jewel used to create a default `rbd` pool in the default crush root
`default`, we need to have at least 1 osd to satisfy the PGs for this
created pool, otherwise the cluster will be in HEALTH_ERR state because
of `pgs stuck unclean`/`pgs stuck inactive`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Let's create a dedicated environment for these scenarios, there is no
need to deploy everything.
By the way, doing so will save some times.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Ansible 2.4 is currently end-of-life.
Ansible 2.5 will go end-of-life after Ansible 2.7 is released.
Fixes: #2901
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The group_vars/all file is not available on 'ooo-collocation' scenario,
it's making the `dev_setup.yml` failing because this path is hardcoded.
The idea here is to check if the pattern 'ooo-collocation' is present in
`change_dir` variable so we can set this path properly according to the
scenario being run.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`test_rbd_mirror_is_up()` is failing on update scenarios because it
assumes the `ceph_stable_release` is still set to the value of the
original ceph release, it means it won't enter in the right part of the
condition and fails.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
34f70428 has introduced a fix using `command` module while this could
have been achieved by using `lvol` module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must initialize `children` variable in `_get_osd_id_from_host()`,
otherwise, if for any reason the deployment has failed and result with
an osd host with no OSD registered, we won't enter in the condition,
therefore, `children` is never set and the function tries to return
something undefined.
Typical error:
```
E UnboundLocalError: local variable 'children' referenced before assignment
```
Fixes: #2860
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should test ceph-ansible against the latest ansible stable version on
master.
This commit also remove the pinning to 1.7.1 version of testinfra
because ansible 2.5 requires a newer version.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
avoid duplicating test unnecessarily just because of docker exec syntax.
Using the same logic than in the playbook with `docker_exec_cmd` allow us
to execute the same test on both containerized and non containerized environment.
The idea is to set a variable `docker_exec_cmd` with the
'docker exec <container-name>' string when containerized and
set it to '' when non containerized.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
these tests are skipped on bluestore osds scenarios.
they were going to fail anyway since they are run on mon nodes and
`devices` is defined in inventory for each osd node. It means
`num_devices * num_osd_hosts` returns `0`.
The result is that the test expects to have 0 OSDs up.
The idea here is to move these tests so they are run on OSD nodes.
Each OSD node checks their respective OSD to be UP, if an OSD has 2
devices defined in `devices` variable, it means we are checking for 2
OSD to be up on that node, if each node has all its OSD up, we can say
all OSD are up.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since ooo_collocation scenario is supposed to be the same scenario than the
one tested by OSP and they are not passing `rgw_create_pools` the test
`test_docker_rgw_tuning_pools_are_set` will fail:
```
> pools = node["vars"]["rgw_create_pools"]
E KeyError: 'rgw_create_pools'
```
skipping this test if `node["vars"]["rgw_create_pools"]` is not defined
fixes this failure.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
At the moment, a lot of tests are skipped when daemons are collocated.
Our tests consider a node belong to only 1 group while it's possible for
certain scenario it can belong to multiple groups.
Also pinning to pytest 3.6.1 so we can use `request.node.iter_markers()`
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It might happen that the list of ips/hosts in following line (ceph.conf)
- `mon initial memebers = <hosts>`
- `mon host = <ips>`
are not ordered the same way depending on deployment.
This patch makes the tests looking for each ip or hostname in respective
lines.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
adding more node in this scenario could help to have a better coverage
so we can catch more potential bugs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `latest` points to `mimic`, we need to force the test to keep the
same ceph release when testing anything else than `mimic`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we see more and more failure like `fatal: [mon0]: UNREACHABLE! => {}` in
`centos7_cluster` scenario, Since we have 30Gb RAM on hypervisors, we
can give monitors a bit more RAM. By the way, nodes on containerized cluster
testing scenario have already 1024Mb memory allocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't have the same service running on non-container for now, this
will change soon but for let's only run the test on container.
Signed-off-by: Sébastien Han <seb@redhat.com>
Let's try to avoid using dashes as testinfra needs to be able to read
the groups.
Typically, with iscsi-gws we can't add a marker for these iscsi nodes,
using an underscore fixes the issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
We test if:
* packages are installed
* services are runnning
* service units are enabled
Also fix linting issues
Signed-off-by: Sébastien Han <seb@redhat.com>
Update the inventory host for tripleo testing scenario so it's the same
parameters than in tripleo CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Functional tests are broken when testing against 'dev' release (ceph).
Adding a dummy value here will make it possible to run ceph-ansible CI
against dev ceph release.
Typical error:
```
> if request.node.get_marker("from_luminous") and ceph_release_num[ceph_stable_release] < ceph_release_num['luminous']:
E KeyError: 'dev'
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1487d93f21b609a637053f5b33cd2a4e408d00)
the expected number of mds daemon consist of number of daemons that are
'up' + number of daemons 'up:standby'.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
41b4632 has introduced a change in functionnals tests.
Since the admin keyring isn't copied on rgw nodes anymore in tests, let's use
the rgw keyring to achieve them.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The admin key must be copied on the osd nodes only when we test the
shrink scenario. Shrink relies on ceph-disk commands that require the
admin key on the node where it's being executed.
Now we only copy the key when running on the shrink-osd scenario.
Signed-off-by: Sébastien Han <seb@redhat.com>
Refact of 8704144e31
There is no need to have duplicated tasks for this. The rgw pools
creation should be delegated on a monitor node se we don't have to care
if the admin keyring is present on rgw node.
By the way, only one task is needed to create the pools, we just need to
use the `docker_exec_cmd` fact already defined in `ceph-defaults` to
achieve it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1550281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the tests, the remote epel repository is generating a lots of
errors leading to broken jobs (issue #2666)
This patch is about using a local repository instead of a random one.
To achieve that, we make a preliminary install of epel-release, remove
the metalink and enforce a baseurl to our local http mirror.
That should speed up the build process but also avoid the random errors
we face.
This patch is part of a patch series that tries to remove all possible yum failures.
Signed-off-by: Erwan Velu <erwan@redhat.com>
ceph command has to be executed from one of the monitor containers
if not admin copy present in RGWs. Task has to be delegated then.
Adds test to check proper RGW pool creation for Docker container scenarios.
Signed-off-by: Jorge Tudela <jtudelag@redhat.com>
When playing ceph-mds role, mon nodes have set a fact with the default
pg num for osd pools, we can simply default to this value for cephfs
pools (`cephfs_pools` variable).
At the moment the variable definition for `cephfs_pools` looks like:
```
cephfs_pools:
- { name: "{{ cephfs_data }}", pgs: "" }
- { name: "{{ cephfs_metadata }}", pgs: "" }
```
and we have a task in `ceph-validate` to ensure `pgs` has been set to a
valid value.
We could simply avoid this check by setting the default value of `pgs`
to `hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num']` and
let to users the possibility to override this value.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1581164
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`requirements2.5.txt` is pointing to `tests/requirements2.4.txt` while
it should point to `requirements2.4.txt` since they are in the same
directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
For a few moment we can see failures in the CI for containerized
scenarios because VMs are running out of space at some point.
The default in the images used is to have only 3Gb for root partition
which doesn't sound like a lot.
Typical error seen:
```
STDERR:
failed to register layer: Error processing tar file(exit status 1): open /usr/share/zoneinfo/Atlantic/Canary: no space left on device
```
Indeed, on the machine we can see:
```
Every 2.0s: df -h Tue May 29 17:21:13 2018
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 3.0G 3.0G 14M 100% /
```
The idea here is to expand this partition with all the available space
remaining by issuing an `lvresize` followed by an `xfs_growfs`.
```
-bash-4.2# lvresize -l +100%FREE /dev/atomicos/root
Size of logical volume atomicos/root changed from <2.93 GiB (750 extents) to 9.70 GiB (2484 extents).
Logical volume atomicos/root successfully resized.
```
```
-bash-4.2# xfs_growfs /
meta-data=/dev/mapper/atomicos-root isize=512 agcount=4, agsize=192000 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0 spinodes=0
data = bsize=4096 blocks=768000, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 768000 to 2543616
```
```
-bash-4.2# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 9.7G 1.4G 8.4G 14% /
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In the CI we can see at many times failures like following:
`Failure talking to yum: Cannot find a valid baseurl for repo:
base/7/x86_64`
It seems the fastest mirror detection is sometimes counterproductive and
leads yum to fail.
This fix has been added in the `setup.yml`.
This playbook was used until now only just before playing `testinfra`
and could be used before running ceph-ansible so we can add some
provisionning tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Erwan Velu <evelu@redhat.com>
let's move this variable in group_vars/all.yml in all testing scenarios
accordingly to this commit 1f15a81c48 so
we keep consistency between the playbook and the tests.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The NSS PKI database is needed only if radosgw_keystone_ssl
is explicitly set to true, otherwise the SSL integration is
not enabled.
It is worth noting that the PKI support was removed from Keystone
starting from the Ocata release, so some code paths should be
changed anyway.
Also, remove radosgw_keystone, which is not useful anymore.
This variable was used until fcba2c801a.
Now profiles drives the setting of rgw keystone *.
Signed-off-by: Luigi Toscano <ltoscano@redhat.com>
As of ceph 12.2.5 the type of the parameter `type` is not a name anymore but
an id, therefore an `int` is expected otherwise it will fail with the
following error
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in case of multimds we must check for the number of mds up instead of
just checking if the hostname of the node is in the fsmap.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Sébastien Han
Guillaume Abrioux
Erwan Velu
jtudelag
Luigi Toscano
Andrew Schoen