Having callback_plugins, and action plugins in random locations causes
a lot of disparity.
We should centralize this into one place in the plugins directory and
fix up the ansible.cfg to reflect this.
Additionally, since the ansible.cfg already reflects action_plugins, we
don't need a link to action_plugins in the base of the repository.
According to hostname configuration, the task waiting for mons to be in
quorum might fail.
The idea here is to look for both shortname and fqdn in
`ceph_health_raw` instead of just `ansible_hostname`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1546127
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Variables set at the play level with ``vars`` do
not carry over into the next play in the playbook.
The var jewel_minor_update was set in a previous play but
used in this one and was failing because it was not defined.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1544029
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
These are better collected by ansible automatically. This would also
fail if the host_var file didn't exist.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the `zap ceph osd disks` task should iter on `resolved_parent_device`
instead of `combined_devices_list` which contain only the base device
name (vs. full path name in `combined_devices_list`).
this fixes the issue where docker complain about container name because
of illegal characters such as `/` :
```
"/usr/bin/docker-current: Error response from daemon: Invalid container
name (ceph-osd-zap-magna074-/dev/sdb1), only [a-zA-Z0-9][a-zA-Z0-9_.-]
are allowed.","See '/usr/bin/docker-current run --help'."
""
```
having the the basename of the device path is enough for the container
name.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1540137
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is a typo caused by leftover.
It was previously written like this :
`shell: echo /dev/$(lsblk -no pkname "{{ item }}") }}")`
and has been rewritten to :
`shell: $(lsblk --nodeps -no pkname "{{ item }}") }}")`
because we are appending later the '/dev/' in the next task.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1540137
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These tasks are needed only when upgrading to luminous.
They are not needed in Jewel minor upgrade and by the way, they fail because
`ceph versions` command doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When update from a minor Jewel version to another, the playbook will
fail on the task "fail if no mgr host is present in the inventory".
This now can be worked around by running Ansible with_items
-e jewel_minor_update=true
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1535382
Signed-off-by: Sébastien Han <seb@redhat.com>
Using `lsblk` to resolv the parent device is better than just removing the last
char when passing it to the zap container.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Avoid using `awk` to get the different devices from the partlabel.
Using `blkid` is more readable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we're working with a jewel cluster then this service will not exist.
This is mainly a problem with CI testing because our tests are setup to
work with both jewel and luminous, meaning that eventhough we want to
test jewel we still have a nfs-ganesha host in the test causing these
tasks to run.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The rolling update playbook was attempting to stop the
nfs-ganesha service on nodes where jewel is still installed.
The nfs-ganesha service did not exist in jewel so the task fails.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
`bluestore_purge_osd_non_container` scenario is failing because it
keeps old osd_uuid information on devices and cause the `ceph-disk activate`
to fail when trying to redeploy a new cluster after a purge.
typical error seen :
```
2017-12-13 14:29:48.021288 7f6620651d00 -1
bluestore(/var/lib/ceph/tmp/mnt.2_3gh6/block) _check_or_set_bdev_label
bdev /var/lib/ceph/tmp/mnt.2_3gh6/block fsid
770080e2-20db-450f-bc17-81b55f167982 does not match our fsid
f33efff0-2f07-4203-ad8d-8a0844d6bda0
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There is no need to ask for root on the local action. This will prompt
for a password the current user is not part of sudoers. That's
unnecessary anyways.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1516947
Signed-off-by: Sébastien Han <seb@redhat.com>
this task hangs because `{{ inventory_hostname }}` doesn't resolv to an
actual ip address.
Using `hostvars[inventory_hostname]['ansible_default_ipv4']['address']`
should fix this because it will reach the node with its actual IP
address.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
purge-docker-cluster must remove all osd_disk_prepare logs in
`{{ ceph_osd_docker_run_script_path }}`, otherwise if you purge your
cluster and try to redeploy it, osds will fail to start since because it
will try to retrieve find a partition uuid which doesn't exist.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1510470
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The ansible inventory could have more than just ceph-ansible hosts, so
we shouldnt use "hosts: all", also only grab one file when getting
the ceph cluster name instead of failing when there is more than one
file in /etc/ceph. Also fix location of the ceph.conf template
Rebooting servers is really intrusive and perhaps this is not what the
operator wants. So we disable the reboot by default now. Note that the
reboot might not happen all the time.
It can be enabled by default by running the purge playbook with -e
reboot_osd_node=True
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1505011
Signed-off-by: Sébastien Han <seb@redhat.com>
During purge osd, the containers are not stopped because of a typo, as a
result, all the devices can't be unmounted later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
stable-3.0 brought numerous changes in ceph-ansible variables, this PR
aims to maintain backward compatibility for someone running stable-2.2
upgrading to stable-3.0 but keeps its groups_vars untouched.
We will then determine the right options to make sure the upgrade works
but we are expecting that new variables should be used.
We will drop this in a near future, maybe 3.1 or 3.2.
Signed-off-by: Sébastien Han <seb@redhat.com>
nfs nodes can't be upgraded from jewel to luminous because ceph-nfs role
is skipped because of the condition `when:
"ceph_release_num[ceph_release] >= ceph_release_num.luminous"`. Indeed,
package is upgraded in `ceph-nfs` role, therefore,
`ceph_release` is still set to the old version. It means the when can't
be satisfied.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
mgr nodes can't be upgraded from jewel to luminous because ceph-mgr role
is skipped because of the condition `when:
"ceph_release_num[ceph_release] >= ceph_release_num.luminous"`. Indeed,
ceph-mgr package is upgraded in `ceph-mgr` role, therefore,
`ceph_release` is still set to the old version. It means the when can't
be satisfied.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 302e563601cd6820b1ae44fabdfb1506688c7c9b)
- Add upgrade support for rbd mirror and nfs daemons.
- Only works with systemd (remove sysvinit and upstart occurence)
- A bit of cleanup
Signed-off-by: Sébastien Han <seb@redhat.com>
This patch changes the `when:` keys so that they have no jinja2
delimiters. This avoids Ansible warnings which could turn into
errors in a future Ansible release.
Ansible throws warnings when using yum/dnf/rpm with the command
module:
[WARNING]: Consider using yum module rather than running yum
This patch adds the `warn: no` argument to suppress the warnings
in the Ansible output.
This playbook can replace failed OSD in containerized and
non-containerized env.
The current limitation is that it won't allow you to choose between
filestore/bluestore and will do collocation as well.
Signed-off-by: Sébastien Han <seb@redhat.com>
Using a condition when osd_scenario == 'non-collocated' was wrong since
these partitions can be collocated on a single device also. Removing the
check makes the purge of these partitions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1499871
Signed-off-by: Sébastien Han <seb@redhat.com>
The current inclusion of purge-iscsi-gateways.yml in purge-cluster.yml
is not working well and blocking the CI too. So removing it from
purge-cluster.yml and re-add the original purge-iscsi-gateways.yml.
Signed-off-by: Sébastien Han <seb@redhat.com>
Use the pg check before doing the pg check, not on the quorum check.
Also never quote int when doing comparaison.
Signed-off-by: Sébastien Han <seb@redhat.com>
The shell wildcard expansion of non-existing paths fails on zsh making
the whole script fail. We can use file module with with_fileglob to
alleviate the problem instead.
Signed-off-by: Boris Ranto <branto@redhat.com>
The systemd can't stop services if the unit files were removed before
the cluster was purged. We should just ignore these.
Signed-off-by: Boris Ranto <branto@redhat.com>
Andy McCrae
jtudelag
Guillaume Abrioux
Andrew Schoen
Sébastien Han
Caleb Boylan
Major Hayden
Boris Ranto