Some people use the switch playbook to perform upgrade so they end up in
the same situation than https://bugzilla.redhat.com/show_bug.cgi?id=1650572
This is applying the same fix as
729744c6a8.
We don't want to fail on key that are not present since they will get
created after the mons are updated. They will be created by the task
"create potentially missing keys (rbd and rbd-mirror)".
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit fixes the merge conflict that occurred during the
auto-backport and auto-merge of the commit
488281187e.
Also please note that the commit
488281187e was merged (on PR 3477)
"as it is" (despite of merge conflicts) which was not supposed to be
the case ideally. This had a side-effect that the feature of supporting
multiple NTP daemons (new ones are namely chronyd and timesyncd) was
also backported which is itself against the convention. For
consistency's sake the feature was backported to stable-3.1 as well.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
sometimes we play the whole role `ceph-defaults` just to access the
default value of some variables. It means we play the `facts.yml` part
in this role while it's not desired. Splitting this role will speedup
the playbook.
Closes: #3282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0eb56e36f8)
"fetch nfs-ganesha development repository"
This has to be pushed directly to stable-3.2 since master has diverged
Signed-off-by: Bruceforce <Bruceforce@users.noreply.github.com>
When one of the currently supported NTP services has been set up,
disable rest of the NTP services on Ceph nodes.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 6fa757d343)
Merge ntp_debian.yml and ntp_rpm.yml into one (the new file is called
setup_ntp.yml) since they are almost identical. Also avoid repetition
of the common setup step for ntpd and chronyd services.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit b03ab60742)
# Conflicts:
# roles/ceph-infra/tasks/ntp_debian.yml
# roles/ceph-infra/tasks/ntp_rpm.yml
Applying and passing the OSD_BLUESTORE/FILESTORE on the fly is wrong for
existing clusters as their config will be changed.
Typically, if an OSD was prepared with ceph-disk on filestore and we
change the default objectstore to bluestore, the activation will fail.
The flag osd_objectstore should only be used for the preparation, not
activation. The activate in this case detects the osd objecstore which
prevents failures like the one described above.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 4c51130198)
If an existing cluster runs this config, and has ceph-disk OSD, the
`expose_partitions` won't be expected by jinja since it's inside the
'old' if. We need it as part of the osd_scenario != 'lvm' condition.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1640273
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit bef522627e)
We don't want to fail on key that are not present since they will get
created after the mons are updated. They will be created by the task
"create potentially missing keys (rbd and rbd-mirror)".
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650572
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit ebc901c6af)
since 0.0.0.0 is the default radosgw address (not 'address'), not
configuring an address explicitly, and instead configuring the radosgw
interface, would result in 0.0.0.0 being used, instead of falling
through to section that inspects the interface config option.
backport note: this cannot be cherry-picked from master since this code
doesn't exist in master.
fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1655131
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
The code is now able (again) to start osds that where configured with
ceph-disk on a non-container scenario.
Closes: https://github.com/ceph/ceph-ansible/issues/3388
Signed-off-by: Sébastien Han <seb@redhat.com>
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ed42262b37)
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d1fe32998)
default pool size should match the real default that is defined in ceph
itself.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fdc438dd0d)
This is to add a granularity level.
We can have ceph specific variables that user shouldn't have to change
here.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f1735e9bb0)
Add real default value for osd pool size customization.
Ceph itself has an `osd_pool_default_size` default value to `3`.
If users don't specify a pool size in various pools definition within
ceph-ansible, we should default to `3`.
By the way, this kind of condition isn't really clear:
```
when:
- rbd_pool_size | default ("")
```
we should try to get the customized value then default to what is in
`osd_pool_default_size` (which has its default value pointing to
`ceph_osd_pool_default_size` (`3`) as well) and compare it to
`ceph_osd_pool_default_size`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7774069d45)
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d4c0960f04)
change default value of `radosgw_address` to keep consistency with
`monitor_address`.
Moreover, `ceph-validate` checks if the value is '0.0.0.0' to determine
if it has to run `check_eth_rgw.yml`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1600227
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e4869ac8bd)
since `ceph-volume` introduction, there is no need to split those tasks.
Let's refact this part of the code so it's clearer.
By the way, this was breaking rolling_update.yml when `openstack_config:
true` playbook because nothing ensured OSDs were started in ceph-osd role (In
`openstack_config.yml` there is a check ensuring all OSD are UP which was
obviously failing) and resulted with OSDs on the last OSD node not started
anyway.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7fcc012e9)
This will tremendously help debugging daemons that fail on restart by
showing the systemd unit logs.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit a9b337ba66)
ceph.conf doesn't accept float value.
Typical error seen:
```
$ sudo ceph daemon osd.2 config get osd_memory_target
Can't get admin socket path: unable to get conf option admin_socket for osd.2:
parse error setting 'osd_memory_target' to '7823740108,8' (strict_si_cast:
unit prefix not recognized)
```
This commit ensures the value inserted in ceph.conf will be an integer.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 68dde424f6)
if firewalld.service systemd unit is masked, the handler will fail when
trying to restart it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1650281
(cherry picked from commit 63b9835cbb)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
* The default value of osd_memory_target used by ceph is 4294967296 bytes,
so use the same as ceph-ansible default.
* Convert ansible_memtotal_mb to bytes to calculate osd_memory_target
Signed-off-by: Neha Ojha <nojha@redhat.com>
(cherry picked from commit 10538e9a23)
Although this is not officially supported, this commit allows
`stable-3.2` to run against ansible 2.4.
This should ease the transition in RHOSP.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Don't hard code api port because it might be overridden by the user.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit e2f1f81de4)
The firewall setup for igw is not getting setup because iscsi_group_name
does not it exist. It should be iscsi_gw_group_name.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit a4ff52842c)
The default igw api port is 5000 in the manual setup docs and
ceph-iscsi-config package so this syncs up ansible.
Signed-off-by: Mike Christie <mchristi@redhat.com>
(cherry picked from commit a10853c5f8)
run commands on containers when containerized deployments.
(At the moment, all commands are run on the host only)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
since `rgw_multisite_endpoint_addr` has a default value to
`{{ ansible_fqdn }}`, it shouldn't be mandatory to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon
Signed-off-by: Ali Maredia <amaredia@redhat.com>
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.
Whenever required, these limits can be manually enforced by the user.
More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
we ensure that firewalld is installed and running before adding any
rule. This has no sense anymore not to reload firewalld once the rule
are added.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Sébastien Han
Rishabh Dave
Guillaume Abrioux
Bruceforce
Kai Wembacher
Noah Watkins
Neha Ojha
Jason Dillaman
Mike Christie
Ali Maredia