This adds ceph-*.target systemd unit files support for containerized
deployments.
This also fixes a regression introduced by PR #6719 (rgw and nfs systemd
units not getting purged)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1962748
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The balancer status is registered during the cephadm-adopt, rolling_update
and swith2container playbooks. But it is also used in the ceph-handler role
which is included in those playbooks too.
Even if the ceph-handler tasks are skipped for rolling_update and
switch2container, the balancer_status variable is erased with the skip task
result.
play1:
register: balancer_status
play2:
register: balancer_status <-- skipped
play3:
when: (balancer_status.stdout | from_json)['active'] | bool
This leads to issue like:
The conditional check '(balancer_status.stdout | from_json)['active'] | bool'
failed. The error was: Unexpected templating type error occurred on
({% if (balancer_status.stdout | from_json)['active'] | bool %} True
{% else %} False {% endif %}): expected string or buffer.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1982054
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph osd pool ls detail command is a subset of the ceph osd dump
command.
$ ceph osd dump --format json|wc -c
10117
$ ceph osd pool ls detail --format json|wc -c
4740
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In the `set osd flags` block, run the Ceph commands that gather information
from the cluster (and don't make any changes to it) even when running in check
mode.
This allows the tasks that depend on the variables set by those tasks to
succeed in check mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
When using python 2 and the task with a loop is skipped then it generates
an error.
Unexpected templating type error occurred on
({{ (pool_list.stdout | from_json)['pools'] }}): expected string or buffer
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The PG autoscaler can disrupt the PG checks so the idea here is to
disable it and re-enable it back after the restart is done.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add any_errors_fatal: true in cephadm-adopt playbook.
We should stop the playbook execution when a task throws an error.
Otherwise it can lead to unexpected behavior.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1976179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If multi-realms were deployed with several instances belonging to the same
realm and zone using the same port on different nodes, the service id
expected by cephadm will be the same and therefore only one service will
be deployed. We need to create a service called
`<node>.<realm>.<zone>.<port>` to be sure the service name will be unique
and well deployed on the expected node in order to preserve backward
compatibility with the rgws instances that were deployed with
ceph-ansible.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We need to support rgw multisite deployments.
This commit makes the adoption playbook support this kind of deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967455
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When no `[mgrs]` group is defined in the inventory, mgr daemon are
implicitly collocated with monitors.
This task currently relies on the length of the mgr group in order to
tell cephadm to deploy mgr daemons.
If there's no `[mgrs]` group defined in the inventory, it will ask
cephadm to deploy 0 mgr daemon which doesn't make sense and will throw
an error.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
ceph-ansible leaves a ceph-crash container in containerized deployment.
It means we end up with 2 ceph-crash containers running after the
migration playbook is complete.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1954614
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Due to a recent breaking change in ceph, this command must be modified
to add the <svc_id> parameter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When migrating from a cluster with no MDS nodes deployed,
`{{ cephfs_data_pool.name }}` doesn't exist so we need to create a pool
for storing nfs export objects.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1950403
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the adoption playbook should use `radosgw_num_instances` in order to
determine how much rgw instance it should set recreate.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1943170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit makes the playbook fetch the minimal current ceph
configuration and write it later on monitoring nodes so `cephadm` can
proceed with the adoption.
When a monitoring stack was deployed on a dedicated node, it means no
`ceph.conf` file was written, `cephadm` requires a `ceph.conf` in order
to adopt the daemon present on the node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1939887
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
There's no reason to not use the ceph_osd_flag module to set/unset osd
flags.
Also if there's no OSD nodes in the inventory then we don't need to
execute the set/unset play.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rerunning the cephadm-adopt.yml playbook the radosgw realm,
zonegroup and zone tasks will fail because the task isn't
idempotent.
Using the radosgw ansible modules solves that problem.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If the cephadm-adopt.yml fails during the first execution and some
daemons have already been adopted by cephadm then we can't rerun
the playbook because the old container won't exist anymore.
Error: no container with name or ID ceph-mon-xxx found: no such container
If the daemons are adopted then the old systemd unit doesn't exist anymore
so any call to that unit with systemd will fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918424
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of iterate over the host list for adding the node/label to the
host orchestrator configuration then we can do it parallelly.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds cephadm_adopt ansible module for replacing the command module
usage with the cephadm adopt command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We should always use the ceph_volume ansible module when possible.
This patch replace the ceph-volume inventory and lvm {list,zap} commands
called via the command/shell modules by the corresponding call with the
ceph_volume module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_mgr_module ansible module for replacing the command module
usage with the ceph mgr module enable/disable commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
ignore 302,303 and 505 errors
[302] Using command rather than an argument to e.g. file
[303] Using command rather than module
[505] referenced files must exist
they aren't relevant on these tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change default value of grafana-server group name.
Adding some tasks in ceph-defaults in order to keep backward
compatibility.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Set the cephadm cmd as a fact instead of rewriting the same command
over and over.
This also fix an issue when using docker as container engine because
the --docker cephadm parameter should be use before the subcommand
not after.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This is a partial revert of b38019e because we don't want to execute
the whole play on the monitor otherwise if we have some empty group
like rgws or mdss then the orchestrator commands will still be
executed.
Instead we should keep the real target group name at play level and
delegate the orchestator commands to the monitor. The whole play
will be skipped is the group is empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Print a message at the end of the playbook to inform users that they
don't have to user ceph-ansible playbooks anymore as everything else
need to be done via cephadm (day 2 operation).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When reporting the orchestrator service/daemon list at the end of the
playbook, we can use the --refresh option otherwise we could have
an outdated output.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After adopting a monitor we need to wait that monitor to join back
the quorum before moving to the next node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Like rolling_update or switch2container playbooks, we need to set/unset
some osd flags before and after the OSD daemons adoption.
This also adds a task for waiting for clean pgs at then of an OSd node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
At the end of the playbook we can show the orchestrator status like
we do with the ceph status in initial deployment.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It's better to use the --placement parameter when using ceph orch apply
commands to avoid confusion in the parameters.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
cephadm uses default value for dashboard container images which need to
be customized by ansible for upstream or downstream purpose.
This feature wasn't present when cephadm-adopt.yml has been designed.
Also set the container_image_base variable for upgrade purpose.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It looks like we can't run the ceph orch apply commands on nodes other
than monitors even if it used to work in the past.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph config assimilate-conf command requires the client.admin
keyring which isn't present on all nodes most of the time.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By default, ansible gathers facts from facter and ohai if installed on
the remote nodes, given we don't need them, let's exclude these facts
from our facts gathering
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The commit adds a new playbook for converting an existing ceph cluster
deployed by ceph-ansible to the cephadm orchestrator.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Guillaume Abrioux
Seena Fallah
Dimitri Savineau
Benoît Knecht
Alex Schultz