The mds_name fact always gets the ansible_hostname value so we don't
need to have a dedicated fact for this and use the ansible_hostname fact
instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
In case of failure, the systemd ExecStop isn't executed so the container
isn't removed. After a reboot of a failed node, the container doesn't
start because the old container is still present in created state.
We should always try to remove the container in ExecStartPre for this
situation.
A normal reboot doesn't trigger this issue and this also doesn't affect
nodes running containers via docker.
This behaviour was introduced by d43769d.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1858865
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This changes the way we are running the podman containers via systemd.
They are now in dettached mode and Type/PIDFile set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1834974
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using docker container engine then the systemd unit scripts only
use a dependency on the docker daemon via the After parameter.
But if docker is restarted on a live system then the ceph systemd units
should wait for the docker daemon to be fully restarted.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1846830
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commits calls the `ceph_pool` module for creating ceph pools
everywhere it's needed in the playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The condition on this task is wrong, we have to check whether
`target_size_ratio` is set in the pool definition instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this commit removes the task which enable application on cephfs pools.
See: https://tracker.ceph.com/issues/43761Fixes: #5278
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When `rule_name` isn't set in `crush_rules` the osd pool creation will
fail.
This commit adds a new fact `ceph_osd_pool_default_crush_rule_name` with
the default crush rule name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1817586
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since [1] we can't use osd pool without replicas (size: 1) by default.
We now need to set the mon_allow_pool_size_one flag to true in the ceph
configuration and add the --yes-i-really-mean-it flag to the osd pool
set size cli.
[1] https://github.com/ceph/ceph/commit/21508bd
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit adds condition in order to not try to customize pools size
when its type is erasure.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the pg autoscaler support.
The structure for pool definition has now two additional attributes
`pg_autoscale_mode` and `target_size_ratio`, eg:
```
test:
name: "test"
pg_num: "{{ osd_pool_default_pg_num }}"
pgp_num: "{{ osd_pool_default_pg_num }}"
rule_name: "replicated_rule"
application: "rbd"
type: 1
erasure_profile: ""
expected_num_objects: ""
size: "{{ osd_pool_default_size }}"
min_size: "{{ osd_pool_default_min_size }}"
pg_autoscale_mode: False
target_size_ratio": 0.1
```
when `pg_autoscale_mode` is `True` user has to set a decent value in
`target_size_ratio`.
Given that it's a new feature, it's still disabled by default.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1782253
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently, the command executed is wrong, eg:
```
cmd:
- podman
- exec
- ceph-mon-controller-0
- ceph
- --cluster
- ceph
- osd
- pool
- create
- volumes
- '32'
- '32'
- replicated_rule
- '1'
delta: '0:00:01.625525'
end: '2020-02-27 16:41:05.232705'
item:
```
From documentation, the osd pool creation command is :
```
ceph osd pool create {pool-name} {pg-num} [{pgp-num}] [replicated] \
[crush-rule-name] [expected-num-objects]
ceph osd pool create {pool-name} {pg-num} {pgp-num} erasure \
[erasure-code-profile] [crush-rule-name] [expected_num_objects]
```
it means we pass '1' (from item.type) as value for
`expected_num_objects` by default which is very likely not what we want.
Also, this commit modifies the default value when no `rule_name` is set
to use the existing variable `osd_pool_default_crush_rule`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1808495
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Because we are relying on docker|podman for managing containers then we
don't need systemd to manage the process (like kill).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Configuration of cephfs with an existing cluster using --limit used to fail
at different tasks while running with site-docker.yml
This commit addresses both of those tasks
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1773489
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
[303] mktemp used in place of tempfile module
[602] Don't compare to empty string
[701] No 'galaxy_info' found
[702] Use 'galaxy_tags' rather than 'categories'
This patch also changes the ansible log_path value via the
ANSIBLE_LOG_PATH environment variable in the travis configuration to
avoid warnings.
[WARNING]: log file at /home/travis/ansible/ansible.log is not writeable
and we cannot create it, aborting
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit removes some legacy tasks.
These tasks aren't needed, they cause the playbook to fail when
collocating daemons.
Closes: #4553
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There is no need to get n * number of nodes the different keyrings.
Adding a `run_once: true` here avoid running a ceph command too many
times which could be impacting large cluster deployment.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit isolates the systemd unit files generation for containers into
separate yml files in order to be able importing each corresponding roles
without playing all tasks.
This is needed so we can run ceph-ansible to render systemd unit files
so they call podman instead of docker.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit makes it possible to parametrize the ceph directories modes.
So it changes hardocded mode for ceph related directories from 0755 to
customizable with `ceph_directories_mode` variable.
Closes: #2920
Signed-off-by: Artur Fijalkowski <artur.fijalkowski@ing.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
As SUSE 15.x and openSUSE Leap 15.x share the same base, make clear
that both are targeted by the respective tasks
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
install packages on SUSE/openSUSE distributions, using the
same logic as on RedHat-based distributions
Fixes#4340
Signed-off-by: Johannes Kastl <kastl@b1-systems.de>
The definitions of cephfs pools should match openstack pools.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Co-Authored-by: Simone Caronni <simone.caronni@teralytics.net>
When using podman, the systemd unit scripts don't have a dependency
on the network. So we're not sure that the network is up and running
when the containers are starting.
With docker this behaviour is already handled because the systemd
unit scripts depend on docker service which is started after the
network.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
This commit renames the `docker_exec_cmd` variable to
`container_exec_cmd` so it's more generic.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Except for some corner case, it's not correct to access some other
node's copy of variable docker_exec_cmd. Therefore replace
"hostvars[groups[mon_group_name][0]]['docker_exec_cmd']" by
"docker_exec_cmd".
Signed-off-by: Rishabh Dave <ridave@redhat.com>
In containerized deployment the default mds cpu quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1695850
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
this task has nothing to do in stable-4.0 and after.
Let's remove it since stable-4.0 and after aren't intended to deploy
luminous.
Closes: #3873
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to use the cephfs variable for the application pool
name because it's always cephfs.
If the cephfs variable is set to something else than the default
value it will break the appplication pool task.
Resolves: #3790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After b8d580b and e9e5d5a we could have either item.min_size or
osd_pool_default_min_size using string instead of int causing the
condition to be true when it's false.
As a result, the task could try to set the pool min_size value to
0 which leads to:
Error EINVAL: pool min_size must be between 1 and 1
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
b8d580b3f4 introduced a bug when
`min_size` isn't set (default to 0).
Typical error:
```
Error EINVAL: pool min_size must be between 1 and 1
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
instead of using `RuntimeDirectory` parameter in systemd unit files,
let's use a systemd `tmpfiles.d` to ensure `/run/ceph`.
Explanation:
`podman` doesn't create the `/var/run/ceph` if it doesn't exist the time
where the container is run while `docker` used to create it.
In case of `switch_to_containers` scenario, `/run/ceph` gets created by
a tmpfiles.d systemd file; when switching to containers, the systemd
unit file complains because `/run/ceph` already exists
The better fix would be to ensure `/usr/lib/tmpfiles.d/ceph-common.conf`
is removed and only rely on `RuntimeDirectory` from systemd unit file parameter
but we come from a non-containerized environment which is already running,
it means `/run/ceph` is already created and when starting the unit to
start the container, systemd will still complain and we can't simply
remove the directory if daemons are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When {{omit}} is concatenated with another string, it expands to something
like __omit_place_holder__63eea0d96dd6ed867b95405e11d87dddf61f448d.
However, in these use-cases we need an empty string.
Regression introduced in d53f55e807.
Signed-off-by: Leah Neukirchen <leah.neukirchen@mayflower.de>