always set these facts on monitor nodes whatever we run with `--limit`.
Otherwise, playbook will fail when using `--limit` on nodes where these
facts are used on a delegated task to monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit fixes a bug when trying to scale out osd nodes with
`crush_rule_config` is enabled.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1822599
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
It looks like that the service module doesn't support wildcard anymore
for stopping/disabling multiple services.
fatal: [rgw0]: FAILED! => changed=false
msg: 'This module does not currently support using glob patterns,
found ''*'' in service name: ceph-radosgw@*'
...ignoring
Instead we should iterate over the rgw_instances list.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This was used before the CentOS 8 requirement when using CentOS 7
atomic which has both docker and podman installed.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using different name between the inventory_hostname and the
ansible_hostname then the _container_exec_cmd fact will get a wrong
value based on the inventory_hostname instead of the ansible_hostname.
This happens when the ceph cluster is already running (update/upgrade).
Later the container exec commands will fail because the container name
is wrong.
We should always set the _container_exec_cmd based on the
ansible_hostname fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1795792
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
There's no need to define a variable via a fact if we can do it via a
default value. Using a fact could be interesseting to override the
default value on some condition.
- ceph_uid could be set to 167 by default because it's only different on
non containerized deployment on Debian/Ubuntu.
- rbd_client_directory_{owner,group,mode} could be set to ceph,ceph,0770
by default install of null as we are doing in the facts.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to executed the grafana fact everytime but only during
the dashboard deployment.
Especially for ceph-grafana, ceph-prometheus and ceph-dashboard roles.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790303
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
that task is delegated on the first mon so we should always use the
`discovered_interpreter_python` from that node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to set the use_new_ceph_iscsi fact on other nodes than
those present in the iscsigws group.
Also remove the duplicate iscsi_gw_group_name condition already present
on the include_task.
Finally validate the ansible distribution as the first task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ntp/chrony facts are only used in the ceph-infra role so we don't
really need to set them in the ceph-facts roles.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using `osd_auto_discovery`, `devices` is built multiple times due
to multiple runs of `ceph-facts` role. It end up with duplicate
instances of a same device in the list.
Using `unique` filter when building the list fixes this issue.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the way we set `ceph_uid` fact in `ceph-facts` and
removes all `set_fact` tasks for `ceph_uid` in switch-to-containers playbook
to avoid duplicated code.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the rolling_update scenario, the fsid value is retrieve from the
current ceph cluster configuration via the ceph daemon config command.
This command tries first to resolve the admin socket path via the
ceph-conf command.
Unfortunately this command won't work if you have a duplicate key in the
ceph configuration even if it only produces a warning. As a result the
task will fail.
Can't get admin socket path: unable to get conf option admin_socket for
mon.xxx: warning: line 13: 'osd_memory_target' in section 'osd' redefined
Instead of using ceph daemon we can use the --admin-daemon option
because we already know what the socket admin path value based on the
ceph cluster and mon hostname values.
Closes: #4492
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
e695efc hasn't been updated with the changes introduced in 9bb11c7 so
the ips_in_ranges filter isn't used for an external grafana instance.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
This change just adds the task to inject from the
ceph dashboard mgr module the required layouts
to show all the cluster metrics on the grafana
instance.
Since we're now able to push grafana layouts through
the ceph mgr module command, the dashboards configuration
template is no longer needed on containerized environments.
This commit also fixes the Vagrantfile IP static assigment
in the grafana section because it generates an issue (it's
the same of the mgr instance).
Finally, considering some deployments that use an external
grafana server instance, we reworked the 'grafana_server_addr'
assignment to address these requirements.
Signed-off-by: fmount <fpantano@redhat.com>
This change fixes the discovered_interpreter_python variable
name that was "discovered_python_interpreter" and caused a
failure in OSP deployments.
Signed-off-by: fmount <fpantano@redhat.com>
If the user has set the `ansible_python_interpreter`, ansible will not try to
discover python, so `discovered_python_interpreter` will not be set.
Solution: Set `discovered_python_interpreter` to `ansible_python_interpreter`
if `ansible_python_interpreter` is defined
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
There's no need to add complexity and trying to fallback on other group.
Let's deploy dashboard on all nodes present in grafana-server group.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit moves some old variables into ceph-defaults so we can move
the `use_new_ceph_iscsi` fact in ceph-facts role in order.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As the bz1721914 describes, the grafana_server_addr
fact is not defined if ip_version used is ipv6.
This commit adds the ip_version condition to set
correctly this fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1721914
Signed-off-by: fmount <fpantano@redhat.com>
If no grafana-server group is defined while an mgr group is, that task
will fail because `hostvars[groups[grafana_server_group_name][0]` can't
return anything since `groups['grafana-server']` will be a non existing
key.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since timesyncd is not available on RHEL-based OSs, change the default
to chronyd for RHEL-based OSs. Also, chronyd is chrony on Ubuntu, so
set the Ansible fact accordingly.
Fixes: https://github.com/ceph/ceph-ansible/issues/3628
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Few fixes on systemd unit templates for node_exporter and
alertmanager container parameters.
Added the ability to use a dedicated instance to deploy the
dashboard components (prometheus and grafana).
This commit also introduces the grafana_group_name variable
to refer grafana group and keep consistency with the other
groups.
During the integration with TripleO some grafana/prometheus
template variables resulted undefined. This commit adds the
ability to check if the group exist and create, accordingly,
different job groups in prometheus template.
Signed-off-by: fmount <fpantano@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
The fsid generation is done via a python command. When the ansible
controller node only have python3 available (like RHEL 8) then the
python command isn't necessarily present causing the fsid generation
to fail.
We already do some resource creation (like ceph keyring secret) with
the python command too but from the mon node so we should do the same
for fsid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1714631
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed for the ceph-dashboard implementation since it requires
to run containerized application which aren't packaged as RPMs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
running an external ceph cluster deployment with (obviously) no
monitors defined in inventory breaks with an undefined error because
`_monitor_addresses` never get defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1707460
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Adds "check_mode: no" to commands which register cluster state in a
variable and don't modify anything. These commands have to run in order
to support running the playbook in check mode.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the previous approach was wrong.
checking if `item.key` is in `osd_auto_discovery_exclude` (`['dm-',
'loop']`) is incorrect because it will obviously not match. Therefore,
the condition will return `True` whatever the device we are checking.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Dimitri Savineau
Vytenis Sabaliauskas
Harald Jensås
fmount
Johannes Kastl
Rishabh Dave
L3D
Gaudenz Steinlin
Radu Toader