On containerized deployment, the OSD entrypoint runs some ceph-volume
commands (lvm/simple scan and/or activate) which perform badly without
the ulimit option.
This option was added for all previous ceph-volume commands but not on
the ceph-osd container startup.
Also updating hard limit value to 4096 to reflect default baremetal
value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 9a4ac46d19)
The "run 'ceph-volume lvm batch --report' to see how many osds are to be
created" and "run 'ceph-volume lvm list' to see how many osds have already been
created" statements only register the lvm_batch_report and lvm_list variables.
Running those ceph-volume commands should never produce a change on the system.
Adding changed_when: false prevents irrelevant change messages from Ansible.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
(cherry picked from commit e11cbbbcb1)
This commit fixes a typo in roles/ceph-facts/tasks/facts.yml
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit e1b9312084)
roles/ceph-validate/tasks/check_nfs.yml: fail on openSUSE Leap
using `ceph_origin = distro`, as the ganesha packages are not available from
the distribution repositories
Fixes: #4342
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit 11aa5dbb58)
Otherwise rgw handler ends up with an error when using https.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9329bbb3af)
install packages on SUSE/openSUSE distributions, using the
same logic as on RedHat-based distributions
Fixes#4340
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit c721cb99cb)
roles/ceph-common/tasks/installs/install_on_suse.yml: remove the task that
installs the dependencies, as this is done later in install_suse_packages.yml
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit 504017d562)
This commits adds the `osd blacklist` cap on all OSP clients keyrings.
Fixes: #2296
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2d955757ee)
openSUSE switched from 'openSUSE 13.x' to 'openSUSE Leap 42.x' and then to
'openSUSE Leap 15.x' to align with SLES15 development.
The previous logic did not correctly allow the current release, as 15.x matched
the 'less than 42.3' condition.
For now only support openSUSE Leap 15.x, and extend support once 16.x is
released (or whatever the exact version will be)
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
(cherry picked from commit 5ee3d96fb4)
just like `ceph_osd_pool_default_size`, a pool size might change after an
initial deployment. Having this condition prevents from customizing the
pool in that case.
This is not needed so let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70cf2a5846)
there is no need to use `shell` in these tasks. Let's use `command`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4df92152c0)
let's use `until` instead of doing test in bash using python oneliner
also, use `command` instead of `shell`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 687087fd43)
in order to use the right binary name when using python cli in command
or shell module.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13815ad3ca)
There's no need to use `shell` module here.
Instead of using `| python -c`, let's use `from_json` filter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5b9b841108)
When configuring grafana/prometheus embed in the mgr/dashboard, we need
to use the address of the grafana-server node and not the current
hostname because mgr/dashboard and grafana/prometheus could be present
on different hosts.
We should instead rely on the grafana_server_addr variable and remove
the dashboard_url.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4c6ec1dccb)
Because we need to execute commands from a monitor node (the first one
in the mons list) we are using delegate_to option.
If there's multiple nodes running the ceph-dashboard role then the
delegated task will be executed multiple times.
Also remove a mgr config-key option not present for nautilus+ releases.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f545b5be0d)
We don't have a reason to not apply firewall rules on the host when
using a containerized deployment.
The TripleO environments already manage the ceph firewall rules outside
ceph-ansible and set the configure_firewall variable to false.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1733251
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 771f25b1f8)
We don't need to create a grafana system user (in fact we even don't
set the righ uid to this user) because we're using a container setup.
Instead we just need to be sure to set the owner/group to 472 (grafana
user/group from the container) like we do for ceph/167.
We don't need to set the user/group recursively on /etc/grafana
directory in a dedicated task.
Also on Ubuntu system, the ceph-grafana-dashboards isn't present so on
non containerized deployment we won't have the
/etc/grafana/dashboards/ceph-dashboard directory present (coming with
the package) so we need to be sure it exists.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 34036c667c)
When creating OpenStack pools, we only check if the return code from
the pool list command isn't 0 (ie: if it doesn't exist). In that case,
the return code will be 2. That's why the next condition is rc != 0 for
the pool creation.
But in containerized deployment, the return code could be different if
there's a failure on the container engine command (like container not
running). In that case, the return code could but either 1 (docker) or
125 (podman) so we should fail at this point and not in the next tasks.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1732157
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d549fffdd2)
this commit adds two checks:
- check that the `[grafana-server]` group is defined
- check that the `[grafana-server]` contains at least one node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 02beb00916)
this tasks isn't using the right container_exec_cmd, that's delegating
to the wrong node.
Let's use the right fact to fix this command.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ec33ee7574)
According to this comment [1], this seems to be needed to detect wifi
devices.
In node exporter we can see this:
```
--collector.wifi Enable the wifi collector (default: disabled).
```
since it's enabled by default and we don't even change this in our
systemd templates for node-exporter, we can easily assume in the end
it's not needed. Therefore, let's remove this.
[1] dbf81b6b5b (diff-961545214e21efed3b84a9e178927a08L21-L23)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b9cdf341be)
There's no need to add complexity and trying to fallback on other group.
Let's deploy dashboard on all nodes present in grafana-server group.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d67230b2a2)
Some NBSP are still present in the yaml files.
Adding a test in travis CI.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 07c6695d16)
Those 2 directories should be renamed to be more generic (docker vs.
podman).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19950b5170)
This commit adds a when clause to avoid the setup of grafana
provisioners in a fully containerized scenario.
This is needed when the ceph-grafana-dashboards package is not
installed and this task could result in a wrong grafana
configuration that let the container crash.
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit fac1b030cb)
The dashboard rgw frontend options only need to be applied when there's
some nodes present in the rgw ansible group.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5383c2f7f3)
The current port value for alertmanager, grafana, node-exporter and
prometheus is hardcoded in the roles so it's not possible to change the
port binding of those services.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 8ab9b719fa)
Previously cephfs_pools items used to have a pgs: key but not
pgp_num: nor pg_num:
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
(cherry picked from commit edd1420217)
fbf4ed42ae introduced a bug when
container binary is podman.
podman doesn't support ps -f using regular expression, the container id
is never set in the restart script causing the handler to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1721536
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 618dbf271d)
ceph-volume will complain if gpt headers are found on devices.
This commit checks whether a gpt header is present on devices passed in
`devices` variable and fail early.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1730541
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 487d701685)
Both ntp and chrony daemon use variable for the service name because it
could be different depending on the GNU/Linux distribution.
This has been update in 9d88d3199 for chrony but only for the start part
not for the handler.
The commit fixes this for both ntp and chrony.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 0ae0193144)
The Prometheus porrt 9090 isn't open in the firewall configuration.
Also the dashboard task on the grafana node was not required because
it's already present on the mgr node.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 41b44dde85)
since everything is already in a block with the same condition, it's not
needed to leave all of them on these tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ee29f7370a)
The message prints the whole content of the registered variable in the
playbook, this is not needed and makes the message pretty unclear and
unreadable.
```
"msg": "{'_ansible_parsed': True, 'changed': False, '_ansible_no_log': False, u'err': u'Error: Could not stat device /dev/sdf - No such file or directory.\\n', 'item': u'/dev/sdf', '_ansible_item_result': True, u'failed': False, '_ansible_item_label': u'/dev/sdf', u'msg': u\"Error while getting device information with parted script: '/sbin/parted -s -m /dev/sdf -- unit 'MiB' print'\", u'rc': 1, u'invocation': {u'module_args': {u'part_start': u'0%', u'part_end': u'100%', u'name': None, u'align': u'optimal', u'number': None, u'label': u'msdos', u'state': u'info', u'part_type': u'primary', u'flags': None, u'device': u'/dev/sdf', u'unit': u'MiB'}}, 'failed_when_result': False, '_ansible_ignore_errors': None, u'out': u''} is not a block special file!"
```
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1719023
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e6dc3ebd8c)
We are currently using incorrect dashboard default port. The upstream
uses 8443 instead of 8234 by default. This should get us closer to the
upstream project.
Signed-off-by: Boris Ranto <branto@redhat.com>
(cherry picked from commit 21758fcee8)
Some dashboard_rgw_api_* variables are using the bool filter but those
variables are strings with an empty string as default value.
So we should test the variable against an empty string instead of a
bool.
dashboard_rgw_api_host: ''
dashboard_rgw_api_port: ''
dashboard_rgw_api_scheme: ''
dashboard_rgw_api_admin_resource: ''
Resolves: #4179
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5413274412)
- Remove gateway_keyring from the configuration file because it's
not used in ceph-iscsi 3.x release.
- Use config_template instead of template module for iscsi-gateway
configuration file. Because the file is an ini file and we might want
to override more parameters than those present in ceph-ansible.
- Because we can now set the pool name in the configuration, we should
use a variable for that. This is refact with the iscsi_pool_* variables
also used to configure the pool size.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 1f2a4f1910)
c90f605b5 introduces the default ceph cluster name value in the rgw
socket path for the rgw restart script. But this should use the
`cluster` variable instead.
This commit also fixes this in the osd restart script.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit de7f948b75)
The ability to add nodes with the monitor role to an existing cluster
whose name differs from the default name is fixed.
Signed-off-by: ilyashestopalov <usr.tester@yandex.ru>
(cherry picked from commit 904532c5e2)
According to the OSP pattern, we need the package-install tag
to control what is installed on the host. This commit just add
the missing tag to meet the TripleO requirements.
See: /issues/4197 for details
Fixes: #4197
Signed-off-by: fmount <fpantano@redhat.com>
(cherry picked from commit 95bd002b35)
On containerized deployment we need to bind mount the ceph-iscsi
directory to avoid writing the logs in the container.
The /var/log/ceph directory isn't use by rbd-targe-api/gw services
because they have their own log directories.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 91bef94b6c)
This commit moves some old variables into ceph-defaults so we can move
the `use_new_ceph_iscsi` fact in ceph-facts role in order.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a781ce881c)
If the user is still using the older packages and does not setup
the target iqn you will just get a vague error message later on.
This adds a check during the validate task, so it is clear to the
user.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit 08a6d10c32)
Update iscsigws.yml.sample to document that we cannot use ansible to
setup iSCSI objects and use the new ceph-iscsi package.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit 75fee55d19)
This adds support for the ceph-iscsi package during install. ceph-iscsi
does not support setting up targets/gws, luns and clients with the
current library/igw_* code. Going forward those tasks should be done with
gwcli or dashboard. ceph-iscsi will only be used if the user has no iscsi
objects setup so we do not break existing setups.
The next patch will update the iscsigws.yml.sample to document that
users must not setup any iscsi object if they want to use the new
package and tools.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit cbe66cec52)
The gateway_ip_list is not used in container setups, so drop it
for that case.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit b7b2213be1)
Dimitri Savineau
Kevin Coakley
Johannes Kastl
Guillaume Abrioux
fmount
Giulio Fidente
Boris Ranto
ilyashestopalov
Mike Christie