All keyring are getting copied to all nodes.
This commit fixes a leftover from a previous code refactor.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1498583
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is to ensure `docker_exec_cmd` fact is set with the correct value
in case of daemons collocation
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Using systemd module allows us to do in one task what we did in three
tasks:
- enable unit file,
- issue a `daemon-reload`,
- start the service
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This fixes the error :
```
The conditional check 'sestatus.stdout != 'Disabled'' failed.
```
that occurs when running on non rhel based system since the
`sestatus` fact is registered only on rhel based distribution.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We generate the ceph.conf on all the nodes through the
ceph-docker-common so there is no need to push it to the Ansible file.
Also this is breaking the ceph.conf template generation since we only
generate sections based on the host the ansible task is running on.
For example, what's typically happening, we bootstrap the monitor, we
get a ceph.conf generated for a mon only, we go on an osd, we generate
the ceph.conf with osd section (done by ceph-docker-common) but this
gets overwritten by the copy_config task of the ceph-osd role.
Signed-off-by: Sébastien Han <seb@redhat.com>
When Ansible is not run with verbose options it's difficult to see which
include and/or set_fact does what. So adding a name for each clarifies.
Signed-off-by: Sébastien Han <seb@redhat.com>
All keys are copied to all nodes.
This commit split that task in each roles so keys are copied to their
respective nodes.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1488999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Prior to this patch this activation sequence for autodetection was
always skipped because we were asking to activate on device without
partitions, which doesn't make sense.
We also fix the way we lookup for a device, since the data partition is
always numbered 1, we take the min element of the dict.
Closes: https://github.com/ceph/ceph-ansible/issues/1782
Signed-off-by: Sébastien Han <seb@redhat.com>
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The script can fail to get the osd id because the osds are activated by
udev and it can take a while for them to activate. This commit fixes
that by trying to get all the osds per node in a loop.
This commit also makes the osd services enabled so that they are
available after reboot.
Signed-off-by: Boris Ranto <branto@redhat.com>
The lvm_volumes variable is now a list of dictionaries that represent
each OSD you'd like to deploy using ceph-volume. Each dictionary must
have the following keys: data, journal and data_vg. Each dictionary also
can optionaly provide a journal_vg key.
The 'data' key represents the lv name used for the OSD and the 'data_vg'
key is the vg name that the given lv resides on. The 'journal' key is
either an lv, device or partition. The 'journal_vg' key is optional and
must be the vg name for the journal lv if given. This key is mainly used
for purging of the journal lv if purge-cluster.yml is run.
For example:
lvm_volumes:
- data: data_lv1
journal: journal_lv1
data_vg: vg1
journal_vg: vg2
- data: data_lv2
journal: /dev/sdc
data_vg: vg1
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
To be properly evaluated the "skipped" conditions must always have the
first place on the list of condition, otherwise the other conditions are
evaluated before and make the task fail.
Closes: https://github.com/ceph/ceph-ansible/issues/1733
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph services can fail to start under certain circumstances (for
example, when running in a container) because the default systemd
service configuration causes namespace issues.
To work around this we can override the system service settings by
placing an overrides file in the ceph-<service>@.service.d directory.
This can be generic so as to allow any potential changes required to
the ceph-<service> service files.
The overrides file is only setup when the
"ceph_<service>_systemd_overrides" config_template override variable is
specified.
The available service systemd override files are as follows:
ceph_mds_systemd_overrides
ceph_mgr_systemd_overrides
ceph_mon_systemd_overrides
ceph_osd_systemd_overrides
ceph_rbd_mirror_systemd_overrides
ceph_rgw_systemd_overrides
This scenario will create OSDs using ceph-volume and is only available
in ceph releases greater than Luminous.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
There is only two main scenarios now:
* collocated: everything remains on the same device:
- data, db, wal for bluestore
- data and journal for filestore
* non-collocated: dedicated device for some of the component
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph-disk is responsable for enabling the unit file if needed. Actually
since https://github.com/ceph/ceph/pull/12241 it seems that it's not
even needed. On an event of a restart, udev rules will be trigger and
they will ceph-disk activate the device too so the 'enabled' is not
needed.
Closes: https://github.com/ceph/ceph-ansible/issues/1142
Signed-off-by: Sébastien Han <seb@redhat.com>
We have multiple issues with ceph-disk's cli with bluestore and Ceph
releases. This is mainly due to cli changes with Luminous. Luminous
introduced a --bluestore and --filestore options which respectively does
not exist on releases older than Luminous. The default store being
bluestore on Luminous, simply checking for the store is not enough so we
have to build a specific command line for ceph-disk depending on the
Ceph version we are running and the desired osd_store.
Signed-off-by: Sébastien Han <seb@redhat.com>
In Luminous, ceph-disk defaults to bluestore so all our scenarios are
using bluestore, we need to force testing both.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Fail with a sane message if the devices or raw_journal_devices variables
are strings instead of lists during manual device assignment.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
This commits refactors how we deploy bluestore. We have existing
scenarios that we don't want to change too much. This commits eases the
user experience by now changing the way you use scenarios. Bluestore is
just a different interface to store objects but the scenarios more or
less remain the same.
If you set osd_objectstore == 'bluestore' along with
journal_collocation: true, you will get an OSD running bluestore with DB
and WAL partitions on the same device.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true, you will get an OSD running bluestore with a
dedicated drive for the rocksdb DB, then the remaining
drives (used with 'devices') will have WAL and DATA collocated.
If you set osd_objectstore == 'bluestore' along with
raw_multi_journal: true and declare bluestore_wal_devices you will get
an OSD running bluestore with a dedicated drive for rocksdb db, a
dedicated drive partition for rocksdb WAL and a dedicated drive for
DATA.
Signed-off-by: Sébastien Han <seb@redhat.com>
There is no need for 2 variables to enable bluestore, prior to this
patch one had to do the following to activate bluestore:
osd_objectstore: bluestore
bluestore: true
Now you just need to set `osd_objectstore: bluestore`.
Fixes: https://github.com/ceph/ceph-ansible/issues/1475
Signed-off-by: Sébastien Han <seb@redhat.com>
Followup on https://github.com/ceph/ceph-ansible/pull/1469 where we
merged most of the container code from roles/ceph-*/task/docker/*.yml
into roles/ceph-docker-common/tasks/
It seems that we forgot to remove the original files.
Signed-off-by: Sébastien Han <seb@redhat.com>
`ceph-docker-common`:
At the moment there is a lot of duplicated tasks in each
`./roles/ceph-<role>/tasks/docker/main.yml` that could be refactored in
`./roles/ceph-docker-common/tasks/main.yml`.
`*_containerized_deployment` variables:
All `*_containerized_deployment` have been refactored to a single
variable `containerized_deployment`
duplicate `cephx` variables in `group_vars/* have been removed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to `196fa7e` this commit check if a container has been
already launched and delete it before retrying the ceph osd prepare
process.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Proof-of-concept clusters or actual production clusters will never want to use this. We also do not test it anywhere for this same reason.
Signed-off-by: Gregory Meno <gmeno@redhat.com>
Ansible's assemble module by default will put all files in the src
directory together into dest. We only want to put {{ cluster }}.conf
and osd.conf together, not anything that might have found its way into
/etc/ceph/ceph.d (e.g. files left by the sysadmin taking backups
before an ansible run). So specify a regexp that matches only those
two files.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
As reported in
https://github.com/ceph/ceph-ansible/issues/1403 when devices are held
by lvm and `osd_auto_discovery` is set to true, it's not enough to check
for a partition count = 0 since Ansible does not report.
This patch also looks for 'holders' which in a case of lvm corresponds
to the name of the pv. Now we also look for holders = 0.
Fixes: #1403
Signed-off-by: Sébastien Han <seb@redhat.com>
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
Install package from official repos rather than pip when using RHEL.
This commit fix https://bugzilla.redhat.com/show_bug.cgi?id=1420855
Also this commit Refact all `roles/ceph-*/tasks/docker/pre_requisite.yml`
to avoid a lot of duplicated code.
Fix: #1303
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since distro will not allow /usr/share to be writable (e.g: atomic) so
we let the operator decide where to put that script.
Signed-off-by: Sébastien Han <seb@redhat.com>
Oh yeah! This patch adds more fine grained control on how we run the
activation osd container. We now use --device to give a read, write and
mknodaccess to a specific device to be consumed by Ceph. We also use
SYS_ADMIN cap to allow mount operations, ceph-disk needs to temporary
mount the osd data directory during the activation sequence.
This patch also enables the support of dedicated journal devices when
deploying ceph-docker with ceph-ansible.
Depends on https://github.com/ceph/ceph-docker/pull/478
Signed-off-by: Sébastien Han <seb@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we now only support systemd has an init system we can finally
treat containers as processes using systemd and this for all the
distros.
Signed-off-by: Sébastien Han <seb@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Sometimes users for testing, tend to delete the whole /var/lib/ceph and
then run ansible again, OSD will never come up if we do not create their
directory.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to this patch we had several ways to runs containers, we could use
ansible's docker module on some distro and on containers distros we were
using systemd. We strongly believe threating containers as services with
systemd is the right approach so this patch generalizes to all the
distros. These days most of the distros are running systemd so it's fair
assumption.
Signed-off-by: Sébastien Han <seb@redhat.com>
Refactor the code using 'package' module
Fix Issue #520
(However it doesn't cover all cases because some cases are not refactorable.
Ex: because of diverging packages name between distribution)
Ansible task was not properly fetching OSD cluster keyring causing
the keyring to be missing when we needed to authenticate. Similarly, we
were not properly waiting on the OSD keyring to be available before
continuing.
Signed-off-by: Ivan Font <ifont@redhat.com>
- Update rolling update playbook to support containerized deployments
for mons, osds, mdss, and rgws
- Skip checking if existing cluster is running when performing a rolling
update
- Fixed bug where we were failing to start the mds container because it
was missing the admin keyring. The admin keyring was missing because
it was not being pushed from the mon host to the ansible host due to
the keyring not being available before running the copy_configs.yml
task include file. Now we forcefully wait for the admin keyring to be
generated before continuing with the copy_configs.yml task include file
- Skip pre_requisite.yml when running on atomic host. This technically
no longer requires specifying to skip tasks containing the with_pkg tag
- Add missing variables to all.docker.sample
- Misc. cleanup
Signed-off-by: Ivan Font <ifont@redhat.com>
Even for dmcrypt we need to check the "devices" status and
"raw_journal_devices" as well so we can fix them if there is something
wrong with them.
Signed-off-by: Sébastien Han <seb@redhat.com>
This allows us to test devices set with persistent naming such as
/dev/disk/by-*
When registering devices we can use persisent (/dev/disk/by-*) or
non-persistent (/dev/sd*). Both declarations are supported by
ceph-ansible. There was just two tasks that were not compatible with
this. Since we support using partitions directly we need to test that
because the device activation will be different. To test if the device
is a partition we use a regular expression which wasn't compatible with
the persistent device naming format (/dev/disk/by-*).
This commit solves this issue by reading the path of the symlink since
devices like /dev/disk/by-* are symlinks to devices like /dev/sd*
Signed-off-by: Sébastien Han <seb@redhat.com>
use the activation scenario instead of the full ceph_disk one, we
already have a task to prepare osds so we just need to activate the
device.
working for me using vagrant :)
Signed-off-by: Sébastien Han <seb@redhat.com>
* changed s/colocation/collocation/
* declare dmcrypt variable in ceph-common so the variables check does
not fail
Signed-off-by: Sébastien Han <seb@redhat.com>
This fixes#845 for containerized deployments. We now also mount the
/etc/localtime volume in the containers in order to synchronize the host
timezone with the container timezone.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Update each role's task to use the respective role's username, image
name, and image tag to check if a container is already running. This was
causing false failures because we were not matching any running
containers and subsequently running checks.yml to check the status of
cluster files being left behind.
Signed-off-by: Ivan Font <ivan.font@redhat.com>
Docker makes it difficult to use images that are not on signed
registries. This is a problem for developers, who likely won't have
access to a registry with proper signed certificates.
This allows the ability to use any docker image on the machine running
vagrant/ansible. The way it works is that the image in question is
exported locally, then sent to each target box and imported there.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
In order to align all Ansible versions, we now use the full path for the
template. We rely on `role_path` variable. Now all the tasks using
the template module have a uniform syntax.
Might fix issue raised in #483
Signed-off-by: Sébastien Han <seb@redhat.com>
This is purely a refactor. Converts when 'and' conditionals into lists
rather than multiline strings. This does not work for nested
conditionals, but those can be formated with indents.
Moves one line when statements onto the same line as the when command
itself.
A small logic bug was found in ceph-osd/tasks/check_devices.yml which
which was also fixed.
Signed-off-by: Sam Yaple <sam@yaple.net>
The ceph-osd role currently uses ansible_service_mgr, which is a fact
only available on ansible 2.x and greater. This commit sets a similar
fact called init_system which will store the contents of /proc/1/comm
(systemd, init, etc.) and then references it ceph-osd instead.
Closes#741
If the ceph cluster name includes numbers, the grep used to find the OSD
IDs from /var/lib/ceph/osd/ would also return the numbers that were in
the cluster name.
For example, if the cluster was named 'mine123' and there was only one
OSD on the node, then the task that finds the OSD IDs would return
'123' and '0'.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
We now check if the device has already been prepared, if we detect a
ceph partition we do not prepare the device.
Also fixed some issues while running on Atomic or CoreOS.
Signed-off-by: Sébastien Han <seb@redhat.com>
fixing the can't open /var/lib/ceph/bootstrap-osd/ceph.keyring: can't
open /var/lib/ceph/bootstrap-osd/ceph.keyring: (13) Permission denied
Signed-off-by: Sébastien Han <seb@redhat.com>
we now have the ability to enable the `cluster` variable with a specific
value that will determine the name of the cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
With Jewel comes a new store to store Ceph object: BlueStore. Adding an
extra scenario might seem like a useless duplication however the
ultimate goal is remove the other roles later. Thus this is easier to
add new role instead of modifying existing one. Once we drop the support
for release older than Jewel we will just remove all the previous
scenario files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we want to activate the OSD when it's a partition we are looking
for a return code that is equal to 0 which means the device is a
partition.
closes: #636
Signed-off-by: Sébastien Han <seb@redhat.com>
Michel Rode
Guillaume Abrioux
Sébastien Han
Andrew Schoen
Boris Ranto
Andy McCrae
yanyx
Douglas Fuller
Austin Workman
Andrew Schoen
Pascal Watteel
David Galloway
Alberto Murillo
Gregory Meno
Matthew Vernon
Daniel Horak
Tobias Florek
Shengjing Zhu
Daniel Marks
Ivan Font
Eduard Egorov
Adam Huffman
Adam Huffman
Simon Weald
Musee Ullah
James Saint-Rossy
Daniel Gryniewicz
Ivan Font
Chengwei Yang
pprokop
KGoreczny
Christoph Dwertmann
Erik Hollensbe
Austin Brown
Huamin Chen
Alfredo Deza
Marcus Pamelia
Sam Yaple
Matt Thompson
Ivo Jimenez
Jim Curtis
pprokop
Jim Curtis