This moves some task from the `ceph-nfs` role in `ceph-common` since
some of them are needed in `ceph-rgwloadbalancer` role.
This avoids duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds all rgw ports to the http_port_t selinux type so it
allows haproxy to connect to those ports in order to avoid AVC.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
haproxy gets an AVC when configured to connect to port 8081
This commit adds a snippet regarding haproxy in a selinux environment
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
Pass the password variable via stdin for the registry login
authentication.
This allows to remove the no_log statement and see the task output
without displaying the password value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently NFS Ganesha (ceph-nfs) consumes /etc/idmapd.conf, which
controls mapping of user/owner identities under NFSv4+. With
containerized service deployment, this file is an immutable part of the
container image and cannot be modified.
Here we provide group variables, and a taskk and templates for the
ceph-nfs role, to set the path of the idmap configuration file and
to make the most common adjustment to the contents of that file --
namely to set the 'Domain'. We default the path to /etc/ganesha/idmap.conf
so that we will not conflict with /etc/idmapd.conf on the controller nodes
where ganesha runs. NFSv4 clients, as used for example by the Cinder NFS
driver, consume /etc/idmapd.conf and may require different settings than
what is wanted for NFS Ganesha. Additionally, because we already bind
/etc/ganesha from the host into the ceph-nfs container, the file NFS
Ganesha consumes will no longer be an immutable part of the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925646
Signed-off-by: Tom Barron tpb@dyncloud.net
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the parameter `--storage.tsdb.retention.time` to the
prometheus systemd unit template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1928000
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In commits 39649f0 and bf8cdad we switch from using the shaman /repos endpoint
to the /search endpoint for using the architecture filter.
In fact that filter is also available with the /repos endpoint, which requires
less ansible tasks.
This also adds back a condition remove in 5801171 on the ceph-iscsi
repository and that repository doesn't need to filter on the architecture
because the ceph-iscsi project is noarch.
Both ceph-iscsi and tcmu-runner shaman URLs were using the ceph_dev_branch
and ceph_dev_sha1 variables which doesn't make sense. Those variables are
only useful for the ceph core repository.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Playbook must fail anyway, the `rescue` block has been introduced for
unmasking the unit after the playbook has failed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the possibility to deploy the dashboard with igw nodes using
a dedicated subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1926170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
rbd-mirroring is not configured as adding peer is getting skipped.
Peer addition should not get skipped if its not added already
Closes - https://bugzilla.redhat.com/show_bug.cgi?id=1942444
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
Docs reflect that each instance of `rgw_instances`
can now take rgw_zonemaster, rgw_zonesecondary,
rgw_zonegroupmaster, rgw_multisite_proto.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
The following commit fixes a few code quality issues detected by DeepSource:
- Use literals instead of function calls to create data structure.
- Refactor unnecessary list comprehension.
- Simplify if statement.
- Refactor useless else block in the loop.
Signed-off-by: Aksh Gupta <akshgpt7@gmail.com>
As a continuation of a7f2fa73e6, this
change switches fact injection to off by default in the provided
ansible.cfg.
Signed-off-by: Alex Schultz <aschultz@redhat.com>
for some reason, `quay.io/app-sre/grafana` no longer exist.
as a workaround, all dashboard related images have been mirrored on
quay.ceph.io.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
due to recent changes in shaman, we must fetch the right repo by
filtering on the desired architecture.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The data structure seems to have been modified in ceph@master (quincy).
This commit update the test accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the data structure seems to have been modified in ceph@master (quincy).
This commit update the test accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This function makes the `ceph_volume` module be not idempotent in
containerized context because it tries to run a container and bindmount
directories that no longer exist.
In that case, the `lvs` command being executed returns something
different than `0` so we can't call `json.loads(out)['report'][0]['lv']`
since it might throw an python error.
The idea is to return `True` only if `rc` is equal to `0` and
`len(result)` is greater than `0`, which means the command matched an
LV.
Fixes: #6284
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We can end up with an arm only repo unless we are specific about the
architecture we require. Brings the deb code in line with the rpm
equivalent.
Signed-off-by: Brad Hubbard <bhubbard@redhat.com>
This commit replaces the current stale bot which seems to be broken with
the github actions/stale one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
if for some reason the playbook fails after the service was
stopped, disabled and masked and before it got restarted, enabled and
unmasked, the playbook leaves the service masked and which can make users
confused and forces them to unmask the unit manually.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1917680
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit makes the playbook fetch the minimal current ceph
configuration and write it later on monitoring nodes so `cephadm` can
proceed with the adoption.
When a monitoring stack was deployed on a dedicated node, it means no
`ceph.conf` file was written, `cephadm` requires a `ceph.conf` in order
to adopt the daemon present on the node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1939887
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
when the group `_filtered_clients` is built, the order can change from
the original `clients` group which can cause issues since we run
`ceph-container-engine` on the first client only. It means later in the
playbook we can make call to the container CLI on a node where the
container engine wasn't installed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
nfs-ganesha builds in shaman are broken.
This commit disables nfs-ganesha testing in order to unlock the CI.
This is a temporary commit intented to be reverted.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this updates the `ceph_repository_community` check in `ceph-validate`
with the right ceph release expected.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit updates the default version of nfs-ganesha to V3.5 which is the
latest version available upstream.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If the legacy name `grafana-server` is still being used when upgrading
from Nautilus to Pacific, the task that sets the fact `rolling_update`
to `true` doesn't run on the node(s) included in that group. Indeed the
play where we set this fact (`rolling_update`) only runs on the group
`monitoring_group_name | default('monitoring')`.
As a workaround, we can run earlier the task which converts the
`grafana-server` group name to `monitoring`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935554
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.
Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```
makes `num_osds` be incremented each time `ceph-config` is called.
We have to reset it in order to get the correct number of expected OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the realm pull operation to the current radosgw_realm module.
The pull operation requires the url, access/secret key variables.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
There are times where being able to skip OSD creation is useful to the
admin (see #1777 for example), and skipping the prepare_osd tag is a
way to achieve this. Document this fact.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Sometimes it's useful to be able to skip the OSD creation step when
running ceph-ansible (cf #1777). The lvm scenario has a prepare_osd
tag on the relevant play. This commit adds the same tag to the
lvm-batch scenario.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
Guillaume Abrioux
kalebskeithley
Dimitri Savineau
VasishtaShastry
Ali Maredia
Ken Dreyer
Aksh Gupta
Alex Schultz
Brad Hubbard
Benoît Knecht
Kai Stian Olstad
Matthew Vernon