We don't pull the monitoring container images (alertmanager, prometheus,
node-exporter and grafana) in a dedicated task like we're doing for the
ceph container image.
This means that the container image pull is done during the start of the
systemd service.
By doing this, pulling the image behind a proxy isn't working with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1995574
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5bb7240f87)
This adds ceph-*.target systemd unit files support for containerized
deployments.
This also fixes a regression introduced by PR #6719 (rgw and nfs systemd
units not getting purged)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1962748
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 09ef465f62)
Enabling lvmetad in containerized deployments on el7 based OS might
cause issues.
This commit make it possible to disable this service if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955040
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Pass the password variable via stdin for the registry login
authentication.
This allows to remove the no_log statement and see the task output
without displaying the password value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a0e1a450d3)
When using a quote in the registry password then we have the following
error:
The error was: ValueError: No closing quotation
To fix this we need to use the quote filter.
Close: https://bugzilla.redhat.com/show_bug.cgi?id=1880252
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using a http(s) proxy with either docker or podman we can rely on
the HTTP_PROXY, HTTPS_PROXY and NO_PROXY environment variables.
But with ansible, even if those variables are defined in a source file
then they aren't loaded during the container pull/login tasks.
This implements the http(s) proxy support with docker/podman.
Both implementations are different:
1/ docker doesn't rely en the environment variables with the CLI.
Thos are needed by the docker daemon via systemd.
2/ podman uses the environment variables so we need to add them to
the login/pull tasks.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1876692
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit introduces a new role `ceph-crash` in order to deploy
everything needed for the ceph-crash daemon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When a container image managed by podman isn't tag anymore then the
RepoDigests field when inspecting the image doesn't return any value.
This is different from docker workflow and it breaks the ceph-ansible
container upgrade when collocated multiple services and using a non
fix container tag (like latest or 4).
$ podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 957 MB
<none> <none> 011ee108bfc9 2 months ago 1.01 GB
$ podman inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:20cf789235e23ddaf38e109b391d1496bb88011239d16862c4c106d0e05fea9e"
$ podman inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
null
Because this field returns "null" then the ansible task trying to
determine this value is failing
-----------------------------
fatal: [foo]: FAILED! =>
msg: |-
The task includes an option with an undefined variable. The error
was: None has no element 0
The error appears to be in
'roles/ceph-container-common/tasks/fetch_image.yml': line 137,
column 3, but may be elsewhere in the file depending on the exact
syntax problem.
The offending line appears to be:
- name: set_fact ceph_osd_image_repodigest_before_pulling
^ here
-----------------------------
We don't have this behaviour with docker.
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/ceph/daemon latest 680c9c0d38c3 8 days ago 928 MB
docker.io/ceph/daemon <none> 011ee108bfc9 2 months ago 986 MB
$ docker inspect 680c9c0d38c3 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:45e6f28bb67c81b826acb64fad5c0da1cac3dffb41a88992fe4ca2be79575fa6"
$ docker inspect 011ee108bfc9 | jq .[0].RepoDigests[0]
"docker.io/ceph/daemon@sha256:b393a73309d72e43ca7d65cd3519036007947671e373eb59aa75a46185c52231"
Instead we should just get the Id field.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1844496
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This was removed in Ansible 2.9.
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of
using `result|version_compare` use `result is version_compare`. This
feature will be removed in version 2.9. Deprecation warnings can be
disabled by setting deprecation_warnings=False in ansible.cfg.
Rename 'version_compare' to the function 'version'.
version_compose was renamed to version since ansible 2.5
Signed-off-by: abaird-rh <abaird@redhat.com>
When using docker 1.13.1, the current condition:
```
{% if (container_binary == 'docker' and ceph_docker_version.split('.')[0] is version_compare('13', '>=')) or container_binary == 'podman' -%}
```
is wrong because it compares the first digit (1) whereas it should
compare the second one.
It means we always use `--cpu-quota` although documentation recommend
using `--cpus` when docker version is 1.13.1 or higher.
From the doc:
> --cpu-quota=<value> Impose a CPU CFS quota on the container. The number of
> microseconds per --cpu-period that the container is limited to before
> throttled. As such acting as the effective ceiling.
> If you use Docker 1.13 or higher, use --cpus instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When deploying with packages then the ceph-container-common role isn't
executed so the registry authentication task is ignored.
Closes: #4636
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The registry.redhat.io regsitry requires authentication so before pulling
the RHCS 4 container images from the registry we need to do the login
step.
This is done via the new ceph_docker_registry_auth variable. The
default value is false but true for RHCS setup.
When set to true, you need to provide the username and password
for the registry via the associated variables.
This patch also updates the ceph_docker_registry value for RHCS setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1748911
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
By running ceph-ansible there are a lot ``[DEPRECATION WARNING]`` like these:
```
[DEPRECATION WARNING]: evaluating containerized_deployment as a bare variable,
this behaviour will go away and you might need to add |bool to the expression
in the future. Also see CONDITIONAL_BARE_VARS configuration toggle.. This
feature will be removed in version 2.12. Deprecation warnings can be disabled
by setting deprecation_warnings=False in ansible.cfg.
```
Now appended ``| bool`` on a lot of the affected variables.
Sometimes the coding style from ``variable|bool`` changed to ``variable | bool`` *(with spaces at the pipe)*.
Closes: #4022
Signed-off-by: L3D <l3d@c3woc.de>
the rhel8 image used is an outdated beta version, it is not worth it to
maintain this image upstream, since it's possible to test podman with a
newer version of centos/atomic-host image.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit splits the current `ceph-container-common` role.
This introduces a new role `ceph-container-engine` which handles the
tasks specific to the installation of containers tools (docker/podman).
This is needed for the ceph-dashboard implementation for 2 main reasons:
1/ Since the ceph-dashboard stack is only containerized, we must install
everything needed to run containers even in non containerized
deployments. Splitting this role allows us to not have to call the full
`ceph-container-common` role which would run a bunch of unneeded tasks
that would have been skipped anyway.
2/ The current implementation would have required to run
`ceph-container-common` on all ceph-clients nodes which would have been
conflicting with 9d3517c670 (we don't want
to run ceph-container-common on all client nodes, see mentioned commit
for more details)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using a minimal Debian/Ubuntu distribution there's no
ca-certificates and gpg packages installed so the apt modules will
fail:
Failed to find required executable gpg in paths:
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
apt.cache.FetchFailedException:
W:https://download.ceph.com/debian-luminous/dists/bionic/InRelease:
No system certificates available. Try installing ca-certificates.
Resolves: #3994
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit will merge dashboard-ansible installation scripts with
ceph-ansible. This includes several new roles to setup ceph-dashboard
and the underlying technologies like prometheus and grafana server.
Signed-off-by: Boris Ranto & Zack Cerza <team-gmeno@redhat.com>
Co-authored-by: Zack Cerza <zcerza@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Currently podman installation is very tied to RHEL 8 even if we're
able to install it on Debian/Ubuntu distribution.
This patch changes the way we are starting or not the (fat) container
daemon. Before the condition was based on the distribution release
and now on the container_service_name variable.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Until now it was not possible to install a specific container package
because it was somehow hardcoded.
This patch allows to override the container package name (docker.io
vs docker-ce) and refacts the package installation. This could be
achieve via the container_package_name variable.
Instead of using one task per distribution we can set the package and
service name in vars. This allows to have a unified package task.
Also refactorize the debian_prerequisites tasks because the content
was outdated.
https://docs.docker.com/install/linux/docker-ce/debian/https://docs.docker.com/install/linux/docker-ce/ubuntu/Resolves: #3609
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently we only support ansible 2.7
We plan to use 2.8 when it will be release so we have to support both
2.7 and 2.8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1700548
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
docker daemon is automatically started during package installation
but the service isn't enabled on boot.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When installing python-minimal on Ubuntu bionic, this will add the
/usr/bin/python symlink to the default python interpreter.
On bionic, this isn't python2 but python3.
$ /usr/bin/python --version
Python 3.6.7
The python docker library is only installed for python2 which causes
issues when running the purge-docker-cluster playbook. This playbook
uses the ansible docker modules and requires to have python bindings
installed on the remote host.
Without the bindings we can see python error reported by the docker
module.
msg: Failed to import docker or docker-py - No module named 'docker'.
Try `pip install docker` or `pip install docker-py` (Python 2.6)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
instead of using `RuntimeDirectory` parameter in systemd unit files,
let's use a systemd `tmpfiles.d` to ensure `/run/ceph`.
Explanation:
`podman` doesn't create the `/var/run/ceph` if it doesn't exist the time
where the container is run while `docker` used to create it.
In case of `switch_to_containers` scenario, `/run/ceph` gets created by
a tmpfiles.d systemd file; when switching to containers, the systemd
unit file complains because `/run/ceph` already exists
The better fix would be to ensure `/usr/lib/tmpfiles.d/ceph-common.conf`
is removed and only rely on `RuntimeDirectory` from systemd unit file parameter
but we come from a non-containerized environment which is already running,
it means `/run/ceph` is already created and when starting the unit to
start the container, systemd will still complain and we can't simply
remove the directory if daemons are collocated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
With 'podman version 1.0.0' on RHEL8 beta the 'get ceph version' and
'ceph monitor mkfs' commands fail [1] with "error configuring network
namespace for container Missing CNI default network".
When net=host is added these errors are resolved. net=host is used in
many other calls (grep -R net=host | wc -l --> 38).
Fixes: #3561
Signed-off-by: John Fulton <fulton@redhat.com>
(cherry picked from commit 410abd7745)
- also add `--foreground` which seems to fix some issue we are facing when
using timeout with `podman`.
- use this fact in the `is ceph running already?` task.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If user sets "docker_pull_timeout: '0'" then do not use the
timeout command when running podman/docker pull. Also, use
"timeout -s KILL"; without KILL, podman on RHEL8 beta does
not timeout and deployment can hang.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1670625
Signed-off-by: John Fulton <fulton@redhat.com>
Make linter happy and add more robustness to remote tasks by retrying 3
times (the default) before failing.
Signed-off-by: Sébastien Han <seb@redhat.com>
This removes a bit of unnecessary code, the check was always wrong
because of the condition 'not ceph_current_status.get('rc', 1) == 0'
It will never match since `Not` is used for bool and we are checking for
an rc.
Also, even though the check would work, this will be a major blocker for
a complete meltdown. If the whole platform is shutdown then nothing will
be up but files will be present, so this check is definitely wrong.
Signed-off-by: Sébastien Han <seb@redhat.com>
This will fix the following yamllint warning:
Variables should have spaces after {{ and before }}
Signed-off-by: Christian Berendt <berendt@betacloud-solutions.de>
Dimitri Savineau
Guillaume Abrioux
VasishtaShastry
abaird-rh
L3D
Boris Ranto
Rishabh Dave
John Fulton
Sébastien Han
Christian Berendt