When adding a new monitor, we must reuse the existing initial monitor
keyring. Otherwise, the new monitor will issue its 'mkfs' with a new
monitor keyring and it will result with a mismatch between them. The
new monitor will be unable to join the quorum in the end.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit edf1ee2073)
these files aren't needed anymore since we only use lvm scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4f68462009)
This variable was related to ceph-disk scenarios.
Since we are entirely dropping ceph-disk support as of stable-4.0, let's
remove this variable.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f0416c8892)
As of stable-4.0, the only valid scenario is `lvm`.
Thus, this makes this variable useless.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d35e9eeed)
ceph_disk_cli_options_facts.yml is not used anymore, let's remove it.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 4d5637fd8a)
We only validate the devices that are passed if there is a list of
devices to validate.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 2888c0825f)
osd_scenario has become obsolete and defaults to lvm. With lvm there is
no such things has collocated and non-collocated.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 52df15895b)
ceph-disk is not supported anymore, so all the newly created OSDs will
be configured using ceph-volume.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 9ea1e49407)
We don't support the preparation of OSD with ceph-disk. ceph-volume is
only supported. However, the start operation of OSD is still supported.
So let's say you change a config option, the handlers will be able to
restart all the OSDs via their respective systemd unit files.
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e2a5aa062e)
We don't need to use the cephfs variable for the application pool
name because it's always cephfs.
If the cephfs variable is set to something else than the default
value it will break the appplication pool task.
Resolves: #3790
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d2efb7f02b)
ceph-volume didn't work when the devices where passed by path.
Since it now support it, let's allow this feature in ceph-ansible
Closes: #3812
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e0adca7a4)
As discussed in ceph/ceph#26599, beast is now the default frontend
for rados gateway with nautilus release.
Add rgw_thread_pool_size variable with 512 as default value and keep
backward compatibility with num_threads option when using civetweb.
Update radosgw_civetweb_num_threads to reflect rgw_thread_pool_size
change.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d17b1b48b6)
Let's use a condition to run this task only on the first mon.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 631e5d3144)
The Ubuntu Cloud Archive-related (UCA) defaults in
roles/ceph-defaults/defaults/main.yml were commented out, which means
if you set `ceph_repository` to "uca", you get undefined variable
errors, e.g.
```
The task includes an option with an undefined variable. The error was: 'ceph_stable_repo_uca' is undefined
The error appears to have been in '/nfs/users/nfs_m/mv3/software/ceph-ansible/roles/ceph-common/tasks/installs/debian_uca_repository.yml': line 6, column 3, but may
be elsewhere in the file depending on the exact syntax problem.
The offending line appears to be:
- name: add ubuntu cloud archive repository
^ here
```
Unfortunately, uncommenting these results in some other breakage,
because further roles were written that use the fact of
`ceph_stable_release_uca` being defined as a proxy for "we're using
UCA", so try and install packages from the bionic-updates/queens
release, for example, which doesn't work. So there are a few `apt` tasks
that need modifying to not use `ceph_stable_release_uca` unless
`ceph_origin` is `repository` and `ceph_repository` is `uca`.
Closes: #3475
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 9dd913cf8a)
docker daemon is automatically started during package installation
but the service isn't enabled on boot.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 37816570c6)
Add a tox scenario that adds an new MDS node as a part of already
deployed Ceph cluster and deploys MDS there.
Signed-off-by: Rishabh Dave <ridave@redhat.com>
(cherry picked from commit c0dfa9b61a)
When using monitor_address_block or radosgw_address_block variables
to configure the mon/rgw address we're getting the first ip address
from the ansible facts present in that cidr.
When there's VIP on that network the first filter could return the
wrong value.
This seems to affect only IPv6 setup because the VIP addresses are
added to the ansible facts at the beginning of the list. This is the
opposite (at the end) when using IPv4.
This causes the mon/rgw processes to bind on the VIP address.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680155
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fd4b0ec7eb)
The path of the RGW environment file (in the /var/lib/ceph/radosgw/
directory) depends on the Ceph clustername. It was not taken into
account in the Ansible role `ceph-rgw`.
Signed-off-by: flaf <francois.lafont.1978@gmail.com>
(cherry picked from commit 4c3e77d869)
When mgrs are implicitly collocated on monitors (no mgrs in mgrs group).
That include was skipped because of this condition :
`inventory_hostname == groups[mgr_group_name][0]`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit cbfdbab177)
before managing mgr modules, we must ensure all mgr are available
otherwise we can hit failure like following:
```
stdout:Error ENOENT: all mgr daemons do not support module 'restful', pass --force to force enablement
```
It happens because all mgr are not yet available when trying to manage
with mgr modules.
Closes: #3100
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f596cc1711)
According to rdo testing https://review.rdoproject.org/r/#/c/18721
a check on the output of the ceph_health value is added to
allow the playbook to make several attempts (according to the
retry/delay variables) when waiting the cluster quorum or
when the container bootstrap is not ended.
It avoids the failure of the command execution when it doesn't
receive a valid json object to decode (because cluster is too
slow to boostrap compared to ceph-ansible task execution).
Signed-off-by: fpantano <fpantano@redhat.com>
(cherry picked from commit afbb90e4ac)
In containerized deployment the default radosgw quota is too low
for production environment.
This is causing performance degradation compared to bare-metal.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1680171
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d3ae9fd05f)
Since https://github.com/ceph/ceph/commit/77912c0 ceph-volume uses
stdout encoding based on LC_CTYPE and PYTHONIOENCODING environment
variables.
Thoses variables aren't set when using ansible.
Currently this commit breaks non containerized deployment on Ubuntu.
TASK [use ceph-volume to create bluestore osds] ********************
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- create
- --bluestore
- --data
- /dev/sdb
rc: 1
stderr: |-
Traceback (most recent call last):
(...)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in
position 132: ordinal not in range(128)
Note that the task is failing on ansible side due to the stdout
decoding but the osd creation is successful.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 7e5e4229b7)
Similar to #3658
Since there's too many changes between master and stable branches let's
commit directly in each branches instead of trying to backport this
commit.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When installing python-minimal on Ubuntu bionic, this will add the
/usr/bin/python symlink to the default python interpreter.
On bionic, this isn't python2 but python3.
$ /usr/bin/python --version
Python 3.6.7
The python docker library is only installed for python2 which causes
issues when running the purge-docker-cluster playbook. This playbook
uses the ansible docker modules and requires to have python bindings
installed on the remote host.
Without the bindings we can see python error reported by the docker
module.
msg: Failed to import docker or docker-py - No module named 'docker'.
Try `pip install docker` or `pip install docker-py` (Python 2.6)
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
sometimes those tasks might fail because of a timeout.
I've been facing this several times in the CI, adding this retry might
help and won't hurt in any case.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add a couple of fixes to allow containerized deployments upgrade support
to upgrade from luminous/mimic to nautilus.
- pass CEPH_CONTAINER_IMAGE and CEPH_CONTAINER_BINARY environment
variable to the ceph_key module,
- fix the docker exec command in 'waiting for the containerized monitor
to join the quorum' task according to the `delegate_to` parameter,
- override `docker_exec_cmd` in `ceph-facts` with `mon_host` when
rolling_update is `True`,
- do not run unnecessarily `create_mds_filesystems.yml` when performing an
upgrade.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This prevents the packaging from restarting services before we do need
to restart them in the rolling update sequence.
We want to handle services restart at rolling_update playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of nautilus, the initial keyrings list has changed, it means when
upgrading from Luminous or Mimic, it is expected there's a mismatch
between what is found on the cluster and the expected initial keyring
list hardcoded in ceph_key module. We shouldn't fail when upgrading to
nautilus.
str_to_bool() took from ceph-volume.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-Authored-by: Alfredo Deza <adeza@redhat.com>
rolling_update playbook already takes care of stopping/starting services
during the sequence. There's no need to trigger potential unwanted
services restart.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using osd_scenario lvm, we never check if the lvm2 package is
present on the host.
When using containerized deployment and docker on CentOS/RedHat this
package will be automatically installed as a dependency but not for
Ubuntu distribution.
OSD deployed via ceph-volume require the lvmetad.socket to be active
and running.
Resolves: #3728
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since all files in container image have moved to `/opt/ceph-container`
this check must look for new AND the old path so it's backward
compatible. Otherwise it could end up by templating an inconsistent
`ceph-osd-run.sh`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using monitor_address_block to determine the ip address of the
monitor node, we need an ip address available in that cidr to be
present in the ansible facts (ansible_all_ipv[46]_addresses).
Currently we don't check if there's an ip address available during
the ceph-validate role.
As a result, the ceph-config role fails due to an empty list during
ceph.conf template creation but the error isn't explicit.
TASK [ceph-config : generate ceph.conf configuration file] *****
fatal: [0]: FAILED! => {"msg": "No first item, sequence was empty."}
With this patch we will fail before the ceph deployment with an
explicit failure message.
Resolves: rhbz#1673687
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using community repository we need to set the priority on the
ceph repositories because we could have some conflict with EPEL
packages.
In order to set the priority on the ceph repositories, we need to
install the yum-plugin-priorities package.
http://docs.ceph.com/docs/master/install/get-packages/#rpm-packages
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the task will be delegated to mons[0] for all mgr hosts, so we can just run it on the first host and have the same effect.
Signed-off-by: wumingqiao <wumingqiao@beyondcent.com>
Currently the default crush rule value is added to the ceph config
on the mon nodes as an extra configuration applied after the template
generation via the ansible ini module.
This implies two behaviors:
1/ On each ceph-ansible run, the ceph.conf will be regenerated via
ceph-config+template and then ceph-mon+ini_file. This leads to a
non necessary daemons restart.
2/ When other ceph daemons are collocated on the monitor nodes
(like mgr or rgw), the default crush rule value will be erased by
the ceph.conf template (mon -> mgr -> rgw).
This patch adds the osd_pool_default_crush_rule config to the ceph
template and only for the monitor nodes (like crush_rules.yml).
The default crush rule id is read (if exist) from the current ceph
configuration.
The default configuration is -1 (ceph default).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1638092
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
With 3e32dce we can run OSD containers with numactl support.
When using numactl command in a containerized deployment we need to
be sure that the corresponding package is installed on the host.
The package installation is only executed when the
ceph_osd_numactl_opts variable isn't empty.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We don't need to set After=docker.service when the container_binary
variable isn't set to docker.
It doesn't break anything currently but it could be confusing when
using podman.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using subscription-manager with command module we can use
the rhsm_repository ansible module.
This module already uses repos list feature to determine if a
repository is enabled or not. That way this module is idempotent so
we don't need changed_when: false anymore.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph stable community repository only enables the basearch
packages url.
Adding the noarch url because starting with nautilus release, some
packages are added there and useful for mgr or grafana.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
After b8d580b and e9e5d5a we could have either item.min_size or
osd_pool_default_min_size using string instead of int causing the
condition to be true when it's false.
As a result, the task could try to set the pool min_size value to
0 which leads to:
Error EINVAL: pool min_size must be between 1 and 1
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Rishabh Dave
Guillaume Abrioux
Sébastien Han
Dimitri Savineau
Matthew Vernon
François Lafont
Ali Maredia
fpantano
wumingqiao