Initially MONs and RGW binded /etc/pki/ca-trust/extracted using the :z flag
(introduced to solve an OSP TripleO issue on RHEL - #3638) but using
this flag prevents local services (like sssd) running on the host from accessing
the certificates/files in that folder.
Signed-off-by: Teoman ONAY <tonay@redhat.com>
(cherry picked from commit 7e8ce2567e)
Update `After=` and `Wants=` parameters in container systemd units
and make them be aligned with the systemd units that come
from the packaging.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2027440
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f01536ea19)
This adds ceph-*.target systemd unit files support for containerized
deployments.
This also fixes a regression introduced by PR #6719 (rgw and nfs systemd
units not getting purged)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1962748
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 09ef465f62)
sufficient for the default value (512) of rgw thread pool size.
But if its value is increased near to the pids-limit value,
it does not leave place for the other processes to spawn and run within
the container and the container crashes.
pids-limit set to unlimited regardless of the container engine.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1987041
Signed-off-by: Teoman ONAY <tonay@redhat.com>
(cherry picked from commit 9b5d97adb9)
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9758e3c513)
When calling the `ceph_key` module with `state: info`, if the ceph
command called fails, the actual error is hidden by the module which
makes it pretty difficult to troubleshoot.
The current code always states that if rc is not equal to 0 the keyring
doesn't exist.
`state: info` should always return the actual rc, stdout and stderr.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964889
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d58500ade0)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 2437f14581)
This adds a `ExecStartPre=-/usr/bin/mkdir -p /var/log/ceph` in all
systemd service templates for all ceph daemon.
This is specific to RHCS after a Leapp upgrade is done. Indeed, the
`/var/log/ceph` seems to be removed after the upgrade.
In order to work around this issue let's ensure the directory is present
before trying to start the containers with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1949489
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bab403b603)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
We already do that in the other systemd templates (mgr, mds, etc..)
and would present to add workaround in other orchestration tool.
This change is for containerized deployment only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1882724
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3749d297c7)
Due to missing condition on `cephx` variable, cephx disabled deployments
are broken.
This commit fixes this.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1910151
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4af0845702)
Since the backing generate_secret() just hands out urandom output,
running as privileged doesn't seem to be required. It's not
desireable to provide sudo in some Ansible runner environments.
Signed-off-by: Jukka Nousiainen <jukka.nousiainen@csc.fi>
(cherry picked from commit eb7473491b)
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c68b124ba8)
adding monitor is no longer possible because we generate a new mon
keyring each time the playbook is run.
Fixes: #5864
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 970c6a4ee6)
This commit changes the bind mount option for the mount point
`/var/lib/ceph` in the systemd template for mon and mgr containers. This
is needed in case of collocating mon/mgr with osds using dmcrypt
scenario.
Once mon/mgr got converted to containers, the dmcrypt layer sub mount is
still seen in `/var/lib/ceph`. For some reason it makes the
corresponding devices busy so any other container can't open/close it.
As a result, it prevents osds from starting properly.
Since it only happens on the nodes converted before the OSD play, the idea is
to bind mount `/var/lib/ceph` on mon and mgr with the `rshared` option
so once the sub mount is unmounted, it is propagated inside the
container so it doesn't see that mount point.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896392
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f5ba6d9b01)
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5ba7824c55)
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 16cd183b9c)
After rolling updates performed with
`infrastructure-playbooks/rolling_updates.yml`, files located in
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` had mode 0755 (including
the keyring), making them world-readable.
This commit separates the task that configured permissions recursively on
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` into two separate tasks:
1. Set the ownership and mode of the directory itself;
2. Recursively set ownership in the directory, but don't modify the mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 0d76826bbb)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 8f436ab5d8)
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 54ba38e35e)
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 733596582d)
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit abb4023d76)
In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 47b7c00287)
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d43769dc2a)
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd22f1d1ec)
Since ed36a11 we move the crush rules creation code from the ceph-mon to
the ceph-osd role.
To keep the backward compatibility we kept the possibility to set the
crush variables on the mons side but we didn't move the default values.
As a result, when using crush_rule_config set to true and wanted to use
the default values for crush_rules then the crush rule ansible task
creation will fail.
"msg": "'ansible.vars.hostvars.HostVarsVars object' has no attribute
'crush_rules'"
This patch move the default crush variables from ceph-mon to ceph-osd
role but also use those default values when nothing is defined on the
mons side.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1798864
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636508
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
since c09b82a80a392ccd0da7677c7b424ce5cd3fa5d6 in ceph/ceph we must call
mon_status from asok instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
[303] mktemp used in place of tempfile module
[602] Don't compare to empty string
[701] No 'galaxy_info' found
[702] Use 'galaxy_tags' rather than 'categories'
This patch also changes the ansible log_path value via the
ANSIBLE_LOG_PATH environment variable in the travis configuration to
avoid warnings.
[WARNING]: log file at /home/travis/ansible/ansible.log is not writeable
and we cannot create it, aborting
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit isolates the systemd unit files generation for containers into
separate yml files in order to be able importing each corresponding roles
without playing all tasks.
This is needed so we can run ceph-ansible to render systemd unit files
so they call podman instead of docker.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On containerized deployment, the mon container sometimes needs to
access to the radosgw endpoint (via the radosgw-admin command). When
using TLS on the radosgw with self-signed certificates then we need to
access to the CA certification from the mon container.
The CA certificate needs to be added on the host and then the directory
will be bind mount on the container.
Resolves: #4358
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
The ability to add nodes with the monitor role to an existing cluster
whose name differs from the default name is fixed.
Signed-off-by: ilyashestopalov <usr.tester@yandex.ru>
We already set the become flag to true at a play level in the site*
playbooks so we don't need to set it at a task level.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Teoman ONAY
Guillaume Abrioux
Dimitri Savineau
Benoît Knecht
Alex Schultz
Jukka Nousiainen
Mihai Plasoianu
Artur Fijalkowski
ilyashestopalov