after all mon are upgraded, let's reset mon_host which is used in the
rest of the playbook for setting `container_exec_cmd` so we are sure to
use the right value.
Typical error:
```
failed: [mds0 -> mon0] (item={u'path': u'/var/lib/ceph/bootstrap-mds/ceph.keyring', u'name': u'client.bootstrap-mds', u'copy_key': True}) => changed=true
ansible_loop_var: item
cmd:
- docker
- exec
- ceph-mon-mon2
- ceph
- --cluster
- ceph
- auth
- get
- client.bootstrap-mds
delta: '0:00:00.016294'
end: '2019-09-27 13:54:58.828835'
item:
copy_key: true
name: client.bootstrap-mds
path: /var/lib/ceph/bootstrap-mds/ceph.keyring
msg: non-zero return code
rc: 1
start: '2019-09-27 13:54:58.812541'
stderr: 'Error response from daemon: No such container: ceph-mon-mon2'
stderr_lines: <omitted>
stdout: ''
stdout_lines: <omitted>
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d84160a170)
This change implements a filter_plugin that is used in the
ceph-facts, ceph-validate roles and infrastucture-playbooks.
The new filter plugin will return a list of all IP address
that reside in any one of the given IP ranges. The new filter
replaces the use of the ipaddr filter.
ceph.conf already support a comma separated list of CIDRs
for the public_network and cluster_network options.
Changes: [1] and [2] introduced a regression in ceph-ansible
where public_network can no longer be a comma separated list
of cidrs.
With this change a comma separated list of subnet CIDRs can
also be used for monitor_address_block and radosgw_address_block.
[1] commit: d67230b2a2
[2] commit: 20e4852888
Related-To: https://bugs.launchpad.net/tripleo/+bug/1840030
Related-To: https://bugzilla.redhat.com/show_bug.cgi?id=1740283Closes: #4333
Please backport to stable-4.0
Signed-off-by: Harald Jensås <hjensas@redhat.com>
(cherry picked from commit e695efcaf7)
The rolling_update.yml playbook fails when scanning ceph-disk osds while
deploying nautilus. The --force flag is required to scan existing osds
and rewrite their json metadata.
Signed-off-by: Sam Choraria <sam.choraria@bbc.co.uk>
(cherry picked from commit 7cc9f93680)
This playbook helps to migrate all osds on a node from filestore to
bluestore backend.
Note that *ALL* osd on the specified osd nodes will be shrinked and
redeployed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3f9ccdaa8a)
the confirmation play's name should confirm removing rgw instead of
monitor
Signed-off-by: Mehdy Khoshnoody <mehdy.khoshnoody@gmail.com>
(cherry picked from commit 9fa98d79fd)
If we're looking at the mon hostname in the ceph status output then
there's some scenarios where this could be true.
If we collocate some services (mons, mgrs, etc..) then the hostname of
the monitor to shrink will still be present in the ceph status (like
in mgrs or other).
Instead we should check the hostame only in the mon part of the output.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 734c0dc310)
By changing the set ownership command from using the file module in combination with a with_items loop to a raw chown command, we can achieve a 98% performance increase here.
On a ceph cluster with a significant amount of directories and files in /var/lib/ceph, the file module has to run checks on ownership of all those directories and files to determine whether a change is needed.
In this case, we just want to explicitly set the ownership of all these directories and files to the ceph_uid
Added context note to all set proper ownership tasks
Signed-off-by: Kevin Jones <kevinjones@redhat.com>
(cherry picked from commit 47bf47c9d8)
use `from_json` filter instead of a `| python` so we can get rid of the
`shell` module usage here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5573f17e76)
in order to use the right binary name when using python cli in command
or shell module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13815ad3ca)
We don't need to execute the ceph-dashboard role on the nodes present
in the grafana-server group. This one is dedicated to the grafana and
prometheus stack.
The ceph-dashboard needs to executed where the ceph-mgr is running. It
is either on the dedicated mgr nodes or if mgr and mon are collocated
implicitly on the mon nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 16939eff9e)
Add a playbook named shrink-rgw.yml to infrastructure-playbooks/ that
can remove a RGW from a node in an already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 632a44bdf2)
Use facility built-in in Ansible to check whether a command was executed
successfully rather looking at its return value.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 5aecdd3ba6)
There's no need to add complexity and trying to fallback on other group.
Let's deploy dashboard on all nodes present in grafana-server group.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d67230b2a2)
Move dashboard, grafana/prometheus and node-exporter plays into a
dedicated playbook in infrastructure-playbook directory.
To avoid using 'dashboard_enabled | bool' condition multiple time
in the main playbook we can just import the dashboard playbook or
not.
This patch also allows to use an unique dashboard playbook for
both baremetal and container playbooks.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 43135840b1)
Some NBSP are still present in the yaml files.
Adding a test in travis CI.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 07c6695d16)
This commits adds a check to ensure the daemon has been removed from the
cluster.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 916dc1f52f)
Add a playbook named "shrink-rbdmirror.yml" in infrastructure-playbooks/
that removes a RBD Mirror from a node in an already deployed Ceph
cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit c4824acb19)
Add a playbook, named "shrink-mgr.yml", in infrastructure-playbooks/
that removes a MGR from a node in an already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit f4ea75051b)
This commit refacts the way we check the "mds_to_kill" node is well
stopped.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 7df62fde34)
Add a playbook, named "shrink-mds.yml", in infrastructure-playbooks/
that removes a MDS from a node in an already deployed Ceph cluster.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 235b1fccc6)
The ceph-iscsi-config and ceph-iscsi-cli packages were combined into
ceph-iscsi and its APIs changed. This fixes up the iscsi purge task to
support the new API and old one.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit b163206db7)
This tries to first unmount any cephfs/nfs-ganesha mount point on client
nodes, then unmap any mapped rbd devices and finally it tries to remove
ceph kernel modules.
If it fails it means some resources are still busy and should be cleaned
manually before continuing to purge the cluster.
This is done early in the playbook so the cluster stays untouched until
everything is ready for that operation, otherwise if you try to redeploy
a cluster it could end up by getting confused by leftover from previous
deployment.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1337915
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 20e4852888)
3a100cfa52 introduced a check which is a
bit too restrictive, let's accept HEALTH_OK and HEALTH_WARN.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6dce51183b)
The ceph restapi configuration was only available until Luminous
release so we don't need those leftovers for nautilus+.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit da8b7ab7fb)
starting an upgrade if the cluster isn't HEALTH_OK isn't a good idea.
Let's check for the cluster status before trying to upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3a100cfa52)
Otherwise it fails like following:
```
fatal: [mon0]: FAILED! => changed=false
msg: |-
Unable to enable service ceph-mgr@mon0: Failed to execute operation: Cannot send after transport endpoint shutdown
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 51b2813e04)
The ceph-agent role was used only for RHCS 2 (jewel) so it's not
usefull anymore.
The current code will fail on CentOS distribution because the rhscon
package is only avaible on Red Hat with the RHCS 2 repository and
this ceph release is supported on stable-3.0 branch.
Resolves: #4020
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7503098ca0)
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
(cherry picked from commit ab54fe20ec)
We currently only purge rh_storage yum repository file but depending
on the ceph_repository value we are using, the ceph repository file
could have a different name.
Resolves: #4056
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 44c63903ca)
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 55420d6253)
Because we don't manage the docker service on atomic (yet) via the
ceph-container-common role then we can't stop docker dans remove
the data.
For now let's do that only for non atomic hosts.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 638604929b)
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e74d80e72f)
We were failing when that variable is unset; purge-cluster.yml contains
this workaround.
Signed-off-by: Zack Cerza <zack@redhat.com>
(cherry picked from commit 9b4339a2ba)
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2f141a6e80)
We never clean the content of /var/lib/docker so we can still have
some data present in this directory after run the purge playbook.
Pip isn't used anymore.
Also update the docker package name (especially the python binding
one).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 168d7cd016)
The shell module doesn't have a stdout_lines attributes. Instead of
using the shell module, we can use the find modules.
Also adding `become: false` to the local tmp directory creation
otherwise we won't have enough right to fetch the files into this
directory.
Resolves: #3966
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ea1f8f551c)
We must stop tcmu-runner after the other rbd-target-* services
because they may need to interact with tcmu-runner during shutdown.
There is also a bug in some kernels where IO can get stuck in the
kernel and by stopping rbd-target-* first we can make sure all IO is
flushed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1659611
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit d7ef12910e)
We don't need infrastructure-playbooks/rgw-standalone.yml since
site.yml.sample and site-cotainer.yml.sample can add a new RGW node to
an already deployed Ceph cluster.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 6e8fb2b3ea)
Keywords requiring only one item shouldn't express it by creating a
list with single item.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 739a662c80)
Conflicts:
roles/ceph-mon/tasks/ceph_keys.yml
roles/ceph-validate/tasks/check_devices.yml
Currently only rbd-target-gw service is restarted during an update.
We also need to restart tcmu-runner and rbd-target-api services
during the ceph iscsi upgrade.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1659611
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f1048627ea)
We do this so that the ceph-config role can most accurately
report the number of osds for the generation of the ceph.conf
file.
We don't want to use ceph-volume to determine the number of
osds because in an upgrade to nautilus ceph-volume won't be able to
accurately count osds created by ceph-disk.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 67453853ff)
When upgrading to nautlius run ``ceph-volume simple scan`` and
``ceph-volume simple activate --all`` to migrate any running
ceph-disk osds to ceph-volume.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1656460
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 28c47e4d1b)
These tasks must be run from a monitor which is upgraded otherwise it
might fail.
See: https://tracker.ceph.com/issues/39355
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7eb42c9e8e)
Guillaume Abrioux
Harald Jensås
Sam Choraria
Mehdy
Dimitri Savineau
Kevin Jones
Rishabh Dave
Mike Christie
L3D
guihecheng
Zack Cerza
Boris Ranto
wumingqiao
letterwuyu
Andrew Schoen