`requirements2.5.txt` is pointing to `tests/requirements2.4.txt` while
it should point to `requirements2.4.txt` since they are in the same
directory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6f489015e4)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
in `ceph-osd` there is no need to set `docker_exec_cmd` since the only
place where this fact is used is in `openstack_config.yml` which
delegate all docker command to a monitor node. It means we need the
`docker_exec_cmd` fact that has been set referring to `ceph-mon-*`
containers, this fact is already set earlier in `ceph-defaults`.
By the way, when collocating an OSD with a MON it fails because the container
`ceph-osd-{{ ansible_hostname }}` doesn't exist.
Removing this task will allow to collocate an OSD with a MON.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1584179
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 34e646e767)
For a few moment we can see failures in the CI for containerized
scenarios because VMs are running out of space at some point.
The default in the images used is to have only 3Gb for root partition
which doesn't sound like a lot.
Typical error seen:
```
STDERR:
failed to register layer: Error processing tar file(exit status 1): open /usr/share/zoneinfo/Atlantic/Canary: no space left on device
```
Indeed, on the machine we can see:
```
Every 2.0s: df -h Tue May 29 17:21:13 2018
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 3.0G 3.0G 14M 100% /
```
The idea here is to expand this partition with all the available space
remaining by issuing an `lvresize` followed by an `xfs_growfs`.
```
-bash-4.2# lvresize -l +100%FREE /dev/atomicos/root
Size of logical volume atomicos/root changed from <2.93 GiB (750 extents) to 9.70 GiB (2484 extents).
Logical volume atomicos/root successfully resized.
```
```
-bash-4.2# xfs_growfs /
meta-data=/dev/mapper/atomicos-root isize=512 agcount=4, agsize=192000 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0 spinodes=0
data = bsize=4096 blocks=768000, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 768000 to 2543616
```
```
-bash-4.2# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/atomicos-root 9.7G 1.4G 8.4G 14% /
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 34f7042852)
In the CI we can see at many times failures like following:
`Failure talking to yum: Cannot find a valid baseurl for repo:
base/7/x86_64`
It seems the fastest mirror detection is sometimes counterproductive and
leads yum to fail.
This fix has been added in the `setup.yml`.
This playbook was used until now only just before playing `testinfra`
and could be used before running ceph-ansible so we can add some
provisionning tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Erwan Velu <evelu@redhat.com>
(cherry picked from commit 98cb6ed8f6)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating mds on monitor node, the cephpfs will fail
because `docker_exec_cmd` is reset to `ceph-mds-monXX` which is
incorrect because we need to delegate the task on `ceph-mon-monXX`.
In addition, it wouldn't have worked since `ceph-mds-monXX` container
isn't started yet.
Moving the task earlier in the `ceph-mds` role will fix this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 608ea947a9)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Without the escalation, invocation from non-root
users with fail when accessing the rados config
object, or when attempting to log to /var/log
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1549004
Signed-off-by: Paul Cuzner <pcuzner@redhat.com>
(cherry picked from commit 2890b57cfc)
Signed-off-by: Sébastien Han <seb@redhat.com>
Since we fixed the `gather and delegate facts` task, this exception is
not needed anymore. It's a leftover that should be removed to save some
time when deploying a cluster with a large client number.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 828848017c)
Signed-off-by: Sébastien Han <seb@redhat.com>
We're doing this so we can validate this in the ceph-validate role
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 1f15a81c48)
The previous commit changed the content of roles/$ROLE/default/main.yml
so we have to re generate the group_vars files.
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 3c32280ca1)
Signed-off-by: Sébastien Han <seb@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move cephfs pools creation in `ceph-mds` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3a0e168a76)
Signed-off-by: Sébastien Han <seb@redhat.com>
let's move this variable in group_vars/all.yml in all testing scenarios
accordingly to this commit 1f15a81c48 so
we keep consistency between the playbook and the tests.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a10e73d78d)
Signed-off-by: Sébastien Han <seb@redhat.com>
When deploying a large number of OSD nodes it can be an issue because the
protection check [1] won't pass since it tries to create pools before all
OSDs are active.
The idea here is to move openstack pools creation at the end of `ceph-osd` role.
[1] e59258943b/src/mon/OSDMonitor.cc (L5673)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1578086
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 564a662baf)
Signed-off-by: Sébastien Han <seb@redhat.com>
6644dba5e3 and
1f15a81c48 introduced changes some changes
in defaults variables files but it seems we've forgotten to
regenerate the sample files.
This commit aims to resync the content of `all.yml.sample`,
`mons.yml.sample` and `rhcs.yml.sample`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f8260119cd)
Signed-off-by: Sébastien Han <seb@redhat.com>
The NSS PKI database is needed only if radosgw_keystone_ssl
is explicitly set to true, otherwise the SSL integration is
not enabled.
It is worth noting that the PKI support was removed from Keystone
starting from the Ocata release, so some code paths should be
changed anyway.
Also, remove radosgw_keystone, which is not useful anymore.
This variable was used until fcba2c801a.
Now profiles drives the setting of rgw keystone *.
Signed-off-by: Luigi Toscano <ltoscano@redhat.com>
(cherry picked from commit 43e96c1f98)
Signed-off-by: Sébastien Han <seb@redhat.com>
The LVM lvcreate fails if the disk already has a GPT header.
We create GPT header regardless of OSD scenario. The fix is to
skip header creation for lvm scenario.
fixes: https://github.com/ceph/ceph-ansible/issues/2592
Signed-off-by: Vishal Kanaujia <vishal.kanaujia@flipkart.com>
(cherry picked from commit ef5f52b1f3)
Signed-off-by: Sébastien Han <seb@redhat.com>
When running ansible2.4-update_docker_cluster there is an issue on the
"get current fsid" task. The current task only works for
non-containerized deployment but will run all the time (even for
containerized). This currently results in the following error:
TASK [get current fsid] ********************************************************
task path: /home/jenkins-build/build/workspace/ceph-ansible-prs-luminous-ansible2.4-update_docker_cluster/rolling_update.yml:214
Tuesday 22 May 2018 22:48:32 +0000 (0:00:02.615) 0:11:01.035 ***********
fatal: [mgr0 -> mon0]: FAILED! => {
"changed": true,
"cmd": [
"ceph",
"--cluster",
"test",
"fsid"
],
"delta": "0:05:00.260674",
"end": "2018-05-22 22:53:34.555743",
"rc": 1,
"start": "2018-05-22 22:48:34.295069"
}
STDERR:
2018-05-22 22:48:34.495651 7f89482c6700 0 -- 192.168.17.10:0/1022712 >> 192.168.17.12:6789/0 pipe(0x7f8944067010 sd=4 :42654 s=1 pgs=0 cs=0 l=1 c=0x7f894405d510).connect protocol feature mismatch, my 83ffffffffffff < peer 481dff8eea4fffb missing 400000000000000
2018-05-22 22:48:34.495684 7f89482c6700 0 -- 192.168.17.10:0/1022712 >> 192.168.17.12:6789/0 pipe(0x7f8944067010 sd=4 :42654 s=1 pgs=0 cs=0 l=1 c=0x7f894405d510).fault
This is not really representative on the real error since the 'ceph' cli is available on that machine.
On other environments we will have something like "command not found: ceph".
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit da5b104098)
During a rolling update, OSDs are restarted twice currently. Once, by the
handler in roles/ceph-defaults/handlers/main.yml and a second time by tasks
in the rolling_update playbook. This change turns off restarts by the handler.
Further, the restart initiated by the rolling_update playbook is more
efficient as it restarts all the OSDs on a host as one operation and waits
for them to rejoin the cluster. The restart task in the handler restarts one
OSD at a time and waits for it to join the cluster.
(cherry picked from commit c7e269fcf5)
Signed-off-by: Sébastien Han <seb@redhat.com>
During the transition from jewel non-container to container old ceph
units are disabled. ceph-disk can still remain in some cases and will
appear as 'loaded failed', this is not a problem although operators
might not like to see these units failing. That's why we remove them if
we find them.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1577846
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 49a4712485)
Signed-off-by: Sébastien Han <seb@redhat.com>
In order to ensure there is no leftover after having purged a cluster,
we must wipe all partitions properly.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1492242
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a9247c4de7)
there is some leftover on devices when purging osds because of a invalid
device list construction.
typical error:
```
changed: [osd3] => (item=/dev/sda sda1) => {
"changed": true,
"cmd": "# if the disk passed is a raw device AND the boot system disk\n if parted -s \"/dev/sda sda1\" print | grep -sq boot; then\n echo \"Looks like /dev/sda sda1 has a boot partition,\"\n echo \"if you want to delete specific partitions point to the partition instead of the raw device\"\n echo \"Do not use your system disk!\"\n exit 1\n fi\n echo sgdisk -Z \"/dev/sda sda1\"\n echo dd if=/dev/zero of=\"/dev/sda sda1\" bs=1M count=200\n echo udevadm settle --timeout=600",
"delta": "0:00:00.015188",
"end": "2018-05-16 12:41:40.408597",
"item": "/dev/sda sda1",
"rc": 0,
"start": "2018-05-16 12:41:40.393409"
}
STDOUT:
sgdisk -Z /dev/sda sda1
dd if=/dev/zero of=/dev/sda sda1 bs=1M count=200
udevadm settle --timeout=600
STDERR:
Error: Could not stat device /dev/sda sda1 - No such file or directory.
```
the devices list in the task `resolve parent device` isn't built
properly because the command used to resolve the parent device doesn't
return the expected output
eg:
```
changed: [osd3] => (item=/dev/sda1) => {
"changed": true,
"cmd": "echo /dev/$(lsblk -no pkname \"/dev/sda1\")",
"delta": "0:00:00.013634",
"end": "2018-05-16 12:41:09.068166",
"item": "/dev/sda1",
"rc": 0,
"start": "2018-05-16 12:41:09.054532"
}
STDOUT:
/dev/sda sda1
```
For instance, it will result with a devices list like:
`['/dev/sda sda1', '/dev/sdb', '/dev/sdc sdc1']`
where we expect to have:
`['/dev/sda', '/dev/sdb', '/dev/sdc']`
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1492242
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9cad113e2f)
Extra space in systemctl list-units can cause restart_osd_daemon.sh to
fail
It looks like if you have more services enabled in the node space
between "loaded" and "active" get more space as compared to one space
given in command the command[1].
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1573317
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 2f43e9dab5)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Check whether a mgr module is supposed to be disabled before disabling
it and whether it is already enabled before enabling it.
Signed-off-by: Michael Vollman <michael.b.vollman@gmail.com>
(cherry picked from commit ed050bf3f6)
Signed-off-by: Sébastien Han <seb@redhat.com>
A customer has been facing an issue when trying to override
`monitor_interface` in inventory host file.
In his use case, all nodes had the same interface for
`monitor_interface` name except one. Therefore, they tried to override
this variable for that node in the inventory host file but the
take-over-existing-cluster playbook was failing when trying to generate
the new ceph.conf file because of undefined variable.
Typical error:
```
fatal: [srvcto103cnodep01]: FAILED! => {"failed": true, "msg": "'dict object' has no attribute u'ansible_bond0.15'"}
```
Including variables like this `include_vars: group_vars/all.yml` prevent
us from overriding anything in inventory host file because it
overwrites everything you would have defined in inventory.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1575915
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 415dc0a29b)
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
During a minor update from a jewel to a higher jewel version (10.2.9 to
10.2.10 for example) osd flags don't get applied because they were done
in the mgr section which is skipped in jewel since this daemons does not
exist.
Moving the set flag section after all the mons have been updated solves
that problem.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1548071
Co-authored-by: Tomas Petr <tpetr@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit d80a871a07)
trying to set the default value for pg_num to
`hostvars[groups[mon_group_name][0]]['osd_pool_default_pg_num'])` will
break in case of external client nodes deployment.
the `pg_num` attribute should be mandatory and be tested in future
`ceph-validate` role.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f60b049ae5)
Signed-off-by: Sébastien Han <seb@redhat.com>
Until all the mons haven't been updated to Luminous, there is no way to
create a key. So we should do the key creation in the mon role only if
we are not part of an update.
If we are then the key creation is done after the mons upgrade to
Luminous.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Sébastien Han <seb@redhat.com>
(cherry picked from commit 52fc8a0385)
Signed-off-by: Sébastien Han <seb@redhat.com>
the role `ceph-mgr` that is played later in the playbook fails because
the destination path for the fetched keys is wrong.
This patch fix the destination path used in the task `fetch ceph mgr
key(s)` so there is no mismatch.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1b4c3f292d)
Signed-off-by: Sébastien Han <seb@redhat.com>
trying to mask target when `/etc/systemd/system/target.service` doesn't
exist seems to be a bug.
There is no need to mask a unit file which doesn't exist.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a145caf947)
The order of fs.aio-max-nr (which is hard-coded to 1048576) means that
if you set fs.aio-max-nr in os_tuning_params it will effectively be
ignored for bluestore scenarios.
To resolve this we should move the setting of fs.aio-max-nr above the
setting of os_tuning_params, in this way the operator can define the
value of fs.aio-max-nr to be something other than 1048576 if they want
to.
Additionally, we can make the sysctl settings happen in 1 task rather
than multiple.
(cherry picked from commit 08a2b58d39)
in tasks for os_family Red Hat we were missing this
fixes: bz1575859
Signed-off-by: Gregory Meno <gmeno@redhat.com>
(cherry picked from commit 26f6a65042)
Signed-off-by: Sébastien Han <seb@redhat.com>
On containerized deployment,
when upgrading from jewel to luminous, mgr keyring creation fails because the
command to create mgr keyring is executed on a container that is still
running jewel since the container is restarted later to run the new
image, therefore, it fails with bad entity error.
To get around this situation, we can delegate the command to create
these keyrings on the first monitor when we are running the playbook on the last monitor.
That way we ensure we will issue the command on a container that has
been well restarted with the new image.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1574995
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The Debian and SuSE installs for nfs-ganesha on the non-rhcs repository
requires you to allow_unauthenticated for Debian, and disable_gpg_check
for SuSE. The nfs-ganesha-rgw package already does this, but the
nfs-ganesha-ceph package will fail to install because of this same
issue.
This PR moves the installations to happen when the appropriate flags are
set to True (nfs_obj_gw & nfs_file_gw), but does it per distro (one for
SuSE and one for Debian) so that the appropriate flag can be passed to
ignore the GPG check.
there is no need to gather facts with O(N^2) way.
Only one node should gather facts from other node.
Fixes: #2553
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When 'ceph_nfs_disable_caching' is set to True, disable attribute
caching done by Ganesha for all Ganesha exports.
Signed-off-by: Ramana Raja <rraja@redhat.com>
If we are in a middle of an update we want to get the new package
version being installed so the task that copies the repo files should
not be skipped.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1572032
Signed-off-by: Sébastien Han <seb@redhat.com>
The apt-cache update can fail due to transient issues related to the
action being a network operation. To reduce the impact of these
transient failures this patch adds a retry to the update_cache task.
However, the apt_repository tasks which would perform an apt_update
won't retry the apt_update on a failure in the same way, as such this PR
moves the apt_update into an individual task, once per role.
Finally, the apt_repository tasks no longer have a changed_when: false,
and the apt_cache update is only performed once per role, if the
repositories change. Otherwise the cache is updated on the "apt" install
tasks if the cache_timeout has been reached.
the value in `docker_exec_client_cmd` doesn't allow to check for
existing pools because it's set with a wrong value for the entrypoint
that is going to be used.
It means the check were going to fail anyway even if pools actually exist.
Using jinja syntax to set `docker_exec_cmd` allows to handle the case
where you don't have monitors in your inventory.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If openstack_pools contains an application key it will be used to apply
this application pool type to a pool.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1562220
Signed-off-by: Sébastien Han <seb@redhat.com>
As of ceph 12.2.5 the type of the parameter `type` is not a name anymore but
an id, therefore an `int` is expected otherwise it will fail with the
following error
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In addition to b324c17 this commit fix the ceph uid for osd role in the
switch from non containerized to containerized playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If we don't do this, umounting devices declared like this
/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001
will fail like:
umount: /dev/disk/by-id/ata-QEMU_HARDDISK_QM000011: mountpoint not found
Since we append '1' (partition 1), this won't work.
So we need to resolved the link to get something like /dev/sdb and then
append 1 to /dev/sdb1
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Guillaume Abrioux
Paul Cuzner
Andrew Schoen
Sébastien Han
Luigi Toscano
Vishal Kanaujia
Subhachandra Chandra
Michael Vollman
Andy McCrae
Gregory Meno
Simone Caronni
Ramana Raja