This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, the initial keyrings list has changed, it means when
upgrading from Luminous or Mimic, it is expected there's a mismatch
between what is found on the cluster and the expected initial keyring
list hardcoded in ceph_key module. We shouldn't fail when upgrading to
nautilus.
str_to_bool() took from ceph-volume.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The following lint issues have been resolved:
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-mon/tasks/ceph_keys.yml:2
[305] Use shell only when shell functionality is required
/home/travis/build/ceph/ceph-ansible/roles/ceph-osd/tasks/start_osds.yml:47
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:2
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:7
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:14
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:19
[301] Commands should not change things if nothing needs doing
/home/travis/build/ceph/ceph-ansible/roles/ceph-rgw/tasks/multisite/destroy.yml:24
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
There's no need to set the client_admin_ceph_authtool_cap variable
via a set_fact task.
Instead we can set this in the role defaults.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The administrator keyring needs full capabilities on mds like mon,
osd and mgr.
Whithout this, the client.admin key won't be able to run commands
against mds (like ceph tell mds.0 session ls)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1672878
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Set directories to 755 and files to 644 to /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} recursively instead of setting files and directories to 755 recursively. The ceph mon process writes files to this path with permissions 644. This update stops ansible from updating the permissions in /var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }} every time ceph mon writes a file and increases idempotency.
Signed-off-by: Kevin Coakley <kcoakley@sdsc.edu>
`ceph-mon` tries to redeploy monitors because it assumes it was not yet
deployed since `mon_socket_stat` and `ceph_mon_container_stat` are
undefined (indeed, we stop the daemon before calling `ceph-mon` in the
switch_to_containers playbook).
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
167 is the ceph uid for Red Hat based system, thus trying to deploy a
monitor on Debian fail since the ceph user id on that system is 64045.
This commit uses the ceph_uid variable which contains the right uid
based on system/container detection.
Closes: https://github.com/ceph/ceph-ansible/issues/3589
Signed-off-by: Sébastien Han <seb@redhat.com>
With 'podman version 1.0.0' on RHEL8 beta the 'get ceph version' and
'ceph monitor mkfs' commands fail [1] with "error configuring network
namespace for container Missing CNI default network".
When net=host is added these errors are resolved. net=host is used in
many other calls (grep -R net=host | wc -l --> 38).
Fixes: #3561
Signed-off-by: John Fulton <fulton@redhat.com>
(cherry picked from commit 410abd7745)
This reverts commit ee08d1f89a which was
mostly to workaround a bug in ceph@master. Now, ceph@master is fixed so
reverting this. Thanks to https://github.com/ceph/ceph/pull/25900
Signed-off-by: Sébastien Han <seb@redhat.com>
Somewhat something changed with the introduction of msg2 and we have to
add each node as a peer so the monitors can form a quorum. This might be
due to our CI environment, although adding this is completly harmless
and solves monitors not being able to form quorum.
It seems that the initial monitor map wasn't containing the right
information about the peers (addresses like 0.0.0.0/0r1, for each rank.
Signed-off-by: Sébastien Han <seb@redhat.com>
These aliases have led to several issues making believe that ceph
binaries are actually present on the host when running the command.
However it wasn't explicit that the commands were only ran inside a
container.
It has brought to much confusion so we decided to remove them.
Closes: https://github.com/ceph/ceph-ansible/issues/3445
Signed-off-by: Sébastien Han <seb@redhat.com>
Json is a type structure which is always typed as a string, where before
this we were declaring a dict, which is not a json valid structure.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit unifies the container and non-container code, which in the
meantime gives use the ability to deploy N mon container at the same
time without having to serialized the deployment. This will drastically
reduces the time needed to bootstrap the cluster.
Note, this is only possible since Nautilus because the monitors are
bootstrap the initial keys on their own once they reach quorum. In the
Nautilus version of the ceph-container mon, we stopped generating the
keys 'manually' from inside the container, for more detail see: https://github.com/ceph/ceph-container/pull/1238
Signed-off-by: Sébastien Han <seb@redhat.com>
This will speed up the deployment and also deploy mon and mgr collocated
just as recommended.
This won't prevent you of adding more and dedicaded machines for mgr if
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the first iteration, the command won't return anything, or can
simply fail and might not return a valid json structure. Ansible will
fail parsing it in the filter `from_json` so let's default that variable
to empty dictionary.
Signed-off-by: Sébastien Han <seb@redhat.com>
`osd_pool_default_pg_num` parameter is set in `ceph-mon`.
When using ceph-ansible with `--limit` on a specifc group of nodes, it
will fail when trying to access this variables since it wouldn't be
defined.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1518696
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is needed for Nautilus since the ceph-create-keys script goes away.
(https://github.com/ceph/ceph/pull/21305)
Now the module if called with 'state: fetch_initial_keys' will lookup
keys generated by the monitor and write them down on the filesystem to
the right location (/etc/ceph and /var/lib/ceph/boostrap*).
This is not applicable to container since keys are generated by the
container only.
Signed-off-by: Sébastien Han <seb@redhat.com>
Calling command should have changed_when false otherwise each time it
runs it will show as 'changed' and this is irrelevant.
Commands should not change things if nothing needs doing
Signed-off-by: Sébastien Han <seb@redhat.com>
since the jinja logic has been moved into ansible task, we can simply
this part of the code and use `_current_monitor_address`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of now, we should no longer support Jewel in ceph-ansible.
The latest ceph-ansible release supporting Jewel is `stable-3.1`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Fixes the deprecation warning:
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|search` use `result is search`.
Signed-off-by: Noah Watkins <nwatkins@redhat.com>
Instead used "import_tasks" and "include_tasks" to tell whether tasks
must be included statically or dynamically.
Fixes: https://github.com/ceph/ceph-ansible/issues/2998
Signed-off-by: Rishabh Dave <ridave@redhat.com>
...with the exception of the purge operation, since
removing Calamari would still be useful for an old
cluster.
Signed-off-by: John Spray <john.spray@redhat.com>
If calamari is already installed and ceph has been upgraded to a higher
version the initialisation will fail later. So if we detect the
calamari-server is too old compare to ceph_rhcs_version we try to update
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1601755
Signed-off-by: Sébastien Han <seb@redhat.com>
In environments where we wish to have manual/greater control over
how the bootstrap keyrings are used, we need to able to externally
define what the mgr keyring secret will be and have ceph-ansible
use it, instead of it being autogenerated
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1610213
Signed-off-by: Graeme Gillies <ggillies@akamai.com>
When using a module there is no need to apply this Ansible option. The
module will handle the idempotency on its own. So the module decides
wether or not the task has changed during the execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
keyring files in /etc/ceph. Default value is the same as it was (0600),
but this variable allows user to override it (f.e. set it to 0640).
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
The current secure cluster play runs with all the monitors. The rerun
of this task is unnecessary and can be skipped.
Fixes: #2737
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
The initial keyring is generated from ansible server locally and the snippet works well for both v2 and v3 of python.
I don't see any reason why we should explicitly invoke`python2` instead of just `python`.
In some setups, `python2` is not symlinked to `python`; while `python` and `python3` refer to v2 and v3 respectively.
Signed-off-by: Ha Phan <thanhha.work@gmail.com>
Since the openstack_config.yml has been moved to `ceph-osd` we must move
this `set_fact` in ceph-osd otherwise the tasks in
`openstack_config.yml` using `openstack_keys` will actually use the
defaults value from `ceph-defaults`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1585139
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move cephfs pools creation in `ceph-mds` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There is no need to stat for created mgr keyrings since they are created
anyway when deploying a ceph cluster > jewel. In case of a jewel
deployment we won't enter that block.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Until all the mons haven't been updated to Luminous, there is no way to
create a key. So we should do the key creation in the mon role only if
we are not part of an update.
If we are then the key creation is done after the mons upgrade to
Luminous.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Sébastien Han <seb@redhat.com>
On containerized deployment,
when upgrading from jewel to luminous, mgr keyring creation fails because the
command to create mgr keyring is executed on a container that is still
running jewel since the container is restarted later to run the new
image, therefore, it fails with bad entity error.
To get around this situation, we can delegate the command to create
these keyrings on the first monitor when we are running the playbook on the last monitor.
That way we ensure we will issue the command on a container that has
been well restarted with the new image.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If openstack_pools contains an application key it will be used to apply
this application pool type to a pool.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1562220
Signed-off-by: Sébastien Han <seb@redhat.com>
As of ceph 12.2.5 the type of the parameter `type` is not a name anymore but
an id, therefore an `int` is expected otherwise it will fail with the
following error
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The last mon creates the keys with a particular mode, while copying them
to the other mons (first and second) we must re-use the mode that was
set.
The same applies for the client node, the slurp preserves the initial
'item' so we can get the mode for the copy.
Signed-off-by: Sébastien Han <seb@redhat.com>
This key is created after the last mon is up so there is no need to try
to push it from the first mon. The initia mon container is not creating
the mgr key, ansible does. So this key will never exist.
The key will go into the fetch dir once the last mon is up, then when
the ceph-mgr plays it will try to get it from the fetch directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
During the initial bootstrap of the first mon, the monmap file is
destroyed so it's not available and ansible will never find it.
Signed-off-by: Sébastien Han <seb@redhat.com>
Useful for softwares that do data collection/monitoring like collectd.
They can connect to the socket and then retrieve information.
Even though the sockets are exposed now, I'm keeping the docker exec to
check the socket, this will allow newer version of ceph-ansible to work
with older versions.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1563280
Signed-off-by: Sébastien Han <seb@redhat.com>
We know bindmount with the :z option at the end of the -v command so
this will basically run the exact same command as we used to run. So to
speak:
chcon -Rt svirt_sandbox_file_t /var/lib/ceph
Signed-off-by: Sébastien Han <seb@redhat.com>
allow_multimds will be officially deprecated in Mimic, specify it
only for all versions of Ceph where it was declared stable. Going
forward, specify only max_mds.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
If people keep on using the mon_cap, osd_cap etc the playbook will
translate this old syntax on the flight.
Signed-off-by: Sébastien Han <seb@redhat.com>
When creating pools, it's crucial to expose all the options available as
part of the pool creation command. As explained in:
http://docs.ceph.com/docs/jewel/rados/operations/pools/
Signed-off-by: Sébastien Han <seb@redhat.com>
Running the last portion (insert new default and add new default crush
tasks) of crush_rules.yml only on the last monitor is
wrong since ceph CLI calls usually end up on the master having the
quorum, which is by default the one with the lower IP.
So if we run the command and end up on another mon the creation will
happen on the default crush rule because the particular mon hasn't been
updated.
To fix this we remove the |last on the include and use run_once: true on
certain tasks, then we let the final two tasks run on all the monitors.
Signed-off-by: Sébastien Han <seb@redhat.com>
On releases after jewel the option
'osd_pool_default_crush_replicated_ruleset' does not exist anymore, it's
called osd_pool_default_crush_rule.
Signed-off-by: Sébastien Han <seb@redhat.com>
Instead of creating the CRUSH hierarchy with Ansible tasks using the
command module we now rely on the ceph_crush module.
Signed-off-by: Sébastien Han <seb@redhat.com>
One could want to add new crush rules while keeping his current default rule.
Fixed it so that it works with all rules defined as "default: false". If multiple rules are defined as default (should not be) then the last rule listed in "crush_rules" is taken as default.
Previously it was necessary to provide a value (eventually an
empty string) for the "rule_name" key for each item in
openstack_pools. This change makes that optional and defaults to
empty string when not given.
Since Luminous we need to set the application tag for each pool,
otherwise a CEPH_WARNING is generated when the pools are in use.
We should assign the OpenStack pools to their default which would be
"rbd". When updating to Luminous this would happen automatically to the
vms, images, backups and volumes pools, but for new deploys this is not
the case.
While hostname -f will always return an hostname including its
domain part and -s without the domain part, the behavior when
no arguments are given can include or not include the domain part
depending on how the system is configured; the socket name might
not match the instance name then.
Was called too early, container was not yet started so the commands failed.
Moved the section after include docker/main.yml
Signed-off-by: Greg Charot <gcharot@redhat.com>
Use a nicer syntax for `local_action` tasks.
We used to have oneliner like this:
```
local_action: wait_for port=22 host={{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }} state=started delay=10 timeout=500 }}
```
The usual syntax:
```
local_action:
module: wait_for
port: 22
host: "{{ hostvars[inventory_hostname]['ansible_default_ipv4']['address'] }}"
state: started
delay: 10
timeout: 500
```
is nicer and kind of way to keep consistency regarding the whole
playbook.
This also fix a potential issue about missing quotation :
```
Traceback (most recent call last):
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 213, in <module>
main()
File "/tmp/ansible_wQtWsi/ansible_module_command.py", line 185, in main
rc, out, err = module.run_command(args, executable=executable, use_unsafe_shell=shell, encoding=None, data=stdin)
File "/tmp/ansible_wQtWsi/ansible_modlib.zip/ansible/module_utils/basic.py", line 2710, in run_command
File "/usr/lib64/python2.7/shlex.py", line 279, in split
return list(lex) File "/usr/lib64/python2.7/shlex.py", line 269, in next
token = self.get_token()
File "/usr/lib64/python2.7/shlex.py", line 96, in get_token
raw = self.read_token()
File "/usr/lib64/python2.7/shlex.py", line 172, in read_token
raise ValueError, "No closing quotation"
ValueError: No closing quotation
```
writing `local_action: shell echo {{ fsid }} | tee {{ fetch_directory }}/ceph_cluster_uuid.conf`
can cause trouble because it's complaining with missing quotes, this fix solves this issue.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510555
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently, we can define crush location for each host but only crush roots and crush rules are created. This commit automates other routines for a complete solution:
1) Creates rack type crush buckets defined in {{ ceph_crush_rack }} of each osd host. If it's not defined by user then a rack named 'default_rack_{{ ceph_crush_root }}' would be added and used in next steps.
2) Move rack type crush buckets defined in {{ ceph_crush_rack }} into crush roots defined in {{ ceph_crush_root }} of each osd host.
3) Move hosts defined in {{ ceph_crush_rack }} into crush roots defined in {{ ceph_crush_root }} of each osd host.
Signed-off-by: Eduard Egorov <eduard.egorov@icl-services.com>
There is no reasons why we can't use crush rules when deploying
containers. So moving the inlcude in the main.yml so it can be called.
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-create-keys is idempotent so it's not an issue to run it each time
we play ansible. This also fix issues where the 'creates' arg skips the
task and no keys get generated on newer version, e.g during an upgrade.
Closes: https://github.com/ceph/ceph-ansible/issues/2228
Signed-off-by: Sébastien Han <seb@redhat.com>
A recent change [1] required that the openstack_keys
param always containe an acls list. However, it's
possible it might not contain that list. Thus, this
param sets a default for that list to be empty if it
is not in the structure as defined by the user.
[1] d65cbaa539
If ceph-ansible deploys a Ceph cluster with "openstack_config: true"
and sets the openstack_keys map to have certain ACLs or permissions,
the requested ACLs or permissions are only set on one of the monitor
nodes [2] when they should be set on all of them.
This patch solves [3] the above issue by having the chmod and setfacl
tasks iterate the list of mon nodes (including the mon node that the
task was delegated to) to apply the chmod of setfacl to the keys in
openstack_keys.
[1]
```
openstack_keys:
- { name: client.openstack, key: "$(ceph-authtool --gen-print-key)", mon_cap: "allow r", osd_cap: "allow class-read object_prefix rbd_children, allow rwx pool=images, allow rwx pool=vms, allow rwx pool=volumes, allow rwx pool=backups", mode: "0600", acls: ["u:nova:r--", "u:cinder:r--", "u:glance:r--", "u:gnocchi:r--"] }
```
[2]
```
$ ansible mons -m shell -b -a "ls -l /etc/ceph/ceph.client.openstack.keyring ; getfacl /etc/ceph/ceph.client.openstack.keyring"
192.168.1.26 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.29 | SUCCESS | rc=0 >>
-rw-r--r--. 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
group::r--
other::r--getfacl: Removing leading '/' from absolute path names
192.168.1.23 | SUCCESS | rc=0 >>
-rw-r--r--. 1 root root 253 Nov 3 20:30 /etc/ceph/ceph.client.openstack.keyring
user::rw-
group::r--
other::r--getfacl: Removing leading '/' from absolute path names
$
```
[3]
```
(undercloud) [stack@hci-director ceph-ansible]$ ansible mons -m shell -b -a "ls -l /etc/ceph/ceph.client.openstack.keyring ; getfacl /etc/ceph/ceph.client.openstack.keyring"
192.168.1.25 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.29 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
192.168.1.27 | SUCCESS | rc=0 >>
-rw-r-----+ 1 root root 253 Nov 14 01:12 /etc/ceph/ceph.client.openstack.keyring
user::rw-
user:glance:r--
user:nova:r--
user:cinder:r--
user:gnocchi:r--
group::---
mask::r--
other::---getfacl: Removing leading '/' from absolute path names
(undercloud) [stack@hci-director ceph-ansible]$
```
Only chmod or setfacl the requested keyring(s) in the
opentack_keys data structure when the mode or acls keys
of that data structure exist.
User may specify four permission combinations for the
keyring file(s): 1. only set ACL, 2. only set mode,
3. set neither mode nor ACL, 4. set mode and then ACL.
Fixes: #2092
Guillaume Abrioux
Dimitri Savineau
Kevin Coakley
Patrick Donnelly
Sébastien Han
John Fulton
Noah Watkins
Rishabh Dave
John Spray
Graeme Gillies
George Shuklin
Ha Phan
Vishal Kanaujia
Andrew Schoen
Douglas Fuller
jtudelag
Greg Charot
Giulio Fidente
Andy McCrae
Eduard Egorov