The docker commands should be based on the container_binary variable
otherwise running the playbook on a host without docker (like podman
only) will failed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1829985
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Same fix as `ceph-rgw` for `rgw_create_pools` pool names that contain Jinja
templates.
See #5348 for details.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 444b46ea24)
It is common to set templated pool names in `rgw_create_pools`, e.g.
```yaml
rgw_create_pools:
"{{ rgw_zone }}.rgw.buckets.index":
pg_num: 16
size: 3
type: replicated
```
This worked fine with Ansible 2.8, but broke in Ansible 2.9 due to a change in
the way `with_dict` works [1].
This commit replaces the use of `with_dict` with
```yaml
loop: "{{ rgw_create_pools | dict2items }}"
```
which works as intended and expands the template in the pool name.
[1]: https://docs.ansible.com/ansible/latest/porting_guides/porting_guide_2.9.html#loopsCloses#5348
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit d2b7670c7d)
When using radosgw_interface and IPv6 setup then the _radosgw_address
fact doesn't use square brackets compared to the radosgw_address and
radosgw_address_block configuration.
Closes: #5325
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ed4f23d530)
This change allows the operator to refresh the
ceph dashboard admin role on multiple ceph-ansible
executions.
In the current state the role is set only when the
user is created, and there's no way to change it if
the user exists.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1826002
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 5eb363e033)
this commit removes the task which enable application on cephfs pools.
See: https://tracker.ceph.com/issues/43761Fixes: #5278
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 86dc6f8206)
Otherwise it might try to use the system installed version of ansible
when there's one available.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d9acb5e6d)
Make all of the hosts start at 1 and not 0,
also make some minor changes in scenario 3 to
remova an inconsistency.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit bd1440f2cd)
The '==' jinja2 operator (or 'equalto') has been introduced in jinja2
2.8.
On EL7, jinja2 version is 2.7 so the operator isn't present creating
templating error like:
The error was: TemplateRuntimeError: no test named '=='
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1747206
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34e6e8e06c)
Since ea2b654d9 we're not running the rados command from the monitor
nodes but from the ganesha node. Unfortunately we don't have the
required keyring on that node to run the rados command as we don't
import the right keyring.
This commit restores the workflow for internal ganesha deployment like
before ea2b654d9 but keeps the rados commands from the ganesha node for
external deployment until we have a better design.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8a890306ad)
Fix the condition on the keyring copy task that prevent the ganesha
keyring to be created in the /var/lib/ceph directory.
Also ensure that the directory exists first.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831285
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 748ac4b928)
The condition is missing an index here which makes the playbook failing.
Typical error:
```
The conditional check 'not item.get('skipped', False)' failed. The error was: error while evaluating conditional (not item.get('skipped', False)): 'list object' has no attribute 'get'",
```
Also, adds the missing '/keyring' on the `exec_cmd_nfs` fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1831342
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cf460274c7)
15ed9ee introduced a regression for the mgr dashboard daemon using
IPv6 since the mgr dashboard configuration doesn't support brackets.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1827299
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f1728929cd)
+ Mention of this variable was missing in the original version.
+ Minor revisions around the concept of secondary zone.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit 2b32604577)
This commit mentions:
- the Debian support removal from RHCS deployment.
- site-docker.yml.sample and purge-docker-cluster.yml symlinks removal.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds CentOS 8 support for containerized deployment allowing podman
installation as the default container engine for this distribution.
Closes: #5130
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit is the first of a serie in order to describe all day-2 operations
that are possible via ceph-ansible using a set of playbook provided in
`infrastructure-playbooks` directory.
Fixes: #5061
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e800303e9)
When using skipped variables with from_json filter and python2 then we
need to have a default value otherwise the skipped task will fail.
Unexpected templating type error occurred on
({{ (ceph_volume_lvm_list.stdout | from_json) }}): expected string or
buffer
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790472
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2b9edba131)
This was removed in Ansible 2.9.
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|version_compare` use `result is version_compare`. This
feature will be removed in version 2.9. Deprecation warnings can be
disabled by setting deprecation_warnings=False in ansible.cfg.
Rename 'version_compare' to the function 'version'.
version_compose was renamed to version since ansible 2.5
Signed-off-by: abaird-rh <abaird@redhat.com>
(cherry picked from commit eb71244bfd)
This commit creates an empty rados index object even when deploying
standalone nfs-ganesha.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822328
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ea2b654d95)
We were not testing the right ansible_distribution fact value for RHEL
distribution.
This commit also updates the minial RHEL version supported by RHCS.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5de74fe512)
This commit fixes a bug when trying to scale out osd nodes with
`crush_rule_config` is enabled.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822599
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4bcc52cb2a)
Since 15ed9ee the ceph-mgr daemon binds on the IP address on the public
network instead of binding on all addresses.
This commit updates the testinfra code to reflect that change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0f0a14772c)
Unregister marks generates warnings like:
PytestUnknownMarkWarning: Unknown pytest.mark.docker - is this a typo?
You can register custom marks to avoid this warning
https://docs.pytest.org/en/latest/mark.html
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ac4f8763aa)
The dashboard SSO mgr module requires the saml python library to be
installed. This is only a valid scenario for RHCS deployment because
the saml python library isn't available in other classic repositories.
This package is present in RHCS Tools repository so we also need to
enable it on the mgr nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1820233
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 6617d90733)
Fetch the key when it is present in the cluster but not on the node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ccfa249919)
553584cbd0 introduced a regression when no
secret is passed, it overwrites the secret each time the task is run.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 003defec03)
The add-mgrs scenario is still using the testinfra command instead of
pytest so the tests exectution are failling.
ERROR: InvocationError for command could not find executable testinfra
This also adds the missing --ssh-config option to testinfra.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 92f538f1af)
We must call `ceph-osd` role from `container_options_facts.yml` because
ceph-osd-run.sh.j2 needs variables set in this file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1819681
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4a4f54f6ee)
With this change, the state `present` is enough to update a keyring.
If the keyring already exist, it will be updated if caps or secret
passed to the module are different.
If the keyring doen't exist, it will be created.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1808367
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 553584cbd0)
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1bb9860dfd)
Creating crush rules even with no crush hierarchy configuration is a
valid scenario so we shouldn't be bound to the first task result (which
configure crush hierarchy) to be able to add new crush rules.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816989
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5b0476385c)
Adding `--all` to the `systemctl list-units` command in order to get
*all* osds id on the node (including stoppped osds). Otherwise, it will
purge the cluster but there will be leftover after that.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1814542
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5e7962ccf6)
- Set default mock configuration to epel-8-x86_64, to match the
default dist value.
- Add support for alpha tags, like the recently added v5.0.0alpha1
Signed-off-by: Javier Pena <jpena@redhat.com>
(cherry picked from commit 19a43ff261)
Curently, the dist and mock configurations are hardcoded in the
Makefile to be el8 and epel-7-x86_64, respectively. This commit
allows the user to override those settings using the DIST and
MOCK_CONFIG environment variables, falling back to the current
defaults if not set.
This provides additional flexibility when building the RPM directly
from the repository.
Signed-off-by: Javier Peña <jpena@redhat.com>
(cherry picked from commit ed8341568b)
When using the lvm batch ceph-volume subcommand with dedicated devices
for bluestore (db/wal) then the list of devices is convert to a string
instead of being extended via an iterable.
This was working with only one dedicated device but starting with more
then the ceph_volume module fails.
TASK [ceph-osd : use ceph-volume lvm batch to create bluestore osds] **
fatal: [xxxxxx]: FAILED! => changed=true
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- batch
- --bluestore
- --yes
- --prepare
- --osds-per-device
- '4'
- /dev/nvme2n1
- /dev/nvme3n1
- /dev/nvme4n1
- /dev/nvme5n1
- /dev/nvme6n1
- --db-devices
- /dev/nvme0n1 /dev/nvme1n1
- --report
- --format=json
msg: non-zero return code
rc: 2
stderr: |2-
stderr: lsblk: /dev/nvme0n1 /dev/nvme1n1: not a block device
stderr: error: /dev/nvme0n1 /dev/nvme1n1: No such file or directory
stderr: Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.
usage: ceph-volume lvm batch [-h] [--db-devices [DB_DEVICES [DB_DEVICES ...]]]
[--wal-devices [WAL_DEVICES [WAL_DEVICES ...]]]
[--journal-devices [JOURNAL_DEVICES [JOURNAL_DEVICES ...]]]
[--no-auto] [--bluestore] [--filestore]
[--report] [--yes] [--format {json,pretty}]
[--dmcrypt]
[--crush-device-class CRUSH_DEVICE_CLASS]
[--no-systemd]
[--osds-per-device OSDS_PER_DEVICE]
[--block-db-size BLOCK_DB_SIZE]
[--block-wal-size BLOCK_WAL_SIZE]
[--journal-size JOURNAL_SIZE] [--prepare]
[--osd-ids [OSD_IDS [OSD_IDS ...]]]
[DEVICES [DEVICES ...]]
ceph-volume lvm batch: error: Unable to proceed with non-existing device: /dev/nvme0n1 /dev/nvme1n1
So the dedicated device list is considered as a single string.
This commit also adds the block_db_devices and wal_devices documentation
to the ceph_volume module.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1816713
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 760b6cd7b0)
The latest Ceph stable release is now Octopus so the "latest" container
image tag is pointing to Octopus and not Nautilus anymore.
This commit updates the ceph_docker_image_tag with "latest-nautilus".
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Support for debian with RHCS has been dropped starting RHCS 4
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4ac99223b2)
This is no longer true, let's remove this comment given that this option
is not ignored in containerized deployments.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e551b5ba1a)
The rgw_instances_all fact is supposed to be the list of all radosgw
instances from all rgw nodes.
But the fact is always using the local rgw_instances variable so this
won't work on multiple nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0487d21938)
In fc02fc9 the group_vars samples have been generated but only for
monitor_address variable not radosgw_address.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit b46839bad0)
Dimitri Savineau
Benoît Knecht
fmount
Guillaume Abrioux
Ali Maredia
ianwatsonrh
abaird-rh
Rishabh Dave
Javier Pena