Commit Graph

32 Commits (6dce51183bda78e2d7ce689c5e0a7bb2f9629f47)

Author SHA1 Message Date
Kyle Bader 0bee90b201 rgw: add cpuset support
1/ The OSD already supports cpuset to be used for containerized deployments
through the use of the ceph_osd_docker_cpuset_cpus variable. This adds similar
support to the RGW service for containerized deployments by setting a new
variable named ceph_rgw_docker_cpuset_cpus. Like the OSD, there are times where
using distinct cores has advantages over using the CFS in kernel scheduler.

ceph_rgw_docker_cpuset_cpus accepts a comma delimited set of CPU ids

2/ Add support for specifying --cpuset-mem variable to restrict the cgroup's memory
allocations to a particular numa node, which should typically correspond with
the cpu ids of that numa node that were provided with --cpuset-cpus. To ensure
the correct cpu ids are used one can run `numactl --hardware`  to list the nodes
and which cpu ids correspond to each.

Signed-off-by: Kyle Bader <kbader@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
2019-04-18 15:55:19 +02:00
Dimitri Savineau d3ae9fd05f radosgw: Raise cpu limit to 8
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171

Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2019-04-04 18:50:48 +02:00
Guillaume Abrioux 34275ac847 rgw: move multisite default variables in ceph-defaults
Move all rgw multisite variables in ceph-defaults so ceph-validate can
go through them.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2018-10-30 17:41:05 +01:00
Ali Maredia 59e6d04f9b rgw: add ceph-validate tasks for multisite, other fixes
- updated README-MULTISITE
- re-added destroy.yml
- added tasks in ceph-validate to make sure the
rgw multisite vars are set

Signed-off-by: Ali Maredia <amaredia@redhat.com>
2018-10-30 14:00:28 +01:00
Guillaume Abrioux 77d5d128c3 rgw: add a dedicated variable for multisite endpoint
We should give users the possibility to set the IP they want as
multisite endpoint, setting the default value to `{{ ansible_fqdn }}` to
not force them to set this variable.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2018-10-30 14:00:28 +01:00
Ali Maredia 474f151450 rgw: update rgw multisite tasks
- remove destroy tasks
- cleanup conditionals and syntax
- remove unnecessary realm pulls
- enable multisite to be tested in automated
testing infra
- add multisite related vars to main.yml and
group_vars
- update README-MULTISITE
- ensure all `radosgw-admin` commands are being run
on a mon

Signed-off-by: Ali Maredia <amaredia@redhat.com>
2018-10-30 14:00:28 +01:00
Guillaume Abrioux 748342f5b6 roles: fix *_docker_memory_limit default value
append 'm' suffix to specify the unit size used in all
`*_docker_memory_limit`.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2018-10-29 14:59:09 +01:00
Neha Ojha b7e4d4eb84 roles: do not limit docker_memory_limit for various daemons
Since we do not have enough data to put valid upper bounds for the memory
usage of these daemons, do not put artificial limits by default. This will
help us avoid failures like OOM kills due to low default values.

Whenever required, these limits can be manually enforced by the user.

More details in
https://bugzilla.redhat.com/show_bug.cgi?id=1638148

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1638148
Signed-off-by: Neha Ojha <nojha@redhat.com>
2018-10-29 14:59:09 +01:00
Guillaume Abrioux cd3d6409fe resync group_vars/*.sample files
ee2d52d33d missed this sync between
ceph-defaults/defaults/main.yml and group_vars/all.yml.sampl

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2018-10-26 08:44:08 +00:00
Sébastien Han 4d64dd4686 rgw: ability to use ceph-ansible vars into containers
Since the container now simply reads the ceph.conf, we remove all the
unnecessary options.

Also this PR is the foundation to support multiple backend, such as the
new 'beast' from Ceph Mimic.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1582411
Signed-off-by: Sébastien Han <seb@redhat.com>
2018-08-09 14:13:17 +02:00
jtudelag 600e1e2c26 rgws: renames create_pools variable with rgw_create_pools.
Renamed to be consistent with the role (rgw) and have a meaningful name.

Signed-off-by: Jorge Tudela <jtudelag@redhat.com>
2018-06-04 06:23:42 +02:00
Sébastien Han 1c084efb3c rgw: container add option to configure multi-site zone
You can now use RGW_ZONE and RGW_ZONEGROUP on each rgw host from your
inventory and assign them a value. Once the rgw container starts it'll
pick the info and add itself to the right zone.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1551637
Signed-off-by: Sébastien Han <seb@redhat.com>
2018-05-24 11:32:05 -07:00
Sébastien Han 2ea7f287fa docker: simplify variable declaration
Less configuration for the user, the container inherit from the global
variables. No more container specific variables.

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-09-09 01:22:06 +02:00
Sébastien Han 2fa151b9e8 container: introduce resource limitation for containers
This can be controlled via 2 options:

* ceph_$DAEMON_docker_memory_limit
* ceph_$DAEMON_docker_cpu_limit

All daemons default to 1GB for memory and 1 CPU by default.
Recommendations from:
https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html/red_hat_ceph_storage_hardware_guide/minimum_recommendations

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-09-06 14:52:21 +02:00
Keith Schincke eaccc12797 Update ceph_rgw_docker_extra_env to add bind ip
This patch adds passing the RGW_CIVETWEB_IP to the docker
container. This IP defaults to the value of radosgw_civetweb_bind_ip.
radosgw_civetweb_bind_ip default to ipv4.default

Without this value, the RGW containter will bind to 0.0.0.0
2017-08-31 15:50:34 +02:00
SirishaGuduru 1359869497 Common: changed civetweb line in rgw section(conf)
Resolves issue: Multiple RGW Ceph.conf Issue #1258

In multi-RGW setup, in ceph.conf the RGW sections
contain identical bind IP in civetweb line. So this
modification fixes that issue and puts the right IP
for each RGW.

Signed-off-by: SirishaGuduru SGuduru@walmartlabs.com

Modified ceph-defaults and ran generate_group_vars_sample.sh

group_vars/osds.yml.sample and group_vars/rhcs.yml.sample are
not part of the changes. But they got modified when
generate_group_vars_sample.sh is ran to generate group_vars/
all.yml.sample.

Uncommented added variables in ceph-defaults

Updated tests by adding value for radosgw_interface

Added radosgw_interface to centos cluster tests

Modified ceph-rgw role,rebased and ran generate_group_vars_sample.sh

In ceph-rgw role removed check_mandatory_vars.yml.
Rebased on master.
Ran generate_group_vars_sample.sh and then the below files got
modified.
2017-08-23 15:03:37 +05:30
Andy McCrae 4671b9e74e Allow ceph service systemd overrides to be specified
ceph services can fail to start under certain circumstances (for
example, when running in a container) because the default systemd
service configuration causes namespace issues.

To work around this we can override the system service settings by
placing an overrides file in the ceph-<service>@.service.d directory.
This can be generic so as to allow any potential changes required to
the ceph-<service> service files.

The overrides file is only setup when the
"ceph_<service>_systemd_overrides" config_template override variable is
specified.

The available service systemd override files are as follows:
ceph_mds_systemd_overrides
ceph_mgr_systemd_overrides
ceph_mon_systemd_overrides
ceph_osd_systemd_overrides
ceph_rbd_mirror_systemd_overrides
ceph_rgw_systemd_overrides
2017-08-16 17:57:06 +01:00
Sébastien Han afa29889c1 ceph-docker-common: update etcd kv port
New registered port is 2379

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-07-24 15:40:44 +02:00
John Fulton 73633f05a0 Allow user to define ACLs for OpenStack keys
The keys and openstack_keys structure now supports an optional
key called acls whose value is a list of strings one could pass
to setfacl. The ansible ACL module applies the ACLs to all
openstack keys with this property.

Fixes: #1688
2017-07-20 13:20:16 +00:00
Guillaume Abrioux 7e1df484db Mon: Allow to deploy with custom admin secret
Add a new parameter `admin_secret` that allow to deploy a ceph cluster
with a custom admin secret.

Fix: #1630

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-07-05 14:57:49 +02:00
Christian Zunker 0050f8e6ef Create OpenStack pools with crush rule
Add an extra variable to the openstack pools, which creates them with
defined rules. This will allow to place different pools on e.g.
different type of disks.

This commit will also set a new default rule when defined and move
the rbd pool to the new rule.
2017-07-03 15:30:38 +02:00
Guillaume Abrioux ddfe019342 Refact code
`ceph-docker-common`:
  At the moment there is a lot of duplicated tasks in each
  `./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
  `./roles/ceph-docker-common/tasks/main.yml`.

`*_containerized_deployment` variables:
  All `*_containerized_deployment` have been refactored to a single
  variable `containerized_deployment`

duplicate `cephx` variables in `group_vars/* have been removed.

Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
2017-05-24 15:55:41 +02:00
Sébastien Han 2106745343 rgw: resync group_vars
At some point, during a commit changing `roles/ceph-rgw/defaults/main.yml`
we forgot to run `generate_group_vars_sample.sh`.

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-05-15 15:52:57 +02:00
Ali Maredia 5192e3cd6d rgw: set tuning parameters
Change civetweb_num_thread default to 100

Add capability to override number of pgs for
rgw pools.

Add ceph.conf vars to enable default bucket
object quota at users choosing into the ceph.conf.j2
template

Resolves: rhbz#1437173
Resolves: rhbz#1391500

Signed-off-by: Ali Maredia <amaredia@redhat.com>
2017-04-25 16:01:03 -04:00
Sébastien Han 88c6296fa2 rgw: remove sudoers file
This was needed for Hammer and older version, not needed anymore since
we have a 'ceph' user to run ceph processes.

Signed-off-by: Sébastien Han <seb@redhat.com>
2017-03-02 14:59:21 +01:00
Sébastien Han c2f1dca823 docker: use a better method to pull images
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".

Variables have been simplified with only:

* ceph_docker_image
* ceph_docker_image_tag

1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.

2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.

Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
2017-02-09 17:57:18 +01:00
Chris Wells adb7d868f6
re-regenerated group vars 2017-01-07 09:33:56 -05:00
Chris Wells d609dca7a6
Updated pull[port|proto] to pull_[port|proto] and regenerated base group vars 2017-01-07 09:33:24 -05:00
Sébastien Han 2d8ac4a586 docker: only use systemd to manage containers
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.

Signed-off-by: Sébastien Han <seb@redhat.com>
2016-12-16 19:37:05 +01:00
Sébastien Han ce7431a227 docker: add support for cluster name
We need to honour the cluster name that was chosen by ceph-ansible and
pass it to ceph-docker.

Signed-off-by: Sébastien Han <seb@redhat.com>
2016-12-16 14:31:21 +01:00
Sébastien Han 75cb749570 docker: consolidate ceph-ansible and ceph-docker varible
This commit re-uses some of the existing ceph-ansible variables for a
containirzed deployment. There is no reasons why we should add new
variables for the containerized deployment.

Signed-off-by: Sébastien Han <seb@redhat.com>
2016-12-09 14:39:05 +01:00
Guillaume Abrioux a680707f6f All `include_vars` need to have `*.yml`, `*.yaml` or `*.json` extension.
As introduced in the following PR:
- https://github.com/ansible/ansible/pull/17207
we need to refactor our code.
2016-11-24 14:03:49 +01:00