Sébastien Han
4f5d195788
Ability to use a directory for OSD instead of a disk
...
This commit implements a fourth scenario where we can directely use a
directory instead of a block device for the OSDs. The purpose of this
scenario is more testing-oriented. Please note that we do not check
the filesystem underneath the directory so it is really up to you to
configure this properly. Declaring more than one directory on the
same filesystem will confuse Ceph.
Fixes : #14
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-07-03 15:30:49 +02:00
Alexis Lahouze
132e78df84
Allow devices to be partition instead of disks (used for some physical servers with a sigle disk for system and storage).
2014-06-26 14:19:09 +02:00
Alexis Lahouze
8b3f428f1f
Replaced all by the list of host groups to be able to run the playbook with non-ceph servers.
2014-06-26 09:52:06 +02:00
Leseb
a608b65cdd
Merge pull request #86 from maethor/patch-1
...
Update README.md
2014-06-13 16:36:49 +02:00
Guillaume Subiron
0ec9298b93
Update README.md
...
Two lines are cut in the README. This patch fix this using http://www.sebastien-han.fr/blog/2014/03/03/Announcing-ceph-ansible-playbooks/ .
2014-06-13 16:30:50 +02:00
Leseb
422629557d
Merge pull request #85 from kchristensen/fix-architecture-tests
...
Fix Ansible architecture tasks
2014-06-02 21:06:28 +02:00
Kyle Christensen
168faef3bd
Fix Ansible architecture tasks
2014-06-02 15:00:43 -04:00
Leseb
ba07e01cb1
Merge pull request #84 from leseb/fix-no-ext4
...
Since Emperor, Ceph stores xattr into levelDB thus this option is not
2014-05-20 15:14:48 +02:00
Sébastien Han
670bec24c7
Since Emperor, Ceph stores xattr into levelDB thus this option is not
...
needed anymore.
Fixes : #83
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-05-20 15:04:09 +02:00
Leseb
32b9a84dcd
Merge pull request #82 from lorin/master
...
Use Vagrant's Ansible provisioner
2014-05-12 06:42:28 -07:00
Lorin Hochstein
92c0445989
Use Vagrant's Ansible provisioner
...
Use Vagrant's built-in support for Ansible provisioner. This eliminates the need
for a hosts file, and simplifies the ansible config file.
Renames config from .ansible.cfg to ansible.cfg since Ansible expects the file
to be called ansible.cfg and be adjacent to Vagrantfile when using the Vagrant
provisioner.
2014-05-11 19:34:37 -04:00
Leseb
3b68622f9d
Merge pull request #81 from leseb/enh-testing-mode
...
Enable single host mode
2014-05-01 01:27:20 +02:00
Sébastien Han
567c0bb6ce
Enable single host mode
...
This commit introduces a new config option 'osd crush chooseleaf type'.
With the help of this option and by setting it to '0' we tell Ceph to
store all the replicas on a single host. Basically we tell CRUSH to
iterate over disk and not over host.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-05-01 01:24:20 +02:00
Leseb
d6a82a6201
Merge pull request #80 from leseb/change-default-disk
...
Change the default disk numbering
2014-04-30 17:58:51 +02:00
Sébastien Han
ed52853d20
Change the default disk numbering
...
While trying to auto-provision with vagrant, new disks get /dev/sdb and
so forth. So starting from /dev/sdd doesn't make sense.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-30 17:57:10 +02:00
Leseb
358b58bd4a
Merge pull request #79 from leseb/fix-rgw-email
...
Fix non-declared rgw email_address variable
2014-04-30 14:58:02 +02:00
Sébastien Han
f0b9994a03
Fix non-declared rgw email_address variable
...
Fix : #77
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-30 14:56:37 +02:00
Leseb
b0d9090cc6
Merge pull request #76 from AcalephStorage/fetch-fsid
...
Removed dependency on mon[0]
2014-04-30 13:42:08 +02:00
Dexter John Genterone
728e80df5c
keys are now copied from the first available mon host
...
since we're now using fsid for the directory name, it should be safe to
just copy the keys from all mon hosts. Once they are copied, the rest of
the hosts will just skip copying. :)
2014-04-30 16:02:07 +08:00
Hunter Nield
48c1dcd92b
Avoid ip/fqdn weirdness & use fsid path for keys
2014-04-30 15:16:11 +08:00
Leseb
b4fad6fcfc
Merge pull request #74 from guestisp/fix-73-use-ansible-fqdn-in-purge-yml
...
Fix #73 by using `ansible_fqdn`
2014-04-18 14:01:47 +02:00
Leseb
95d4f4bd1a
Merge pull request #72 from guestisp/fix-71-typo-in-purge-yml
...
Fix #71 . Removed wrong `---`
2014-04-18 14:01:36 +02:00
Leseb
2ccbab2c7c
Merge pull request #70 from guestisp/fix-69-mon-osd-min-down-reporters
...
Fix #69 - mon osd min down reporters
2014-04-18 14:01:22 +02:00
Alessandro Corbelli
c26b269b5a
Fix #73 by using `ansible_fqdn`
2014-04-18 10:55:31 +02:00
Alessandro Corbelli
34706fa613
Fix #71 . Removed wrong `---`
2014-04-18 10:52:22 +02:00
Alessandro Corbelli
58ea349b53
Fix #69 - mon osd min down reporters
2014-04-18 10:47:30 +02:00
Leseb
1d5ec9ae1e
Merge pull request #68 from leseb/purge-ceph
...
Add a purge playbook to remove Ceph
2014-04-14 15:19:03 +02:00
Sébastien Han
be7f8ab89b
Add a purge playbook to remove Ceph
...
The playbook removes packages, configuration files and ALL THE DATA from
Ceph.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-14 15:18:34 +02:00
Leseb
080e2011b4
Merge pull request #67 from leseb/improve-ceph-conf
...
Improve ceph.conf
2014-04-11 14:08:52 +02:00
Sébastien Han
3c0ffd671f
Improve ceph.conf
...
Add tunables for:
* recovery
* performance
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-11 14:07:37 +02:00
Leseb
74eb9eaa04
Merge pull request #66 from leseb/wip-maintenance
...
Add maintenance playbook
2014-04-09 17:53:55 +02:00
Sébastien Han
9a60f122ef
Add maintenance playbook
...
This playbook was made to automate Ceph servers maintenance
Typical use case: hardware change
By running this playbook you will set the 'noout' flag on your
cluster, which means that OSD **can't** be marked as out
of the CRUSH map, but they will be marked as down.
Basically we tell the cluster to don't move any data since
the operation won't last for too long.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-04-09 17:51:59 +02:00
Leseb
05fdc19182
Merge pull request #65 from guestisp/add-support-for-subdomains-calls
...
Add support for subdomain calls in S3 api.
2014-04-07 13:29:17 +02:00
Alessandro Corbelli
61ab445128
Add support for subdomain calls in S3 api. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls
2014-04-07 12:06:24 +02:00
Leseb
6cadebd5c5
Merge pull request #61 from guestisp/remove-default-users-from-rgw
...
Remove RadosGW default users
2014-03-26 11:35:54 +01:00
Alessandro Corbelli
d7195922b2
Totally removed test users creation from RGW tasks
2014-03-26 11:34:05 +01:00
Leseb
d2b29bb13b
Merge pull request #62 from guestisp/fix-54-use-hostname-in-ceph-conf
...
Use ansible_hostname in RGW config inside ceph.conf
2014-03-26 11:27:32 +01:00
Alessandro Corbelli
c2a0865464
Use ansible_hostname in RGW config inside ceph.conf
...
Fix #54
2014-03-26 11:26:18 +01:00
Alessandro Corbelli
c7476fb375
Remove RadosGW default users
2014-03-26 11:22:37 +01:00
Leseb
4aeaa9609f
Update README
2014-03-23 23:20:09 +01:00
Leseb
3ae0b29adb
Merge pull request #59 from jcftang/wip-motd-mon
...
Drop a update-motd.d fragment for monitors so when the user/admin logs i...
2014-03-23 11:59:58 +01:00
Jimmy Tang
c3480a588c
Drop a update-motd.d fragment for monitors so when the user/admin logs into a monitor there is a small notice for the user about the state of the ceph cluster. Works only on ubuntu for now
2014-03-22 14:57:22 +00:00
Leseb
e6c162167c
Merge pull request #58 from guestisp/skip-missing-hosts-from-rgw-conf
...
Skip missing RGW hosts in ceph.conf
2014-03-20 13:42:09 +01:00
Alessandro Corbelli
7623376203
Skip missing RGW hosts in ceph.conf
2014-03-20 12:14:43 +01:00
Leseb
7339a6542f
Fix README typo
...
Fix typo
2014-03-19 19:40:42 +01:00
Leseb
06368d309a
Merge pull request #57 from leseb/fix-readme
...
Highlight important facts (fsid and monitor key)
2014-03-19 19:38:04 +01:00
Sébastien Han
b202df711a
Highlight important facts (fsid and monitor key)
...
Update the README with an entry for the fsid and monitor keys. We
dediced to remove every key from the default variables.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-03-19 19:36:22 +01:00
Leseb
7b164dcdcd
Merge pull request #56 from leseb/fix-rgw-key-conf
...
Fix rgw section name
2014-03-19 16:37:00 +01:00
Sébastien Han
b21174b189
Fix section name
...
All the rgw instance should share the same key so the section name
should not be changed.
Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
2014-03-19 16:29:57 +01:00
Leseb
57d1f855f4
Merge pull request #55 from leseb/fix-rgw-pkg
...
Remove hardcoded distro
2014-03-19 16:28:20 +01:00