When configuring openstack, the created keyrings aren't copied over to
all monitors nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1588093
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since the openstack_config.yml has been moved to `ceph-osd` we must move
this `set_fact` in ceph-osd otherwise the tasks in
`openstack_config.yml` using `openstack_keys` will actually use the
defaults value from `ceph-defaults`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1585139
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is a follow up on #2628.
Even with the openstack pools creation moved later in the playbook,
there is still an issue because OSDs are not all UP when trying to
create pools.
Adding a task which checks for all OSDs to be UP with a `retries/until`
condition should definitively fix this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in `ceph-osd` there is no need to set `docker_exec_cmd` since the only
place where this fact is used is in `openstack_config.yml` which
delegate all docker command to a monitor node. It means we need the
`docker_exec_cmd` fact that has been set referring to `ceph-mon-*`
containers, this fact is already set earlier in `ceph-defaults`.
By the way, when collocating an OSD with a MON it fails because the container
`ceph-osd-{{ ansible_hostname }}` doesn't exist.
Removing this task will allow to collocate an OSD with a MON.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1584179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move cephfs pools creation in `ceph-mds` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The LVM lvcreate fails if the disk already has a GPT header.
We create GPT header regardless of OSD scenario. The fix is to
skip header creation for lvm scenario.
fixes: https://github.com/ceph/ceph-ansible/issues/2592
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
The order of fs.aio-max-nr (which is hard-coded to 1048576) means that
if you set fs.aio-max-nr in os_tuning_params it will effectively be
ignored for bluestore scenarios.
To resolve this we should move the setting of fs.aio-max-nr above the
setting of os_tuning_params, in this way the operator can define the
value of fs.aio-max-nr to be something other than 1048576 if they want
to.
Additionally, we can make the sysctl settings happen in 1 task rather
than multiple.
Useful for softwares that do data collection/monitoring like collectd.
They can connect to the socket and then retrieve information.
Even though the sockets are exposed now, I'm keeping the docker exec to
check the socket, this will allow newer version of ceph-ansible to work
with older versions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1563280
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit does a couple of things:
* use a common.yml file that contains things that can be played on both
container and non-container
* refactor the ability to copy the admin key to the nodes
Signed-off-by: Sébastien Han <seb@redhat.com>
Regardless if the partition is 'ceph' or something else, we don't want
to be as strick as checking for a particular partition.
If the drive has a partition, we just don't do anything.
This solves the case where the server reboots, disks get a different
/dev/sda (node) allocation. In this case, prior to restarting the server
/dev/sda was an OSD, but now it's /dev/sdb and the other way around.
In such scenario, we will try to prepare the OSD and create a new
partition, so let's not mess around with devices that have partitions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498303
Signed-off-by: Sébastien Han <seb@redhat.com>
This was causing a lot of pain with the handlers. Also the
implementation was not ideal since we were assembling files. Everything
can now be done with the ceph_crush module so let's remove that.
Signed-off-by: Sébastien Han <seb@redhat.com>
Multipath disks have partitions with a different format than what
ceph-ansible currently supports, this update makes ceph-ansible
aware of that format so multipath disks can be used as OSDs
Signed-off-by: Caleb Boylan <caleb.boylan@ormuco.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Description of problem: The 'get osd id' task goes through all the 10 times (and its respective timeouts) to make sure that the number of OSDs in the osd directory match the number of devices.
This happens always, regardless if the setup and deployment is correct.
Version-Release number of selected component (if applicable): Surely the latest. But any ceph-ansible version that contains ceph-volume support is affected.
How reproducible: 100%
Steps to Reproduce:
1. Use ceph-volume (LVM) to deploy OSDs
2. Avoid using anything in the 'devices' section
3. Deploy the cluster
Actual results:
TASK [ceph-osd : get osd id _uses_shell=True, _raw_params=ls /var/lib/ceph/osd/ | sed 's/.*-//'] **********************************************************************************************************************************************
task path: /Users/alfredo/python/upstream/ceph/src/ceph-volume/ceph_volume/tests/functional/lvm/.tox/xenial-filestore-dmcrypt/tmp/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:6
FAILED - RETRYING: get osd id (10 retries left).
FAILED - RETRYING: get osd id (9 retries left).
FAILED - RETRYING: get osd id (8 retries left).
FAILED - RETRYING: get osd id (7 retries left).
FAILED - RETRYING: get osd id (6 retries left).
FAILED - RETRYING: get osd id (5 retries left).
FAILED - RETRYING: get osd id (4 retries left).
FAILED - RETRYING: get osd id (3 retries left).
FAILED - RETRYING: get osd id (2 retries left).
FAILED - RETRYING: get osd id (1 retries left).
ok: [osd0] => {
"attempts": 10,
"changed": false,
"cmd": "ls /var/lib/ceph/osd/ | sed 's/.*-//'",
"delta": "0:00:00.002717",
"end": "2018-01-21 18:10:31.237933",
"failed": true,
"failed_when_result": false,
"rc": 0,
"start": "2018-01-21 18:10:31.235216"
}
STDOUT:
0
1
2
Expected results:
There aren't any (or just a few) timeouts while the OSDs are found
Additional info:
This is happening because the check is mapping the number of "devices" defined for ceph-disk (in this case it would be 0) to match the number of OSDs found.
Basically this line:
until: osd_id.stdout_lines|length == devices|unique|length
Means in this 2 OSD case it is trying to ensure the following incorrect condition:
until: 2 == 0
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1537103
On a non-collocated scenario, if a drive is faulty we can't really
remove it from the list of 'devices' without messing up or having to
re-arrange the order of the 'dedicated_devices'. We want to keep this
device list ordered. This will prevent the activation failing on a
device that we know is failing but we can't remove it yet to not mess up
the dedicated_devices mapping with devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
the gpt label creation doesn't work even with parted module.
This commit fixes the gpt label creation by using parted command
instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is particularly useful in CI environments where you dont have
the option of adding extra devices or volumes to the host. It is also
a simple change to support loopback devices
This task was originally needed to fix a docker installation issue
(see: #1030). This has been fixed, therefore it can be removed.
Fixes: #2199
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We were activating dmcrypt devices with the wrong command. Basically the
first task execute the wrong activate command. The task fails but
continues because of the 'failed_when: false'. Then the right activation
sequence is being done by the next task.
Signed-off-by: Sébastien Han <seb@redhat.com>
there is no need to have a condition on this task, this test should be
always run since the result will be interpreted later.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This will prevent ceph-ansible from using a loop device while it
shouldn't in auto_discovery mode.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Use `devices` variable instead of `ansible_devices`, otherwise it means
we are not using the devices which have been 'auto discovered'
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The current code will also return lvm devices such as /dev/dm-2, this
kind of device type is not supported by ceph-disk at the moment. Now we
just ignore them.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the initial implementation of this 'old' thing we were falling
into this issue without noticing
https://github.com/moby/moby/issues/30341 and where blindly using --rm,
now this is fixed the prepare container disappears and thus activation
fail.
I'm fixing this for old jewel images.
Also this fixes the machine reboot case where the docker logs are
purgend. In the old scenario, we now store the log locally in the same
directory as the ceph-osd-run.sh script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Konstantin Shalygin
Guillaume Abrioux
Vishal Kanaujia
Andrew Schoen
Andy McCrae
Sébastien Han
vasishta p shastry
Caleb Boylan
yaoning