This commit makes the cephadm-adopt playbook fail if the cluster
has the `POOL_APP_NOT_ENABLED` warning raised.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2040243
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ddae06e1a2)
In the OpenStack context we let the integration tool (TripleO)
deal with repositories and packages.
This change just adds the with_pkg tag to allow TripleO skipping
both the repositories and packages installation.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit 12dd8b5df1)
The current implementation is wrong.
ceph-ansible lists all existing buckets and try to create
an export for each of them.
Instead, it's easier to create the export at the user level.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2037691
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7f517cdd22)
In order to avoid breaking changes, let's use named argument
instead of positional argument syntax in the command line
used to create rgw export.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2037691
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit aee1f06497)
When deploying the monitoring stack on a dedicated node, the directory
`/etc/ceph` has never been created. Therefore, the play for adopting the
monitoring stack fails because it can't write the minimal config file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2029697
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7ece59b41d)
When collocating osds with iscsigw daemons, cephadm bindmounts the
following:
```
-v /var/lib/ceph/6126c064-6a9e-4092-8a64-977930df0843/iscsi.rbd.ceph-ameenasuhani-4fs3bq-node5.vomtqb/configfs:/sys/kernel/config
```
this prevents cephadm-adopt playbook from running container and bindmounting `/var/lib/ceph:/var/lib/ceph:z`
since 'ro' is enough in this playbook, let's replace the ':z' option on
this bindmount with ':ro'
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2027411
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c4fdf956bd)
This is overriding those variables because the precedence at the 'block
var' level is greater than the group_vars/host_vars.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2026861
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e5ea2ece99)
The current implementation doesn't support adding hosts when using ipv6
addresses.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4f2c2af9b4)
When adding host, using ansible_facts['default_ipv4']['address'] might
not be the desired network, we shouldn't enforce the subnet with the
default route.
Let's use the public_network instead.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2006415
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2f34531304)
cephadm uses its own logrotate configuration file so ceph-ansible needs
to remove that custom file during the cephadm-adopt playbook.
Closes: #6944
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c41241244e)
The rbd mirroring is broken because cephadm doesn't bindmount /etc/ceph anymore.
It means the keyrings and ceph config file aren't available after the
migration.
The idea here is to remove the current rbd mirror peer and add it back
to the mon config store so we aren't bound to the /etc/ceph directory.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967440
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9c794aa9bc)
Configure repository for cephadm installation and use package install in both containerized and non containerized deployment
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 339212a7c6)
There are existing OpenStack scenarios where nfs is still not managed
by cephadm. For this reason sometimes is useful skip the nfs part of
the adoption playbook and leave this daemon unmanaged.
The purpose of this patch is providing a tag to enable the OpenStack
operators to skip this playbook section.
Closes: https://bugzilla.redhat.com/2009212
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit b7299f258b)
Let's add a `no_log: true` on the `cephadm registry-login` task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0a3b916ee7)
If old containers are still running, it can make tcmu-runner process
unable to open devices and there's nothing else to do than restarting
the container.
Also, as per discussion with iscsi experts, iscsi should be migrated before
OSDs. (the client should be closed before the server)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2000412
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d12efa1ab4)
Use cephadm_ssh_user to set custom user (not root) for cephadm to ssh to the hosts
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 67389d08d4)
When a node is configured with FQDN as the hostname value then the
`ceph orch host add` command will fail because the `ansible_hostname` used
by that command contains the short hostname which won't match the current
hostname (FQDN)
Instead we can use the ansible_nodename fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1997083
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2630f8d47a)
This adds ceph-*.target systemd unit files support for containerized
deployments.
This also fixes a regression introduced by PR #6719 (rgw and nfs systemd
units not getting purged)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1962748
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 09ef465f62)
The balancer status is registered during the cephadm-adopt, rolling_update
and swith2container playbooks. But it is also used in the ceph-handler role
which is included in those playbooks too.
Even if the ceph-handler tasks are skipped for rolling_update and
switch2container, the balancer_status variable is erased with the skip task
result.
play1:
register: balancer_status
play2:
register: balancer_status <-- skipped
play3:
when: (balancer_status.stdout | from_json)['active'] | bool
This leads to issue like:
The conditional check '(balancer_status.stdout | from_json)['active'] | bool'
failed. The error was: Unexpected templating type error occurred on
({% if (balancer_status.stdout | from_json)['active'] | bool %} True
{% else %} False {% endif %}): expected string or buffer.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1982054
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 386661699b)
The ceph osd pool ls detail command is a subset of the ceph osd dump
command.
$ ceph osd dump --format json|wc -c
10117
$ ceph osd pool ls detail --format json|wc -c
4740
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 06471a4b82)
In the `set osd flags` block, run the Ceph commands that gather information
from the cluster (and don't make any changes to it) even when running in check
mode.
This allows the tasks that depend on the variables set by those tasks to
succeed in check mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit d7653dca95)
When using python 2 and the task with a loop is skipped then it generates
an error.
Unexpected templating type error occurred on
({{ (pool_list.stdout | from_json)['pools'] }}): expected string or buffer
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cf6e33346e)
The PG autoscaler can disrupt the PG checks so the idea here is to
disable it and re-enable it back after the restart is done.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13036115e2)
Add any_errors_fatal: true in cephadm-adopt playbook.
We should stop the playbook execution when a task throws an error.
Otherwise it can lead to unexpected behavior.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1976179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3b804a61dd)
If multi-realms were deployed with several instances belonging to the same
realm and zone using the same port on different nodes, the service id
expected by cephadm will be the same and therefore only one service will
be deployed. We need to create a service called
`<node>.<realm>.<zone>.<port>` to be sure the service name will be unique
and well deployed on the expected node in order to preserve backward
compatibility with the rgws instances that were deployed with
ceph-ansible.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 31311b03ed)
We need to support rgw multisite deployments.
This commit makes the adoption playbook support this kind of deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fc784fc44c)
When no `[mgrs]` group is defined in the inventory, mgr daemon are
implicitly collocated with monitors.
This task currently relies on the length of the mgr group in order to
tell cephadm to deploy mgr daemons.
If there's no `[mgrs]` group defined in the inventory, it will ask
cephadm to deploy 0 mgr daemon which doesn't make sense and will throw
an error.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f9a73149a4)
ceph-ansible leaves a ceph-crash container in containerized deployment.
It means we end up with 2 ceph-crash containers running after the
migration playbook is complete.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1954614
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 22c18e82f0)
Due to a recent breaking change in ceph, this command must be modified
to add the <svc_id> parameter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1f40c12502)
When migrating from a cluster with no MDS nodes deployed,
`{{ cephfs_data_pool.name }}` doesn't exist so we need to create a pool
for storing nfs export objects.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1950403
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bb7d37fb6a)
the adoption playbook should use `radosgw_num_instances` in order to
determine how much rgw instance it should set recreate.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1943170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1ffc4df6b6)
This play doesn't nothing else than stopping/removing rgw daemons.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ee44d86072)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
This commit makes the playbook fetch the minimal current ceph
configuration and write it later on monitoring nodes so `cephadm` can
proceed with the adoption.
When a monitoring stack was deployed on a dedicated node, it means no
`ceph.conf` file was written, `cephadm` requires a `ceph.conf` in order
to adopt the daemon present on the node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1939887
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b445df0479)
There's no reason to not use the ceph_osd_flag module to set/unset osd
flags.
Also if there's no OSD nodes in the inventory then we don't need to
execute the set/unset play.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rerunning the cephadm-adopt.yml playbook the radosgw realm,
zonegroup and zone tasks will fail because the task isn't
idempotent.
Using the radosgw ansible modules solves that problem.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If the cephadm-adopt.yml fails during the first execution and some
daemons have already been adopted by cephadm then we can't rerun
the playbook because the old container won't exist anymore.
Error: no container with name or ID ceph-mon-xxx found: no such container
If the daemons are adopted then the old systemd unit doesn't exist anymore
so any call to that unit with systemd will fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918424
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of iterate over the host list for adding the node/label to the
host orchestrator configuration then we can do it parallelly.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds cephadm_adopt ansible module for replacing the command module
usage with the cephadm adopt command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Guillaume Abrioux
Francesco Pantano
Dimitri Savineau
Seena Fallah
Daniel Pivonka
Benoît Knecht
Alex Schultz