The admin key must be copied on the osd nodes only when we test the
shrink scenario. Shrink relies on ceph-disk commands that require the
admin key on the node where it's being executed.
Now we only copy the key when running on the shrink-osd scenario.
Signed-off-by: Sébastien Han <seb@redhat.com>
Refact of 8704144e31
There is no need to have duplicated tasks for this. The rgw pools
creation should be delegated on a monitor node se we don't have to care
if the admin keyring is present on rgw node.
By the way, only one task is needed to create the pools, we just need to
use the `docker_exec_cmd` fact already defined in `ceph-defaults` to
achieve it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1550281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During the tests, the remote epel repository is generating a lots of
errors leading to broken jobs (issue #2666)
This patch is about using a local repository instead of a random one.
To achieve that, we make a preliminary install of epel-release, remove
the metalink and enforce a baseurl to our local http mirror.
That should speed up the build process but also avoid the random errors
we face.
This patch is part of a patch series that tries to remove all possible yum failures.
Signed-off-by: Erwan Velu <erwan@redhat.com>
ceph command has to be executed from one of the monitor containers
if not admin copy present in RGWs. Task has to be delegated then.
Adds test to check proper RGW pool creation for Docker container scenarios.
Signed-off-by: Jorge Tudela <jtudelag@redhat.com>
When playing ceph-mds role, mon nodes have set a fact with the default
pg num for osd pools, we can simply default to this value for cephfs
pools (`cephfs_pools` variable).
At the moment the variable definition for `cephfs_pools` looks like:
```
cephfs_pools:
- { name: "{{ cephfs_data }}", pgs: "" }
- { name: "{{ cephfs_metadata }}", pgs: "" }
```
and we have a task in `ceph-validate` to ensure `pgs` has been set to a
valid value.
We could simply avoid this check by setting the default value of `pgs`
to `hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num']` and
let to users the possibility to override this value.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1581164
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
For a few moment we can see failures in the CI for containerized
scenarios because VMs are running out of space at some point.
The default in the images used is to have only 3Gb for root partition
which doesn't sound like a lot.
Typical error seen:
```
STDERR:
failed to register layer: Error processing tar file(exit status 1): open /usr/share/zoneinfo/Atlantic/Canary: no space left on device
```
Indeed, on the machine we can see:
```
Every 2.0s: df -h Tue May 29 17:21:13 2018
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 3.0G 3.0G 14M 100% /
```
The idea here is to expand this partition with all the available space
remaining by issuing an `lvresize` followed by an `xfs_growfs`.
```
-bash-4.2# lvresize -l +100%FREE /dev/atomicos/root
Size of logical volume atomicos/root changed from <2.93 GiB (750 extents) to 9.70 GiB (2484 extents).
Logical volume atomicos/root successfully resized.
```
```
-bash-4.2# xfs_growfs /
meta-data=/dev/mapper/atomicos-root isize=512 agcount=4, agsize=192000 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0 spinodes=0
data = bsize=4096 blocks=768000, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 768000 to 2543616
```
```
-bash-4.2# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 9.7G 1.4G 8.4G 14% /
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In the CI we can see at many times failures like following:
`Failure talking to yum: Cannot find a valid baseurl for repo:
base/7/x86_64`
It seems the fastest mirror detection is sometimes counterproductive and
leads yum to fail.
This fix has been added in the `setup.yml`.
This playbook was used until now only just before playing `testinfra`
and could be used before running ceph-ansible so we can add some
provisionning tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Erwan Velu <evelu@redhat.com>
let's move this variable in group_vars/all.yml in all testing scenarios
accordingly to this commit 1f15a81c48 so
we keep consistency between the playbook and the tests.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The NSS PKI database is needed only if radosgw_keystone_ssl
is explicitly set to true, otherwise the SSL integration is
not enabled.
It is worth noting that the PKI support was removed from Keystone
starting from the Ocata release, so some code paths should be
changed anyway.
Also, remove radosgw_keystone, which is not useful anymore.
This variable was used until fcba2c801a.
Now profiles drives the setting of rgw keystone *.
Signed-off-by: Luigi Toscano <ltoscano@redhat.com>
As of ceph 12.2.5 the type of the parameter `type` is not a name anymore but
an id, therefore an `int` is expected otherwise it will fail with the
following error
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in case of multimds we must check for the number of mds up instead of
just checking if the hostname of the node is in the fsmap.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
These are already handled by ceph-client/defaults/main.yml so the keys
will be created once user_config is set to True.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now that we are using ceph_volume_zap the partitions are
kept around and should be able to be reused.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Prior to this patch, the certificates where being generated on a single
node only (because of the run_once: true). Thus certificates were not
distributed on all the gateway nodes.
This would require a second ansible run to work. This patches fix the
creation and keys's distribution on all the nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1540845
Signed-off-by: Sébastien Han <seb@redhat.com>
We should stop putting everything in 'all'. This is too easy and this is
error prone as well for those who are separating variables into host
type, things that you should do.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now run tests on the newly created ceph_crush module. Now the CI will
create a specific hierarchy for the OSD.
Signed-off-by: Sébastien Han <seb@redhat.com>
The ceph-ansible upstream CI runs severals tests, including a
'idempotency/handlers' test. It means the playbook is run a first time
and then a second time with an other container image version to ensure the
handlers run properly and the containers are well restarted.
This can cause issues.
For instance, in that specific case which drove me to submit this commit,
I've hit the case where `latest` image ships ceph 12.2.3 while the `stable-3.0`
(which is the image used for the second run) ships ceph 12.2.2.
The goal of this test is not to verify we can upgrade from a specific
version to another but to ensure handlers are working even if it's a valid
failure here.
It should be caught by a test dedicated to that usecase.
We just need to have a container image which has a different id for
the upstream CI, we need the same content in container imagebut a different
image id in the registry since the test relies on image id to decide whether
the container should be restarted.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we have a task to test the handlers we can test a new container to
validate the service restart on a new container image.
Signed-off-by: Sébastien Han <seb@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The --crush-device-class flag for ceph-volume is not available in luminous so lets
remove this testing option for now until it's more widely available.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
When deploying Jewel from master we still need to enable this code since
the container image has such check. This check still exists because
ceph-disk is not able to create a GPT label on a drive that does not
have one.
Signed-off-by: Sébastien Han <seb@redhat.com>
the entrypoint to generate users keyring is `ceph-authtool`, therefore,
it can expand the `$(ceph-authtool --gen-print-key)` inside the
container. Users must generate a keyring themselves.
This commit also adds a check to ensure keyring are properly filled when
`user_config: true`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a missing test `test_rbd_mirror_service_is_running_from_luminous()`.
Also using bash -c "<cmd>" to make testinfra aware that later in
the upgrade process we are now running `luminous` ceph release so we
must skip the rbd tests related to `jewel` ceph release.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit add new osd scenarios, it aims to simplify the CI setup and
brings a better coverage on the OSD scenarios.
We decided to differentiate between filestore and bluestore, thinking
ahead when filestore won't be supported anymore.
So we now have two classes of tests:
* Filestore
* Bluestore
In each of those classes we have container and non-container.
Then for each we test the following:
* collocated
* collocated dmcrypt
* non-collocated
* non-collocated dmcrypt
* auto discovery collocated
* auto discovery collocated dmcrypt
This gives us a nice coverage and also reduces the footprint on the CI.
We are now up to 4 scenarios, each containing 6 OSD VMs.
Signed-off-by: Sébastien Han <seb@redhat.com>
1. add the variables to docker_collocation
2. trigger the check when a MDS is part of the inventory file, not when
we run on an MDS...
Signed-off-by: Sébastien Han <seb@redhat.com>
vagrant is serialized and takes a lot of time compare to simple reboot.
See the benchmarks below for 3 VMs:
[leseb@rick docker]$ time ANSIBLE_SSH_ARGS="-F
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/vagrant_ssh_config" ansible-playbook -i /home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/hosts reboot.yml
PLAY [mons]
****************************************************************************************************************************************************************************************************
TASK [Gathering Facts]
*****************************************************************************************************************************************************************************************
ok: [mon1]
ok: [mon2]
ok: [mon0]
TASK [restart machine]
*****************************************************************************************************************************************************************************************
changed: [mon2]
changed: [mon1]
changed: [mon0]
TASK [wait for server to boot]
*********************************************************************************************************************************************************************************
ok: [mon2 -> localhost]
ok: [mon0 -> localhost]
ok: [mon1 -> localhost]
TASK [uptime]
**************************************************************************************************************************************************************************************************
changed: [mon2]
changed: [mon0]
changed: [mon1]
PLAY RECAP
*****************************************************************************************************************************************************************************************************
mon0 : ok=4 changed=2 unreachable=0
failed=0
mon1 : ok=4 changed=2 unreachable=0
failed=0
mon2 : ok=4 changed=2 unreachable=0
failed=0
real 0m35.112s
user 0m5.737s
sys 0m1.849s
[leseb@rick docker]$ time vagrant reload
==> mon0: Halting domain...
==> mon0: Starting domain.
==> mon0: Waiting for domain to get an IP address...
==> mon0: Waiting for SSH to become available...
==> mon0: Creating shared folders metadata...
==> mon0: Rsyncing folder:
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/
=> /home/vagrant/sync
==> mon0: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> mon0: flag to force provisioning. Provisioners marked to run always
will still run.
==> mon1: Halting domain...
==> mon1: Starting domain.
==> mon1: Waiting for domain to get an IP address...
==> mon1: Waiting for SSH to become available...
==> mon1: Creating shared folders metadata...
==> mon1: Rsyncing folder:
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/
=> /home/vagrant/sync
==> mon1: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> mon1: flag to force provisioning. Provisioners marked to run always
will still run.
==> mon2: Halting domain...
==> mon2: Starting domain.
==> mon2: Waiting for domain to get an IP address...
==> mon2: Waiting for SSH to become available...
==> mon2: Creating shared folders metadata...
==> mon2: Rsyncing folder:
/home/leseb/reproduce-ci/tmp.zgGC7d5mIC/build/workspace/ceph-ansible/tests/functional/centos/7/docker/
=> /home/vagrant/sync
==> mon2: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> mon2: flag to force provisioning. Provisioners marked to run always
will still run.
real 1m31.850s
user 0m7.387s
sys 0m0.796s
Reboot via Ansible: 0m35.112s
Reboot via vagrant: 1m31.850s
We save 1/3 time.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have a variable called ceph_pools that is mandatory when
deploying a MDS.
It's a dictionnary that contains a pool name and a PG count. PG count is
mandatory and must be set, the playbook will fail otherwise.
Closes: https://github.com/ceph/ceph-ansible/issues/2017
Signed-off-by: Sébastien Han <seb@redhat.com>
The `always_run` key is deprecated and being removed in Ansible 2.4.
Using it causes a warning to be displayed:
[DEPRECATION WARNING]: always_run is deprecated.
This patch changes all instances of `always_run` to use the `always`
tag, which causes the task to run each time the playbook runs.
- the rbd-mirror unit systemd name is not the same when running jewel vs
luminous.
- servicemap is not available on jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we introduced collocation testing scenario, we need to adapt
current tests to this new scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we don't do this the client will create pools with a replica 3 since
osd_pool_default_size was gone in ceph-override.json. This was making
switch_to_containers failing.
Signed-off-by: Sébastien Han <seb@redhat.com>
Shared folder is not required for tests.
We should avoid hitting the error :
```
uninitialized constant VagrantPlugins::ProviderLibvirt::Action::ShareFolders
```
Also, disabling it might reduce the needed time in certains cases for the VMs
to be started.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If two environments are using the same subnet, we will get trouble
because of ips addresses conflicts.
This commit ensures each scenario has a uniq subnet for both public and cluster
network so we can setup several test environment at a time on a same hypervisor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
the path `/dev/disk/by-path/pci-0000:00:01.1-ata-1.0` doesn't exist.
it has to be changed to `/dev/disk/by-path/pci-0000:00:01.1-ata-1`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit refacts the code regarding all `set_osd_pool_default_*`
related tasks by avoiding usage of useless `set_fact` to determine
whether a key is present in `ceph_conf_overrides`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we don't bootstrap the mgr after the mon and the osds handler are
called, we will never be able to reach a clean state since the pgs
stats are handled by the mgr. This also happens when doing daemon
collocation.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1493920
Signed-off-by: Sébastien Han <seb@redhat.com>
This test doesn't work at the moment and need to be fixed.
Disabling it temporary to avoid errors in the CI.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
On a container env, machines don't have any ceph binaries so we need to
use a container to run the commands.
Signed-off-by: Sébastien Han <seb@redhat.com>
Delete these before creating them incase they are left around in a purge
cluster testing scenario. The purge-cluster.yml playbook does not
currently remove partitions used for journals.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The partition only needs created and given a gpt label so that a
PARTUUID will exist on the partition.
This task also makes the purge_lvm_osds scenario fail on the second
deployment after purging.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Prior to this patch this activation sequence for autodetection was
always skipped because we were asking to activate on device without
partitions, which doesn't make sense.
We also fix the way we lookup for a device, since the data partition is
always numbered 1, we take the min element of the dict.
Closes: https://github.com/ceph/ceph-ansible/issues/1782
Signed-off-by: Sébastien Han <seb@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
we need to force the value of `docker` variable which is initially set
to `false` since it's a migration from non-containerized to
containerized cluster.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The installation process is now described as follow:
* you still have to choose a 'ceph_origin' installation method. The
origin can be a 'repository' (add a new repository), distro (it will use
the packages provided by the native repo source of your distribution),
local (only available on redhat system, it installs locally built
packages). This option is not well tested, so use it carefully
* if ceph_origin == 'repository' you will have to decide what kind of
repository you want to enable:
- community: corresponds to the stable upstream/community version
- enterprise: corresponds to the stable enterprise/downstream version
(basically you are a red hat customer)
- dev: it will install ceph from packages built out of the github
development branches
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The lvm_volumes variable is now a list of dictionaries that represent
each OSD you'd like to deploy using ceph-volume. Each dictionary must
have the following keys: data, journal and data_vg. Each dictionary also
can optionaly provide a journal_vg key.
The 'data' key represents the lv name used for the OSD and the 'data_vg'
key is the vg name that the given lv resides on. The 'journal' key is
either an lv, device or partition. The 'journal_vg' key is optional and
must be the vg name for the journal lv if given. This key is mainly used
for purging of the journal lv if purge-cluster.yml is run.
For example:
lvm_volumes:
- data: data_lv1
journal: journal_lv1
data_vg: vg1
journal_vg: vg2
- data: data_lv2
journal: /dev/sdc
data_vg: vg1
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves issue: Multiple RGW Ceph.conf Issue #1258
In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.
Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com
Modified ceph-defaults and ran generate_group_vars_sample.sh
group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.
Uncommented added variables in ceph-defaults
Updated tests by adding value for radosgw_interface
Added radosgw_interface to centos cluster tests
Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh
In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
When you udpate to the latest version of the centos/7 box it always puts
the OS on /dev/sda, so do not use it as an OSD.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
If you use the 'dev' factor, the testing scenario will
use repos from shaman.ceph.com. You can define CEPH_DEV_BRANCH
and CEPH_DEV_SHA1 to specify which repo you'd like to test.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
the `test_osds_listen_on_*` consider OSDs will always listen on tcp port
with consecutive tcp port number starting from `6800`.
Eg.
If you have 2 OSDs, tests will assume it should listen on 2 ports for each
network (`public_network` and `cluster_network`), therefore:
`6800, 6801, 6802, 6803`
but sometime it doesn't happen this way and you can get OSDs listening
on tcp port like this :
`6800, 6801, 6802, 6805`
Then the test are failing while it shouldn't.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we are hitting this bug :
https://bugzilla.redhat.com/show_bug.cgi?id=1324587
eg:
`failed: internal error: Monitor path /var/lib/libvirt/qemu/domain-bs-docker-cl
uster-dmcrypt-journal-collocation_mon0_1499294943_ba9faf7bf296533177f6/monitor.
sock too big for destination`
and we can't upgrade libvirt in our CI for some reason
we need to get the directories name shorter in order to workaround this
issue
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The scenario set in `group_vars/all` for
docker-cluster-dmcrypt-journal-collocation is not the correct one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We were setting journal_collocation and used raw_journal_devices which
is definitely wrong. We should just stick with devices.
Signed-off-by: Sébastien Han <seb@redhat.com>
remove `ceph_mon_docker_interface` and use `monitor_interface` instead
for both containerized and non-containerized deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since ceph.conf.j2 has been updated to add ipv6 support, the different
variables in many scenarios need to be updated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Restore the check_socket that was removed by `5bec62b`.
This commit also improves the logging in `restart_*_daemon.sh` scripts
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Without this, we don't test the mgr role so we need to add it.
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
This is just nice to see in the test output so we know exactly what
configuration is going to be used.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Instead of relying on environment variables and --extra-vars simply
modify the group_vars/all that ships with the specific testing scenario
to enable ceph_rchs testing.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
In the environment we were testing on, MTU was set to 1500 which causes
download failures of our yum repos. There might be a better way to set
this instead of doing it here in ansible.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Decorating a test method directly with a pytest mark seems to break if
the test function does not explicitly define all pytest fixtures it
expects to recieve.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
journal_collocation was enabled so the test suite was testing this
scenario and obviously failed since there is no second partition to
verify.
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes the error: Call to virDomainCreateWithFlags failed: internal
error: Monitor path
/var/lib/libvirt/qemu/domain-docker-cluster-dedicated-journal_osd0_1487692576_dbfc21d851071d3e2cd2/monitor.sock
too big for destination
Signed-off-by: Sébastien Han <seb@redhat.com>
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
We need to test the cluster name support in this CI as well. This
commit might be prone to debate because it tests 2 things in a single
scenario. We first test our ability to deploy a cluster AND the cluster
name support. However it's easier to do it this way and will reduce the
amount of time for testingg. If we don't do this we will have a
duplicate those 2 existing tests into new ones 'only' to test the
cluster name support.
Signed-off-by: Sébastien Han <seb@redhat.com>
The osds are named differently for systemd in containerized deployments
so this new parameter is used to make that change transparent in the
tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This playbook could be used in the future to install anything else we
need on these nodes for testing purposes.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This also makes the conf_tests take the subnet as input
so multiple scenarios on differing subnets can use these tests.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
We want to test journal collocation here because we're gonna switch
xenial-cluster and centos7-cluster to use a dedicated journal.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
We really only need to test the raw-multi-journal OSD scenario on one
OS and it needed a better name to use with the CI.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This scenario duplicates what we are currently doing with our
ceph-ansible testing using OVH and a single node, except now
we are using 4 separate nodes.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
This box supports both libvirt and virtualbox. Eventually we want to
be building our own boxes but this should work in the short term.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This box supports both virtualbox and libvirt. Eventually
we want to be building our own vagrant boxes, but this might
work for now.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: vagrant#boxes
This can be used to test if mon hosts and
mon initial members are being set properly with
multiple hosts.
Also, to verify that monitor_address and monitor_interface
options both work as described.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
This was just a placeholder until we could get more valid scenarios in
place.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: testing#updates
This will allow for no changes needed in the ansible playbook command
when adding new scenarios. Each scenario will just need a hosts file and
a group_vars directory to define how the cluster should be setup.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Sébastien Han
Guillaume Abrioux
Erwan Velu
jtudelag
Luigi Toscano
Andrew Schoen
John Fulton
Major Hayden
Alfredo Deza
Ali Maredia
Andrew Schoen
SirishaGuduru
Alfredo Deza