When using python 2 and the task with a loop is skipped then it generates
an error.
Unexpected templating type error occurred on
({{ (pool_list.stdout | from_json)['pools'] }}): expected string or buffer
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cf6e33346e)
The PG autoscaler can disrupt the PG checks so the idea here is to
disable it and re-enable it back after the restart is done.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13036115e2)
When monitors and rgw are collocated with multisite enabled, the
rolling_update playbook fails because during the workflow, we run some
radosgw-admin commands very early on the first mon even though this is
the monitor being upgraded, it means the container doesn't exist since
it was stopped.
This block is relevant only for scaling out rgw daemons or initial
deployment. In rolling_update workflow, it is not needed so let's skip
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970232
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7166cccbf)
when running docker-to-podman playbook, there's no need to call
`ceph-config` and `ceph-rgw` from the role `ceph-handler`.
It can even have side effects when coming from a baremetal cluster that
was previously migrated using the switch-to-containers playbook. Indeed
it might complain about missing .target systemd unit since they are
removed during that migration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70f19be367)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
since `ceph-rgw` may be called from `ceph-handler` in some contexts we
should avoid rerunning it unnecessarily.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8617081664)
When collocating rgw with either a mon, mgr or osd, switching from
single site to a multisite rgw setup failed because of the handlers
triggered between the ansible play of the collocated daemon and the play
of the rgw. Since the multisite changes are not yet applied the handlers
fail.
The idea here is to ensure we run the multisite configuration from the
ceph-handler role before the restart happens, this way it won't complain
because of non existing multisite configuration.
(Note: this is also valid when simply changing a multisite configuration)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1888630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 513c8cfe55)
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5da593604a)
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 46d4d97da9)
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a802fa2810)
In non containerized deployment we check if the service is running
via the socket file presence.
This is done via the xxx_socket_stat variable that check the file
socket in the /var/run/ceph/ directory.
In some scenarios, we could have the socket file still present in
that directory but not used by any process.
That's why we have the xxx_stat variable which clean those leftovers.
The problem here is that we're set the variable for the handlers status
(like handler_mon_status) based on xxx_socket_stat instead of xxx_stat.
That means we will trigger the handlers if there's an old socket file
present on the system without any process associated.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1866834
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 733596582d)
The ceph-crash tasks present in the ceph-handler role don't need to be
executed on all nodes.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 18e3c7a0a2)
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9d2f2108e1)
The iscsigws restart scripts for tcmu-runner and rbd-target-{api,gw}
services only call the systemctl restart command.
We don't really need to copy a shell script to do it when we can use
the ansible service module instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cbe79428e6)
Given that we delegate to the first monitor, we must read the value of
`container_exec_cmd` from this node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit eb9112d8fb)
When unsetting the noup flag, we must call container_exec_cmd from the
delegated node (first mon member)
Also, adding a `run_once: true` because this task needs to be run only 1
time.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 22865cde9c)
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3496a0efa2)
411bd07d54 introduced a bug in handlers
using `handler_*_status` instead of `hostvars[item]['handler_*_status']`
causes handlers to be triggered in anycase even though
`handler_*_status` was set to `False` on a specific node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 30200802d9)
When the iscsi gateway or the ceph configuration file change then we
need to notify the rbd target api/gw services to be restarted.
This patch also merges the rbd-target-api and rbd-target-gw handler
into a single file and listen.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bc701860d5)
We are using multiple listen topics with the handlers. That means that
we are notifying 4 tasks for each handler.
Instead we can group the listen on an include_tasks and based on the
group condition.
Before:
NOTIFIED HANDLER ceph-handler : set _mon_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mon restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mon daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mon_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _osd_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy osd restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph osds daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _osd_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _mds_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mds restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mds daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mds_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _rgw_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy rgw restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph rgw daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _rgw_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _mgr_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy mgr restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph mgr daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _mgr_handler_called after restart for mon0
NOTIFIED HANDLER ceph-handler : set _rbdmirror_handler_called before restart for mon0
NOTIFIED HANDLER ceph-handler : copy rbd mirror restart script for mon0
NOTIFIED HANDLER ceph-handler : restart ceph rbd mirror daemon(s) for mon0
NOTIFIED HANDLER ceph-handler : set _rbdmirror_handler_called after restart for mon0
After:
NOTIFIED HANDLER ceph-handler : mons handler for mon0
NOTIFIED HANDLER ceph-handler : osds handler for mon0
NOTIFIED HANDLER ceph-handler : mdss handler for mon0
NOTIFIED HANDLER ceph-handler : rgws handler for mon0
NOTIFIED HANDLER ceph-handler : mgrs handler for mon0
NOTIFIED HANDLER ceph-handler : rbdmirrors handler for mon0
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fe9c5b8c68)
This commit merges the two restart tasks into a single one, this way
it's one task less to notify.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 411bd07d54)
Ganesha cannot be operated active/active, in those deployments
where it is managed by pacemaker the container name can be
different than the default.
This change uses "ceph_nfs_service_suffix" where previously
missing to ensure tasks will work with customized names.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1750005
Signed-off-by: Giulio Fidente <gfidente@redhat.com>
(cherry picked from commit d2a2bd7c42)
We're using fuser command to see if a process is using a ceph unix
socket file. But the fuser command runs through every PID present in
/proc/<PID> to see if one of them is using the file.
On a system running thousands processes, the fuser command can take
a long time to finish.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717011
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit da9891da1e)
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
(cherry picked from commit ab54fe20ec)
Keywords requiring only one item shouldn't express it by creating a
list with single item.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit 739a662c80)
Conflicts:
roles/ceph-mon/tasks/ceph_keys.yml
roles/ceph-validate/tasks/check_devices.yml
Now that the container is named ceph-osd@<id> looking for something that
contains a host is not necessary. This is also backward compatible as it
will continue to match container names with hostname in them.
Signed-off-by: Sébastien Han <seb@redhat.com>
The role contains all the handlers for Ceph services. We decided to
leave ceph-defaults role with variables and a few facts only. This is
useful when organizing the site.yml files and also adding the known
variables to infrastructure-playbooks.
Signed-off-by: Sébastien Han <seb@redhat.com>
Dimitri Savineau
Guillaume Abrioux
Alex Schultz
Giulio Fidente
L3D
Rishabh Dave
Sébastien Han