36a11eab)
We only need to have the container_binary fact. Because we're not
gathering the facts from all nodes then the purge fails trying to get
one of the grafana fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786686
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a09d1c38bf)
There's some tasks using the new container image during the rolling
upgrade playbook that needs to execute the registry login first otherwise
the nodes won't be able to pull the container image.
Unable to find image 'xxx.io/foo/bar:latest' locally
Trying to pull repository xxx.io/foo/bar ...
/usr/bin/docker-current: Get https://xxx.io/v2/foo/bar/manifests/latest:
unauthorized
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3f344fdefe)
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1718f379)
Instead of running the ceph roles against localhost we should do it
on the first mon.
The ansible and inventory hostname of the rgw nodes could be different.
Ensure that the rgw instance to remove is present in the cluster.
Fix rgw service and directory path.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 747555dfa6)
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 86f3eeb717)
Only the ipv4 addresses from the nodes running the dashboard mgr module
were added to the trusted_ip_list configuration file on the iscsigws
nodes.
This also add the iscsi gateways with ipv6 configuration to the ceph
dashboard.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 70eba66182)
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3c31b19ab3)
411bd07d54 introduced a bug in handlers
using `handler_*_status` instead of `hostvars[item]['handler_*_status']`
causes handlers to be triggered in anycase even though
`handler_*_status` was set to `False` on a specific node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 30200802d9)
Since RHEL 8.1 we need to add the ganesha_t type to the permissive
SELinux list.
Otherwise the nfs-ganesha service won't start.
This was done on RHEL 7 previously and part of the nfs-ganesha-selinux
package on RHEL 8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786110
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d758125290)
When using fqdn in inventory, that playbook fails because of some tasks
using the result of ceph osd tree (which returns shortname) to get
some datas in hostvars[].
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1779021
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d9ca6b05b)
The grafana-server group name was hardcoded for the grafana/prometheus
firewalld tasks condition.
We should we the associated variable : grafana_server_group_name
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2c06678cde)
Instead of using multiple dashboard_enabled condition in the
configure_firewall file we could just have the condition once
and include the dedicated tasks list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f4c261ef90)
When there's no mgr group defined in the ansible inventory then the
mgrs are deployed implicitly on the mons nodes.
If the dashboard is enabled then we need to open the dashboard port on
the node that is running the ceph mgr process (mgr or mon).
The current code only allow to open that port on the mgr nodes when they
are present explicitly in the inventory but not implicitly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1783520
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4535985188)
The ceph iscsi repository was still set to dev (shaman) instead of
using the stable ceph-iscsi repository.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the ceph dashboard with iscsi gateways nodes we also need to
remove the nodes from the ceph dashboard list.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786686
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 931a842f21)
When an OSD is stopped, it leaves partitions mounted.
We must umount them before zapping them, otherwise error like "Device is
busy" will show up.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8056514134)
We only need to set `container_binary`.
Let's use `tasks_from` option.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0ae0a9ce28)
The command is delegated on the first monitor so we must use the fact
`container_binary` from this node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 77b39d235b)
that task is delegated on the first mon so we should always use the
`discovered_interpreter_python` from that node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5adb735c78)
This commit prevent from shrinking an mds node when max_mds wouldn't be
honored after that operation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2cfe5a04bf)
This commit adds the filestore to bluestore migration support in
ceph_volume module.
We must append to the executed command only the relevant options
according to what is passed in `osd_objectostore`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit aabba3baab)
This commit adds a task to ensure device mappers are well closed when
lvm batch scenario is used.
Otherwise, OSDs can't be redeployed given that devices that are rejected
by ceph-volume because they are locked.
Adding a condition `devices | default([]) | length > 0` to remove these
dm only when using lvm batch scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8e6ef818a2)
Otherwise, sometimes it can take a while for an OSD to be seen as down
and causes the `ceph osd purge` command to fail.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 51d601193e)
Do not use `--destroy` when zapping a device.
Otherwise, it destroys VGs while they are still needed to redeploy the
OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e3305e6bb6)
The zap action from ceph_volume module always implies `--destroy`.
This commit adds the destroy option support so we can ask ceph-volume to
not use `--destroy` when zapping a device.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0dcacdbed0)
This commit adds the non containerized context support to the
filestore-to-bluestore.yml infrastructure playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4833b85e04)
This commit adds a new job in order to test the
filestore-to-bluestore.yml infrastructure playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 40de34fb5e)
Guillaume Abrioux
Dimitri Savineau
Benoît Knecht