If using another method to generate a consistent fsid, then we can
skip creation of an (unused) cluster UUID file. If cephx is disabled
as well, we can skip creation of the fetch directory entirely.
The firewall checks can fail for any number of reasons -- e.g., the
ceph cluster hostnames are unresolvable from the ansible host, or the
ports are filtered by some intermediate hop, etc. Make two changes to
make those checks better:
* Set pipefail when running the checks, so if nmap itself fails the
command will be marked as 'failed'. Specifically, this fixes the
case where the hostnames cannot be resolved.
* Add a new variable, check_firewall, which can be used to disable
checks entirely. Specifically, this fixes the case where some
intermediate firewall filters the ports, so nmap returns "filtered".
Installs on RHEL with ceph_origin set to distro previously would fail
because no packages would get installed, but all of the checks passed
fine. This adds support for ceph_origin: distro, simply installing the
packages using yum/dnf and assuming that the sysadmin has provided a
repository containing them.
This also supports the use case where Satellite or a similar local
mirror is in use, and the admin does not or cannot use the additional
repositories the role would otherwise add.
In our use case we might only be configuring mons and not osds in the
same call, so we don't want to check variables needed for osds when they
are not needed to configure a mon.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Currently deploying a MON fails with "bad symbolic permission for mode"
errors due to the file/directory modes not being interpreted as octal
values. This commit updates roles/ceph-common/tasks/main.yml to set
the file/directory modes to strings so they can be interpreted
correctly.
Closes issue #525
At the moment, all the tasks using the file module are duplicated to have differents ownerships depending on the fact `is_ceph_infernalis`.
The goal of this commit is to have a new logic for this:
- First set facts depending on the `is_ceph_infernalis` fact
- Create the files or directories using the setted facts as ownerships.
We have a requirement to install the packages first without
configuration. These tags should allow us to target the tasks need to do
that.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
as reported in #510 some systems don't have uuidgen installed so we
better use a more global way to generate it. It sounds like python
should be available in case uuidgen is not.
Otherwise we will have to find another way :)
closes#510
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, all the ceph package installation resources use
"state=latest", which means subsequent runs of the ceph playbooks
could result in ceph being upgraded if there are package updates
available in the selected repo.
This commit adds a new variable to ceph-common called
'upgrade_ceph_packages' which defaults to False. This variable is used
in the package installation resources for ceph packages to determine if
the resource should use "state=present" or "state=latest". If the
variable gets set to True, "state=latest" will be used.
Additionally, we update rolling_update.yml to override
upgrade_ceph_packages to true to permit package upgrades in this
context specifically.
Closes issue #506
This change allows for configurable Ceph Conf Directory permissions. This
is required for integrators of Ceph, like OpenStack Cinder, which needs to
read from /etc/ceph for operation.
Use command module instead of shell since we do not do anything fancy
here. Remove the duplicate register.
Signed-off-by: Sébastien Han <seb@redhat.com>
As raised in #466 it is important in order to avoid unnecessary
troubleshooting to check that ceph ports are allowed on the platform.
The check runs a nmap command from the host running Ansible
to all the ceph nodes with their respective ports.
Signed-off-by: Sébastien Han <seb@redhat.com>
Thanks to @cloudnull great patch at
https://github.com/ansible/ansible/pull/12555
we now have the ability to add more configuration options instead of
having to push a PR to add a new option to the template. So you can
dynamically add and remove flags.
To use it, edit `ceph_conf_overrides` in `group_vars/all` like so:
```
ceph_conf_overrides
global:
foo: 12345
bar: 6789
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Currently, the fetch directory is created in your working directory
(where ansible is run from). We prefer to not keep any state in this
directory and would prefer to have the fetch directory configurable so
we can store it outside of our code checkout.
This commit creates a new variable in each role called
`fetch_directory` (defaulting to the previous value of 'fetch/'), and
then updates each reference to 'fetch' to use the new variable instead.
Closes issue #383
When multiple monitor hosts attempt to create the fetch directory there
is the potential for the task to fail with:
"OSError: [Errno 17] File exists: 'fetch'"
This appear to be an issue with the file module trying to create the
same directory at the same time when the tasks has been delegated to a
single host.
This commit enables run_once on the affected task which should address
the issue.
Fix back the rolling update playbook.
However every single time the playbook will run it will check for new
packages and install the latest ones. I don't think this is always the
desired behaviour. We need to find a way to conciliate both...
Signed-off-by: Sébastien Han <seb@redhat.com>
Fix the logic for the mandatory devices check so that it applies to
raw_multi_journal and journal_collocation scenarios separately.
This fails otherwise because whichever var is "first" in the or is most
likely undefined.
Cool stuff :). We don't need to specify an initial monitor key anymore.
A key will automatically be generated.
The default key can always be overriden with the `monitor_secret`
variable.
Signed-off-by: leseb <seb@redhat.com>
While re-running the playbook we do not want to check for new packages.
We shouldn't perform upgrades, we leave this to the operators.
Signed-off-by: leseb <seb@redhat.com>
Feel so bad about this one...
Now it's fixed, the rgw section will be activated once the rgws hosts
are part of the inventory.
Signed-off-by: leseb <seb@redhat.com>
Even if the subcription command is indempotent it takes around 15/16sec
to get it done. Where with the simple yum check we lower down this to
3sec.
Signed-off-by: leseb <seb@redhat.com>
Since the command is indempotent we don't need to check if the repo is
enabled as it will likely take twice the time.
Signed-off-by: leseb <seb@redhat.com>
Now we don't need to activate the services through a variable. If the
role is activated in the inventory, actions will occur automatically.
Fixing the repo creation for red hat storage too.
Signed-off-by: leseb <seb@redhat.com>
The new product version has jsut came out. ICE doesn't exist anymore and
Red Hat Storage is the name of the new product.
Signed-off-by: leseb <seb@redhat.com>
This branch has been sitting on my local repo for a while. I guess I had
time to spend on a plane :).
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
* fix the Vagrantfile ruby check
* fix the variable positions
Bring more mandatory variables and try to separate Vagrant vars from the
playbook vars.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Without this plugin if a Ceph version is present in a repo (let's say
epel) it will install the epel version and not the ICE version.
We install yum-plugin-priorities.noarch to honor the 'priority=1' flag.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
In storage world it's often recommended to disable transparent hugepages
as they will tend to lower performance.
Note that this change won't survive reboot. There are several ways to
disable this permanently such as:
* rc.local
* grub boot line
It's a bit tricky to do this in Ansible since it really depends on the
OS you're running on.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Depending on the OS you are runnning on you should be able to configure
these values.
Re-ordering file for clarity as well.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
With the appropriate subscription details you will be able to use the
Inktank Ceph Enterprise version of Ceph running on RHEL7.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
It has becomes really anoying to manually generate an fsid prior to the
inital bootstrap. This commit introduces a method that auto-generates an
fsid. If for whatever reasons you want to force your own fsid you can
simply edit these 3 files and override the fsid variable:
- roles/ceph-common/vars/main.yml
- roles/ceph-mon/vars/main.yml
- roles/ceph-osd/vars/main.yml
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
While running big boxes with 72 disks it's easy to get out of PID for
all the threads needed by Ceph. Increasing the default value removes
this limitation.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This commits introduces the support of the developpement branches of
Ceph. You can now install Ceph from master.
The behavior is done through 2 new options:
* ceph_stable: true will use the stable branch
* ceph_dev: true will use the dev branch
For the dev packages don't forget to set the branch that you want to
use.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Prior to this patch, the first match was winning and the playbook wasn't
doing any difference both "restart ceph", adding a distro filtrer fixes
this.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
It has been reported a couple of months ago by Dan van der Ster from
CERN that updatedb was consumming 100% of CPU while parsing system's
directories. Indeed the process was parsing the OSD PG directories that
might contains billions of objects.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
After a change is made on the configuration file we must restart the
Ceph services. I also added a check that verifies if a socker exists
because during the first play there are no services running. We check if
a socket exists, if not we don't try to restart the services, if it
exists we can restart them.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
I added a 'ceph-' prefix to all the roles related to Ceph. Since we are
about to push the roles into the Ansible Galaxy that will be easier when
we want to use these roles into a larger environement with other roles.
Fixes: #94
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
Leseb
Chris St. Pierre
Ben England
Andrew Schoen
Niklas Haas
Matt Thompson
Guillaume Abrioux
Byron McCollum
Logan V
crcceph
Eike Frost
Huamin Chen
Emilien Mantel
Michael Sambol
Abhishek Varshney
Timo Beckers
git-harry
Andy McCrae
Michael Sambol
Andrew F. Ly
Sébastien Han
Yin Jifeng
Boris Manojlovic
Matthew Rees
jjoos
Ramón Cahenzli
Alexis Lahouze
eltom